Razor 13010400 user manual

Summary of the content on the page No. 1

TM
Spark & Spark™ DLX Scooters
Owner’s Manu
Read and understand this entire manual BEFORE
allowing child to use this product!
NOTE: Manual illustrations are for demonstration purposes only. Illustrations
may not reflect exact appearance of actual product. Specifications subject to
change without notice.
For assistance contact Razor. DO NOT RETURN TO STORE.
Item Number:
Black 13010400
Red 13010460
Blue 13010440
Pink 13010461
Spark DLX Blue 13010441
Version: 1_01_10
Spark DLX Red 130

Summary of the content on the page No. 2

CONTENTS Safety Warnings ......................................................... 1-2 Spark Scooter Parts List ................................................ 5 Before you begin ........................................................... 2 Safety Tips ..................................................................... 6 Set up and usage instructions .................................... 3-4 Warranty ........................................................................ 6 Check Before Ridin

Summary of the content on the page No. 3

SaFETy WaRNINgS PROPER RIDING ATTIRE WARNING: ALWAYS INSPECT SCOOTER PRIOR TO RIDING. Properly inspecting and maintaining your scooter can reduce the risk of injury. Always Always ensure child is wearing proper protective equipment such as an inspect your scooter before riding and regularly maintain it. approved safety helmet. A child should always wear shoes, never ride barefooted or in sandals, and keep shoelaces tied and out of the way of WARNING: CHECK LOCAL LAWS REG

Summary of the content on the page No. 4

SET UP aND USagE INSTRUCTIONS q Unfolding the scooter for first time use. WaRNINg: Failure to properly secure the spring-loaded buttons may cause the handlebars to dislodge while riding and may cause you to lose control and/or fall. When properly secured, the handlebars will not rotate and/ or move sideways. Note: When properly secured, the spring-loaded buttons will be clearly visible through the holes on the T-tube. 1 Insert and secure the left and 2 Make certain BOTH handleba

Summary of the content on the page No. 5

SET UP aND USagE INSTRUCTIONS q Replacing the Spark cartridge: Friction during sparking will eventually wear out the replaceable cartridge and cause the scooter to stop making sparks. Worn out cartridges must be replaced. WaRNINg: Do not attempt to replace cartridge immediately after riding as cartridge will be hot. Handle only when cool. WaRNINg: Keep fingers clear of Spark Bar hinge and fender brake. 1 Using your thumbs, press tabs 2 Place a new cartridge in back of th

Summary of the content on the page No. 6

CHECk BEFORE RIDINg q Wheels and Bearings WaRNINg: Wheelies Under normal circumstances and conditions, Razor wheels and bearings are maintenance free. Nonetheless, it is and other stunt-type riding reduces your ability to maneuver and control the responsibility of the owner or guardian to periodically inspect the wheels for wear and tear , the axle for proper tightness, and bearings for side-to-side play and loose parts. When a wheel or wheel bearing develops play, this is an the sc

Summary of the content on the page No. 7

SaFETy REMINDERS PRE-RIDE CHECkLIST Loose Parts Be Careful! Check and secure all fasteners before every ride. Make sure You will see people on TV and maybe even people you know doing q q the collar clamp, T-bar, quick release lever and handlebar spring tricks and stunts. These are people who have been practicing on buttons are locked properly in place before riding. scooters for a very long time. Do not try something until you are ready. Avoid steep inclines and don’t ride too fast — you c