Summary of the content on the page No. 1
671
OWNERS MANUAL
for
SS2 - SERIES
DUAL SATELLITE
COFFEE BREWERS
with
ELECTRO-MECHANICAL
CONTROL
and
EXTERNALLY HEATED
SATELLITE SERVERS
MODEL:
9220
9221
Includes:
Installation
Operation
Use & Care
Servicing Instructions
Model 9221 Dual Satellite Brewer
p/n 76601 Rev. E ECN-12814 M671 050113 cps
Summary of the content on the page No. 2
WARRANTY STATEMENT All electrical equipment manufactured by BLOOMFIELD It also does not apply if the serial nameplate has been INDUSTRIES is warranted against defects in materials and removed or unauthorized service personnel perform service. workmanship for a period of one year from the date of original The prices charged by Bloomfield Industries for its products installation or eighteen (18) months from the date of shipment are based upon the limitations in this warranty. Seller
Summary of the content on the page No. 3
TABLE OF CONTENTS Thank You for purchasing this WARRANTY STATEMENT xi Bloomfield Industries appliance. SPECIFICATIONS 1 Proper installation, professional FEATURES & OPERATING CONTROLS 2 operation and consistent PRECAUTIONS & GENERAL INFORMATION 4 maintenance of this appliance will AGENCY APPROVAL INFORMATION
Summary of the content on the page No. 4
FEATURES AND OPERATING CONTROLS Fig 1. SS-2 Satellite Brewing System Features & Operating Controls 2
Summary of the content on the page No. 5
FEATURES AND OPERATING CONTROLS (continued) Brewer Adjustable Legs Allows brewer to be leveled. Also allow clearance for cleaning underneath brewer. Brewing Controls Start or stop brew and select brew volume. Right and left section are independent. Bypass Nozzle Dilution water flows into brew chamber channel from here. Dilution water DOES NOT flow through the coffee grounds. Heater Switch Turns power to tank heater ON or OFF. Hot Water
Summary of the content on the page No. 6
GENERAL INFORMATION AND PRECAUTIONS This appliance is intended for use in commercial establishments WARNING: only. Electric This appliance is intended to brew hot beverage, specifically coffee, Shock hazard for human consumption. No other use is recommended or authorized All servicing requiring by the manufacturer or its agents. access to non-insulated Operators of this appliance must be familiar with the appliance use, electrical components limitations and associated restri
Summary of the content on the page No. 7
INSTALLATION INSTRUCTIONS INSTALL LEGS NOTE: To enable the installer to make The brewer is provided with 4" adjustable legs and rubber feet. Be a quality installation and to sure the legs are securely screwed into the base of the brewer, and minimize installation time, these that the rubber feet are properly installed. tests and suggestions should be completed before the actual LEVEL THE UNIT installation is begun. The adjustable legs allow the brewer to be leveled. Set t
Summary of the content on the page No. 8
INSTALLATION INSTRUCTIONS (continued) IMPORTANT: INITIAL SET-UP INSTRUCTIONS Initial set-up must be performed by a qualified installer or Plumber’s and Electrician’s installation procedures must be qualified service technician. completed before proceeding with the set-up. Improper set-up will damage the brewer and void the warranty. Be sure all electrical connections are secure, and that all plumbing connections are secure and leak-proof. IMPORTANT: Complete water line i
Summary of the content on the page No. 9
OPERATING INSTRUCTIONS Fig. 3 Control Panel GETTING STARTED Check the brewer and satellites: Check that the brewer is clean and the drip tray (if used) is empty. Check that the satellites are empty and clean with lids properly installed. Check the spray heads: Remove the brew chambers. Check the spray heads. Verify that the spray disks are clean and properly installed. Verify that the gaskets are prop
Summary of the content on the page No. 10
OPERATING INSTRUCTIONS (continued) BREWING COFFEE Fig. 4 Operating Controls Prepare the Brew Baskets: Make sure the bypass diverter is properly installed in each brew chamber. Insert one (1) Bloomfield paper filter into each brew chamber. Add a measured amount of grounds to each brew basket. Gently shake the basket to level the grounds. Slide one brew chamber under each brew head. Fig. 5 Brew Basket Insert Satellites: C
Summary of the content on the page No. 11
OPERATING INSTRUCTIONS (continued) WATER FLOW INLET The 9221-Series of brewers have two The INLET VALVE is controlled by a signal from the CONTROL independent brewing BOARD. If the WATER LEVEL PROBE does not detect water, the inlet systems sharing a solenoid is opened until water is again sensed. common hot water tank. BREW AND BYPASS The BREW VALVE fed by gravity from the hot water tank. The brew The hot water faucet is fed valve is opened for
Summary of the content on the page No. 12
CLEANING INSTRUCTIONS CLEANING INSTRUCTIONS CAUTION: PROCEDURE: Clean Coffee Brewer Burn Hazard PRECAUTIONS: Press POWER key to OFF. Allow brewer to cool. Brewing and serving temperatures of coffee are FREQUENCY: Daily extremely hot. TOOLS: Mild Detergent, Clean Soft Cloth or Sponge Hot coffee will cause Bristle Brush serious skin burns. 1. Press POWER key to OFF. Allo
Summary of the content on the page No. 13
CLEANING INSTRUCTIONS (continued) CAUTION: PROCEDURE: Clean Satellite Burn Hazard PRECAUTIONS: Drain Satellite before Cleaning Brewing and serving FREQUENCY: Twice Weekly temperatures of coffee are extremely hot. TOOLS: Sight Glass Brush, Sanitizer Soft Clean Cloth, Bucket Hot coffee will cause serious skin burns. 1. Remove and drain satellites. Remove lids. IMPORTANT: DO NOT submerge satellite in 2.
Summary of the content on the page No. 14
SERVICING INSTRUCTIONS CAUTION - PROCEDURE: Delime the Water Tank CHEMICAL BURN PRECAUTIONS: Disconnect brewer from electric power. HAZARD Allow brewer to cool. Deliming chemicals are caustic. Wear appropriate protective FREQUENCY: As required (Brewer slow to heat) gloves and goggles during this procedure. TOOLS: Deliming Solution Never siphon deliming Protective Gloves, Goggles & Ap
Summary of the content on the page No. 15
SERVICING INSTRUCTIONS (continued) 10. Reinstall tank lid assembly into hot water tank. Make sure NOTE: Normally, silicone the lid gasket is properly in place, then reinstall the hold- hoses do not need to be down clamps. delimed. Should deliming hoses become necessary, 11. Remove spray disks and gaskets. Rinse both brew heads Bloomfield recommends with clean water. Using a stiff brush, scrub spray disk to remove any l
Summary of the content on the page No. 16
SERVICING INSTRUCTIONS (continued) CAUTION: TIMER ADJUSTMENT SHOCK HAZARD PRECAUTIONS: Disconnect brewer from electric power. Allow brewer to cool. Disconnect brewer from electric power before opening the FREQUENCY: As required to adjust delivered volume access panel. TOOLS: Phillips head screwdriver Adjustments to be performed by Satellite or other container to calibrate volume qualifi
Summary of the content on the page No. 17
SERVICING INSTRUCTIONS (continued) CAUTION: TEMPERATURE ADJUSTMENT SHOCK HAZARD PRECAUTIONS: Disconnect brewer from electric power. Allow brewer to cool. Live electrical circuits are exposed during this procedure. FREQUENCY: As required to adjust delivered volume Use care to avoid uninsulated electrical connectors. TOOLS: Phillips head screwdriver Satellite or other container to cali
Summary of the content on the page No. 18
TROUBLESHOOTING SUGGESTIONS DESCRIPTION OF PROBLEM POSSIBLE CAUSE SUGGESTED REMEDY No lights or heat Unit not plugged in or circuit Restore electric power breaker tripped Power switch OFF Turn power switch ON No heat Hi-limit safety tripped Allow brewer to cool, verify water level, reset hi-limit Thermostat damaged Replace thermostat Damaged hi-limit safety Replace hi-limit Damaged heater switch Replace heater switch Damaged heating element Replace heating element Brewer overflo
Summary of the content on the page No. 19
SATELLITE EXPLODED VIEW & PARTS LIST SATELLITE MODEL 9440 4.3 4.1 4.2 2 4.6 4.8 4.7 4.5 4.4 4.10 PART OF ITEM 4 6 7 5 4 PL 9 1 8 11 10 2 PL 4 3 ITEM PART NO. DESCRIPTION QTY 1 WELDMENT, SATELLITE 1 2 83863 TANK LID ASSY 1 3 84313 HANDLE / FAUCET GUARD 1 4 86577 FAUCET & SHANK ASSY 1 4.1 86600 FAUCET, MODEL ESP 1 4.2 8700-25L SEAT CUP, #3S10 1 4.3 84392 HANDLE, #13SBE-SNAP 1 4.4 84394 C-RING #18-1 1 4.5 8600-26 NUT HEX 1 4.6 84395 SHANK
Summary of the content on the page No. 20
EXPLODED VIEW CABINET AND EXTERIOR COMPONENTS 18
