Oregon Scientific Mirror Weather Station MR238 user manual

Summary of the content on the page No. 1

INTRODUCTION
Mirror Weather Station
Thank you for selecting the Oregon Scientific™ MR238 Mirror Weather Station.
Model: MR238
This powerful device bundles time keeping, weather forecasting, indoor and
outdoor temperature and humidity readings into a single mirror display you can
User Manual
use from the convenience of your home.
In this box, you will find:
CONTENTS
• Main unit (MR238) with wall-mount holder
Introduction ............................................................................

Summary of the content on the page No. 2

PRODUCT OVERVIEW FRONT VIEW 1. ALARM ON/OFF button – activate / deactivate alarm 2. Mirror display 1 3. VFD display (Vacuum Fluorescent Display) 4. DOWN button - decrease setting / deactivate radio-controlled clock 2 5. UP button - increase setting / activate radio-controlled clock 6. CLOCK button - changes settings and display 7. LED light-bars – turn on when the VFD display is ON 7 8. ACTIVE / SNOOZE touch panel – snooze function / activate display 9. CHANNEL button - switch remote sensor disp

Summary of the content on the page No. 3

REMOTE SENSOR (RTGR328N) REMOTE SENSOR – BACK VIEW 1 2 3 1 4 5 2 6 7 3 8 1. Wall mount 1. LCD display 2. CHANNEL switch (1-5) 2. LED status indicator 3. RESET 3. Ventilation duct 4. °C / °F switch 5. SEARCH REMOTE SENSOR LCD DISPLAY 6. EU / UK radio signal format switch 4 7. Battery compartment 8. Fold-out stand 1 2 5 6 3 7 1. Signal reception 2. Channel number 3. Low battery icon 4. Time 5. Temperature (°C or °F) 6. Humidity % 7. Temperature / Humidity 3 EN

Summary of the content on the page No. 4

GETTING STARTED VFD DISPLAY INSTALLING THE WALL-MOUNT HOLDER ACTIVATE / DEACTIVATE THE DISPLAY To install the wall-mount holder: Slide the VFD control switch at the back of the weather station to different display options: 1. Use the diagram provided to mark where the 6 screws will be drilled. 2. Drill the screws into the wall to affix the wall-mount holder. • Display ON – The VFD display and the LED light bars will always be on. 3. Put on the wall-mount cover. • Display OFF – The VFD dis

Summary of the content on the page No. 5

SENSOR DATA TRANSMISSION SET CLOCK Data is sent from the sensor(s) every 60 seconds. The reception icon shown You only need to do this if you have disabled the radio-controlled clock (or if you indicates the status. are too far from a RF signal). ICON DESCRIPTION 1. Press and hold CLOCK for 2 seconds. 2. Select the time zone offset hour (+ / -23 hours), 12 / 24-hour format, hour, Main unit is searching for sensors. minute, year, date / month format, month, day and display language. 3. Press UP o

Summary of the content on the page No. 6

TEMPERATURE AND HUMIDITY TREND LINES WEATHER FORECAST The trend lines are shown next to the temperature and humidity readings. This product forecasts the next 12 to 24 hours of weather within a 30-50 km (19- 31 mile) radius. The forecast is based on barometric pressure trend readings. TREND RISING STEADY FALLING The top area shows an animated icon indicating the forecasted weather. TEMPERATURE WEATHER FORECAST ICONS HUMIDITY ICON DESCRIPTION Clear COMFORT ZONE Day / Night The Comfort Zone indica

Summary of the content on the page No. 7

ABOUT OREGON SCIENTIFIC SPECIFICATIONS Visit our website (www.oregonscientific.com) to learn more about Oregon MAIN UNIT DIMENSIONS Scientific products such as digital cameras; MP3 players; children's electronic L x W x H 330 x 42 x 207 mm learning products and games; projection clocks; health and fitness gear; weather (12.99 x 1.65 x 8.15 inches) stations; and digital and conference phones. The website also includes contact information for our customer care department in case you need to reach

Summary of the content on the page No. 8

© 2004 Oregon Scientific. All rights reserved. P/N: 086-003642-019 8 EN

Summary of the content on the page No. 9

Mirror Weather Station Model: MR238 User Manual 9 EN