Summary of the content on the page No. 1
Register your product and get support at
Enregistrez votre produit et bénéficiez d’une assistance à l’adresse suivante
www.philips.com/welcome
AT940, AT921, AT893, AT890, AT753,
AT752, AT750
Summary of the content on the page No. 2
Summary of the content on the page No. 3
1
Summary of the content on the page No. 4
Summary of the content on the page No. 5
English 6 FrAnçAis (CAnAd A) 23 AT940,AT921,AT893,AT890,AT753,AT752,AT750
Summary of the content on the page No. 6
6 English introduction Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Please read this user manual, as it contains information about the wonderful features of this shaver as well as some tips to make shaving easier and more enjoyable. general description (Fig. 1) A Protection cap B Shaving unit C Shaving unit release button D Shaver on/off button (AT893/AT890/AT753/ AT752/
Summary of the content on the page No. 7
English 7 important Read this user manual carefully before you use the appliance and the charging stand (AT940/AT921 only). Save it for future reference. danger - Make sure the adapter does not get wet. Warning - The adapter contains a transformer. Do not cut off the adapter to replace it with another plug, as this causes a hazardous situation. - This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experien
Summary of the content on the page No. 8
8 English - Do not use the shaver, adapter or charging stand (AT940/AT921 only) if it is damaged, as this may cause injury. Always replace a damaged adapter or charging stand with one of the original type. - Charge and store the appliance at a temperature between 10°C and 35°C. - Always place and use the shaver and the charging stand (AT940/AT921 only) on a surface that is fluid-resistant. - Only use the adapter and the charging stand (AT940/AT921 only) supplied. - Always put the protect
Summary of the content on the page No. 9
English 9 Charging Note: The shaver cannot be used directly from the mains. AT940/AT921/AT893/AT890 only: It takes approx. 1 hour to fully charge the shaver. AT753/AT752/AT750: It takes approx. 8 hours to fully charge the shaver. When you charge the shaver for the first time or after a long period of disuse, let it charge until the white battery symbol lights up continuously (AT940/AT921) or the charging light lights up green continuously (AT893/AT890/AT753/AT752/AT750. A fully charged
Summary of the content on the page No. 10
10 English Quick charging (AT940/AT921/AT893/AT890 only) - AT940/AT921: When you start charging the empty battery, both the white battery symbol and the plug symbol flash. After approx. 3 minutes, the orange plug symbol goes out, while the battery symbol continues to flash. The shaver now contains enough energy for a 5-minute shave. - AT893/AT890: When you start charging the empty battery, the charging light alternately flashes orange and green. After approx. 3 minutes the charging ligh
Summary of the content on the page No. 11
English 11 - AT893/AT890/AT753/AT752/AT750: When the battery is fully charged, the charging light lights up green continuously. Note: After approx. 30 minutes, the charging light goes out to save energy. Charging with the adapter 1 Put the small plug in the shaver. 2 Put the adapter in the wall socket. , The charging light shows the charging status of the shaver (see section ‘Charge indications’ in this chapter). Charging in the charging stand (AT940/ AT921 only) 1 Put the small p
Summary of the content on the page No. 12
12 English shaving tips and tricks - This shaver is suitable for both wet and dry use. Use the shaver with shaving gel or foam for extra skin comfort, or use the shaver dry for extra convenience. Note: We advise you to use the shaver with shaving gel or foam when you use it for a wet shave. Do not use thick shaving cream or shaving oil with this shaver. - For optimal shaving results, make circular movements during use. - The shaver is waterproof and can be used in the bath or shower. -
Summary of the content on the page No. 13
English 13 Note: Rinse the shaver under the tap regularly to ensure that it continues to glide smoothly over your skin. 6 After shaving, press the on/off button once to switch off the shaver and dry your face. 7 Clean the shaver (see chapter ‘Cleaning and maintenance’). Note: Make sure you rinse all foam or shaving gel off the shaver. dry shaving 1 Press the on/off button once to switch on the shaver. 2 Move the shaving heads in circular movements over your skin. 3 After shavin
Summary of the content on the page No. 14
14 English 4 Clean the trimmer (see chapter ‘Cleaning and maintenance’). 5 Close the trimmer (‘click’). Cleaning and maintenance Never use compressed air, scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone to clean the shaver and the charging stand (AT940/AT921 only). Always unplug the shaver before you clean it under the tap. - Clean the shaver after every shave for optimal shaving performance. - Regular cleaning guarantees better shaving perfor
Summary of the content on the page No. 15
English 15 Cleaning the shaving unit under the tap 1 Switch off the shaver. 2 Press the release button to open the shaving unit. 3 Rinse the shaving unit and hair chamber under a hot tap for 30 seconds. Be careful with hot water. Always check if the water is not too hot, to prevent your hands from getting burnt. - Rinse the hair chamber and the inside of the shaving unit. - Rinse the outside of the shaving unit. 4 Close the shaving unit and shake off excess water. Be careful not
Summary of the content on the page No. 16
16 English Cleaning the shaving unit with the cleaning brush 1 Switch off the shaver. 2 Press the release button to open the shaving unit. 3 Pull the shaving unit off the shaver. 4 Turn the lock anticlockwise (1) and remove the retaining frame (2). 5 Remove and clean one shaving head at a time. Each shaving head consists of a cutter and a guard. Note: Do not clean more than one cutter and guard at a time, since they are all matching sets. If you accidentally mix up the cutters a
Summary of the content on the page No. 17
English 17 - Clean the inside and outside of the shaving guard with the brush. 6 Put the shaving heads back into the shaving unit. Make sure that the projections of the shaving heads fit exactly into the recesses. 7 Put the retaining frame back into the shaving unit and turn the lock clockwise. 8 Insert the lug of the shaving unit into the slot in the top of the shaver (1). Then close the shaving unit (2). Note: If the shaving unit does not close smoothly, check if you have insert
Summary of the content on the page No. 18
18 English Tip: For optimal trimming performance, lubricate the trimmer teeth with a drop of sewing machine oil every six months. storage There are several ways to store the shaver or to take it with you when you travel: - Always put the protection cap on the shaver to prevent damage. - AT940/AT921/AT893/AT890 only: Store the shaver in the pouch supplied. - AT940/AT921 only: Store the shaver in the charging stand. replacement For maximum shaving performance, we advise you to replace the
Summary of the content on the page No. 19
English 19 4 Turn the lock anticlockwise (1) and remove the retaining frame (2). 5 Remove the shaving heads and place new ones in the shaving unit. Make sure that the projections of the shaving heads fit exactly into the recesses. 6 Put the retaining frame back into the shaving unit and turn the lock clockwise. 7 Insert the lug of the shaving unit into the slot in the top of the shaver (1). Then close the shaving unit (2). Note: If the shaving unit does not close smoothly, check
Summary of the content on the page No. 20
20 English Environment - Do not throw away the appliance with the normal household waste at the end of their life, but hand them in at an official collection point for recycling. By doing this, you help to preserve the environment. - The built-in rechargeable shaver battery contains substances that may pollute the environment. Always remove the battery before you discard or hand in the shaver at an official collection point. Dispose of the battery at an official collection point for bat
