Summary of the content on the page No. 1
OPERATOR’S & PARTS MANUAL
ROTO-TILLER
SERIAL NUMBER: ___________________
Manual Number: MR15639
Models: LAF3438, LAF3452 & LAF3468
MODEL NUMBER: ___________________
Date: February 2007
800-747-2132 I www.paladinbrands.com 100 East Lee Road, Lee, IL 60530, United States of America
Summary of the content on the page No. 2
Summary of the content on the page No. 3
TABLE OF CONTENTS Introduction, General Information, Serial Number ……………………………………………….. 1 Owner and Operator Safety Information …………………………………………………………… 2-5 Definitions of Safety Terms and Symbols, Accident Prevention ……………………… 2 Safety Instructions ...............................……..…………………………………………… 3-4 Safety Signs ...............................…................................………………………………. 5 Power Unit Specifications, Mounting ……………………………………………………………… 6 Hydraulic Connection …………
Summary of the content on the page No. 4
DEFINITION OF SAFETY TERMS AND SYMBOLS Throughout this manual, the terms DANGER, WARNING, and CAUTION are used to indicate the degree of hazard to personnel if proper safety procedures are not followed. These words will be used in conjunction with the Safety Alert Symbol: a dark triangle containing a white exclamation mark. The Safety Alert Symbol means: ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED! Indicates an imminently hazardous situation which, if not avoided, DANGER WILL
Summary of the content on the page No. 5
SAFETY INSTRUCTIONS WORK SAFELY - A CAREFUL OPERATOR IS THE BEST INSURANCE AGAINST ACCIDENTS !! SECTION 1 Use the right tool for the job at hand. WARNING SECTION Make sure that your tools are in good condition for performing the desired function. WARNING When using tools, wear the protective equipment Obey all the safety instructions listed in this section and throughout this manual. specified by the tool manufacturer. (i.e. hardhat, Failure to obey instructions in this safety glasse
Summary of the content on the page No. 6
SAFETY INSTRUCTIONS WORK SAFELY - A CAREFUL OPERATOR IS THE BEST INSURANCE AGAINST ACCIDENTS !! WHEN MOUNTING THIS PRODUCT TO YOUR POWER UNIT: WARNING SECTION [CONTINUED] Refer to the operator’s manuals of your power unit, your loader, and your quick-attach for special or WARNING detailed mounting instructions. Obey all the safety instructions This product should fit onto the quick-attach or listed in this section and throughout loader arms of your power unit the same as the this m
Summary of the content on the page No. 7
SAFETY SIGN LOCATIONS ITEM QTY. PART # DESCRIPTION 1 1 50-0723 READ MANUAL 2 1 50-0724 HYDRAULIC 3 2 RDL3100 STAND CLEAR 4 1 RDL3178 NOT A STEP INSTRUCTIONS Keep all safety signs clean and legible. Replace all missing, illegible, or damaged safety signs. Replacement parts for parts with safety signs attached must also have safety signs attached. Safety signs are available, free of charge, from your dealer or from FFC Attachments. PLACEMENT OR REPLACEMENT OF ITEM 1 SAFETY SIGNS
Summary of the content on the page No. 8
POWER UNIT SPECIFICATIONS IMPORTANT Exceeding any of the maximum recommended power unit specifications CAN result in damage to this product and WILL void all FFC Attachments warranties. DESCRIPTION SPECIFICATIONS Weight of Power Unit without Planer 11,000 lbs. maximum Operating Capacity of Power Unit’s loader 3,750 lbs. maximum Lift Capacity of Power Unit’s loader 7,500 lbs. maximum Hydraulic Pressure Output 3,500 psi. maximum Rear Ballast As required to maintain full p
Summary of the content on the page No. 9
ROTO-TILLER OPERATION SAFETY FIRST!! READ AND UNDERSTAND THE SAFETY INSTRUCTIONS (pages 2-5 of this manual) BEFORE BEGINNING ANY ROTO-TILLER OPERATION WARNING Failure to obey the following procedures could result in death or serious injury. Never lift the lowest portion of this product higher than 1’-0” above the ground while operating. Do not lock the auxiliary hydraulics of your power unit in the “ON” position. Keep everyone at least nine feet away from the unit when operating. This
Summary of the content on the page No. 10
ROTO-TILLER SERVICE SAFETY FIRST!! READ AND UNDERSTAND THE SAFETY INSTRUCTIONS (pages 2-5 of this manual) BEFORE BEGINNING ANY ROTO-TILLER SERVICE Removing Wire, Twine, Weeds, etc. that are Wrapped Around the Roller 1. Park your power unit on a level surface with this product properly attached. 2. Place your power unit’s transmission in “Park” and engage the parking brake. 3. Lower this product onto preplaced blocking that will support the motor guards of this product so that the tines are
Summary of the content on the page No. 11
PARTS ILLUSTRATION 9
Summary of the content on the page No. 12
ROTO-TILLER: PARTS LIST LAF3438 LAF3452 LAF3468 ITEM QTY. 38” 52” 68” DESCRIPTION 1 1 DHF2021 Chain: 18 links 20 2 varies (28) (36) LAF3400 Tine 3 varies (1) (2) (2) LAF3401 Motor Guard 4 varies (1) (2) (2) LAF3402 Motor Mounting Plate 5 varies (1) (2) (2) LAF3403 Motor-Tine Shaft Coupler LAF3416 6 1 LAF3404 LAF3408 Shroud LAF3414 7 1 LAF3405 LAF3409 Hinged Shroud Panel LAF3415 8 1 LAF3406 LAF3411 Hinge Pin LAF3413 9 1 LAF3407 LAF3410 Tine Shaft Weldment Not Used 10 1 LAF3412 Guss
Summary of the content on the page No. 13
ROTO TILLER SPECIFICATIONS Model Overall Overall Overall Offset to Torque @ Shipping Number Width Height Depth Right 2,500 psi Weight LAF3438 53” 27” 27” varies 469 ft. lbs. 450 lbs. LAF3452 67-13/16” 27” 33-1/2” 12-1/2” 939 ft. lbs. 600 lbs. LAF3468 78-1/4” 27” 33-1/2” 4-3/4” 939 ft. lbs. 695 lbs. All replacement hydraulic hoses must have a minimum rated working pressure of 4,000 psi. TORQUE SPECIFICATIONS FOR STANDARD MACHINE HARDWARE (FOR REFERENCE ONLY) Bolt Size SAE Grade Bolt
Summary of the content on the page No. 14
PLEASE TRI-FOLD AND AFFIX TAPE HERE Warranty Registration Form and Delivery Inspection Report IMPORTANT! Warranty Void if card is not returned with 10 days. All Applicable sections must be filled in. This section to be filled out and signed by Dealer at time of delivery. Warranty Registration Customer’s Name Dealer’s Name Address Address City State Zip City State Zip Phone CHECK ONE: Loader / Tractor Model Construction Use Delivery Date Agricultural Use Model or Part # Landscape Use Serial # Oth
Summary of the content on the page No. 15
FFC LIMITED 12 MONTH WARRANTY Thank you for purchasing a FFC product. Warranty protection is valid only when this Warranty Registration is completed and signed by the customer and dealer, and mailed to FFC. I hereby acknowledge that I have received a copy of the owners Limited Warranty and I accept the terms therein. For a period of 12 months from date of delivery of product to the original user, FFC, warrants each product to be free from manufacturing defects, subject to the limitations contai
