Summary of the content on the page No. 1
Cable Free Weather Station
Model: BAR928
User Manual
BAR928-E Cover R1 OP 1 8/21/04, 11:55 PM
Black
Summary of the content on the page No. 2
CABLE FREE WEATHER STATION MODEL: BAR928 USER’S MANUAL INTRODUCTION Congratulations on purchasing the BAR928 Top Weather Station. The BAR928 is an all-in-one clock and weather device. RF- control- led, it can automatically synchronize its current time and date when it is brought within an approximate 1500km radius of the radio signal generated from Frankfurt, Germany (DCF77). The BAR928 does weather forecasts and tells temperatures, indoors RADIO RECEPTION SIGNAL A and outdoors. It also shows th
Summary of the content on the page No. 3
H PRESSURE UNIT SLIDE SWITCH A LCD Selects between mb/hPa and inHg display Displays the current temperature monitored by the remote unit S MOON PHASE SCANNER LED INDICATOR B Displays the current moon phase or that of the date checked Flashes when the remote unit transmits a reading THERMO BUTTON T C °C/°F SLIDE SWITCH Sets the unit in indoor or outdoor-remote temperature mode Selects between Centigrade (°C) and Fahrenheit (°F) MEMORY BUTTON U RESET BUTTON Displays the maximum or minimum temperat
Summary of the content on the page No. 4
BATTERY INSTALLATION: MAIN UNIT - Strong 1. Gently press and lift the tab on the battery compartment door. 2. Insert four UM3 or AA-size batteries. - Weak - No signal - Receiving 3. Replace the battery compartment door. Replace the batteries when the BATT indicator on the weather forecast window lights up. HOW TO SET THE CLOCK MANUALLY When the current time is displayed, press MODE for three seconds. HOW TO USE THE BACKLIGHT The 12-hr or 24-hr digits will flash. Use the UP or DOWN button to sele
Summary of the content on the page No. 5
MULTILINGUAL DAY-OF-THE-WEEK NOTE ON OUTDOOR-REMOTE TEMPERATURE The display language of the day-of-the-week is selected in the calendar setting procedure. The foreign languages and their mean- Once batteries are in place for the remote unit, it will start transmit- ings are as follows: ting samplings at 30-second intervals. Language Monday Tuesday Wednesday Thursday Friday Saturday Sunday If no signals are received when the outdoor-remote temperature is selected, blanks will be displayed. Press
Summary of the content on the page No. 6
NOTE: HOW TO USE AND SCAN 1. The accuracy of a general pressure-based weather forecast is THE MOON PHASE about 70 to 75%, and therefore, cannot be held responsible for any inconveniences so caused by an inaccurate forecast. The BAR928 is equipped with a moon phase display and scanner with which eight moon phases are displayed on the screen from new 2. The weather forecast is meant for the next 12 to 24 hours. It may moon to waning crescent. The one falls on the current day will flash not necess
Summary of the content on the page No. 7
Temperature resolution : 0.1°C (0.2°F) HOW TO RESET THE UNIT Remote Temperature measurement The RESET button allows you to return all settings to its factory Displayed OUT temperature range : -50.0°C to +70.0°C values. The button is required only when the unit is not operating in (-58.0°F to 158.0°F) a favorable way, such as in the rare case of a malfunction. Proposed operating range : -5.0°C to +50.0°C The RESET button is located inside the battery compartment door. (23.0°F to 122.0°F) To us
Summary of the content on the page No. 8
EC-DECLARATION OF CONFORMITY CAUTION This product contains the approved transmitter module that complies — The content of this manual is subject to change without with the essential requirements of Article 3 of the R&TTE 1999 / 5 / EC further notice. Directive, if used as intended and the following standards have been — Due to printing limitations, the displays shown in this applied: manual may differ from the actual display. — The manufacturer and its suppliers hold no Safety of information tec
Summary of the content on the page No. 9
© 2004 Oregon Scientific. All Rights Reserved. 086-001853-226 BAR928-E Back R1 OP 1 8/21/04, 11:55 PM Black
