Summary of the content on the page No. 1
OPERATION AND PARTS MANUAL
STREET PRO 1 SERIES
MODEL SP1CE13H18
CONCRETE/ASPHALT SAW
(HONDA GX390 GASOLINE ENGINE)
Revision #3 (06/09/08)
To find the latest revision of this
publication, visit our website at:
www.multiquip.com
THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
P/N 35213
Summary of the content on the page No. 2
MQ STREET PRO 1 CE SAW — PROPOSITION 65 WARNING Engine exhaust and some of its constituents, and some dust created by power sanding, sawing, grinding, drillingandotherconstructionactivities contains chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. Some examples of these chemicals are: Leadfromlead-basedpaints. Crystallinesilicafrombricks. Cementandothermasonryproducts. Arsenicandchromiumfromchemically treatedlumber. Your risk from these expos
Summary of the content on the page No. 3
MQ STREET PRO 1 CE SAW — SILICOSIS/RESPIRATORY WARNINGS WARNING WARNING SILICOSIS WARNING RESPIRATORY HAZARDS Grinding/cutting/drillingofmasonry,concrete,metaland Grinding/cutting/drillingofmasonry,concrete,metaland othermaterialswithsilicaintheircompositionmaygive other materials can generate dust, mists and fumes off dust or mists containing crystalline silica. Silica is a containing chemicals known to cause serious or fatal basiccomponentofsand,quartz,brickclay,graniteand injury or illness, s
Summary of the content on the page No. 4
MQ STREET PRO 1 CE SAW — TABLE OF CONTENTS Proposition 65 Warning ............................................. 2 HONDA GX390K1QWT2/ Silicosis/Respiratory Warnings .................................. 3 GX390U1QWT2 ENGINE Table Of Contents ..................................................... 4 Air Cleaner Assembly......................................... 48-49 Parts Ordering Procedures ....................................... 5 Camshaft Assembly ...........................................50-51 Sa
Summary of the content on the page No. 5
PARTS ORDERING PROCEDURES Ordering parts has never been easier! Choose from three easy options: Effective: st January 1 , 2006 Best Deal! Order via Internet (Dealers Only): If you have an MQ Account, to obtain a Order parts on-line using Multiquip’s SmartEquip website! Username and Password, E-mail us at: parts@multiquip.com. ■ View Parts Diagrams To obtain an MQ Account, contact your ■ Order Parts District Sales Manager for more information. ■ Print Specification Information Use the internet an
Summary of the content on the page No. 6
NOTES PAGE 6 — SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08)
Summary of the content on the page No. 7
MQ STREET PRO 1 CE SAW — SAFETY MESSAGE ALERT SYMBOLS FOR YOUR SAFETY AND THE SAFETY OF OTHERS! HAZARD SYMBOLS Safety precautions should be followed at all times when operating this equipment. Failure to read, understand and comply with the Lethal Exhaust Gases Safety Messages and Operating Instructions could result in injury to yourself or others. Engine exhaust gases contain poisonous carbon monoxide. This gas is colorless and NOTE odorless, and can cause death if inhaled. NEVER operate t
Summary of the content on the page No. 8
MQ STREET PRO 1 CE SAW — SAFETY MESSAGE ALERT SYMBOLS Accidental Starting Respiratory Hazard ALWAYS place the engine ON/OFF switch in the OFF position, when the saw ALWAYS wear approved respiratory protection. is not in use. Over Speed Conditions Sight and Hearing hazard NEVER tamper with the factory settings of the engine governor. Personal injury and damage ALWAYS wear approved eye and hearing to the engine or equipment can result if protection. operating in speed ranges above maximum allow
Summary of the content on the page No. 9
MQ STREET PRO 1 CE SAW — RULES FOR SAFE OPERATION ■ NEVER operate this equipment when not feeling well due to RULES FOR SAFE OPERATION fatigue, illness or taking medicine. ■ NEVER operate the saw under the influence or drugs or alcohol. WARNING ■ Replace nameplate, operation and safety decals when they Failure to follow instructions in this manual may lead to become difficult to read. serious injury or even death! This equipment is to be operated by trained and qualified personnel only! This
Summary of the content on the page No. 10
MQ STREET PRO 1 CE SAW — RULES FOR SAFE OPERATION General Safety Diamond Blade Safety ■ ALWAYS read, understand, and follow procedures in ■ Use appropriate steel centered diamond blades Operator's Manual before attempting to operate equipment. manufactured for use on concrete saws. See further blade information on pages 17 to 19. ■ ALWAYS be sure the operator is familiar with proper safety precautions and operating techniques before using the saw. WARNING ■ NEVER leave the machine unattended
Summary of the content on the page No. 11
C R O N N E O O D I I T T MQ STREET PRO 1 CE SAW — RULES FOR SAFE OPERATION Saw Transportation Safety Machine Operation And Safety Decals ■ DO NOT use the handle bars and/or front pointer as lifting The SP 1 saw is equipped with a number of operation and safety points. decals. (Figure 1) Should any of these decals become unreadable, replacements can be obtained from your dealer. ■ ALWAYS use ramps capable of supporting the weight of the saw and the operator to load and unload the saw. If the s
Summary of the content on the page No. 12
MQ STREET PRO 1 CE SAW — SPECIFICATIONS (SAW) C G B A F E Side View D Front View Figure 2. SP 1 Dimensions Table 1. SP 1 (SP1CE13H18) Specifications REFERENCE LETTER DESCRIPTION DIMENSION (cm) Height A 37.0 In. (94 cm) Length (Front Pointer Raised) 32.0 In. (80 cm) B Maximum Length (Front Pointer Lowered) 54.5 In. (138 cm) C Width 21.5 In. (55 cm) D E Rear Wheel Base 17.0 In. (40 cm) Front Wheel Base 10.0 In. (25.4 cm) F Handle Bar Width 21.5 In. (55 cm) G Maximum Spindle RPM 2836 RPM Arbor Siz
Summary of the content on the page No. 13
MQ STREET PRO 1 CE SAW — SPECIFICATIONS (ENGINE) Table 2. Specifications (Engine) HONDA Model GX390K1QWT2/GX390U1QWT2 Air-cooled 4 stroke, Single Type Cylinder, OHV, Gasoline Engine 3.5 in. X 2.5 in. Bore X Stroke (88 mm x 64 mm) D) isplacement 23.7 cu-in. (389 cc M. ax Output 13.0 H.P./3600 R.P.M Engine Approx. 1.72 U.S. Gallons Fuel Tank Capacity (6.5 Liters) Unleaded Automobile Gasoline Fuel 86 Octane or higher L) ube Oil Capacity 1.16 US qt (1.1 liter Speed Control Centrifugal Fly-weight Ty
Summary of the content on the page No. 14
MQ STREET PRO 1 CE SAW — GENERAL INFORMATION Power Plants Intended Use The SP1 saw is classified in the industry as a "low" powered saw. Operate the SP1 Saw, tools and components in accordance This classification is particularly useful when selecting the proper with the manufacturer's instructions. Use of any other tools for diamond blade for an application. stated operation is considered contrary to designated use. The risk of such use lies entirely with the user. The manufacturer The SP1
Summary of the content on the page No. 15
MQ STREET PRO 1 CE SAW — CONTROLS & COMPONENTS CONTROLS & COMPONENTS 10. Belt Tension Adjuster – Adjusts belt tension. Figures 4 shows the location of the basic controls or components 11. Front Pointer – Front pointer wheel assists in straight for the SP 1. Listed below is a brief explanation of each control or tracking. component. 12. Front Pointer Arm – Stows up for storage and pivots down for use. 1. Hand Grips/Handlebar – When operating the saw, place both hands on each grip to maneuver th
Summary of the content on the page No. 16
MQ STREET PRO 1 CE SAW — BASIC ENGINE BASIC ENGINE Figure 5. Engine Controls and Components 6. Choke Lever – Used in the starting of a cold engine, or in Initial Servicing cold weather conditions. The choke enriches the fuel The engine (Figure 5) must be checked for proper lubrication and mixture. filled with fuel prior to operation. Refer to the manufacturers engine 7. Air Cleaner – Prevents dirt and other debris from entering manual for instructions & details of operation and servicing. th
Summary of the content on the page No. 17
MQ STREET PRO 1 CE SAW — PREPARATION/PRE-INSPECTION PREPARATION / PRE-INSPECTION Reference manufacturer engine 1. Read and fully understand this manual, NOTE manual for specific servicing the safety intructions in particular, and instructions. the engine manufacturer's manual supplied with the saw. UPPER LIMIT 2. Select the correct blade for each application. Refer to the Blades and Blade Placement sections on pages 17 through 19 for further information. 3. Check blade for wear or damage. Han
Summary of the content on the page No. 18
MQ STREET PRO 1 CE SAW — PREPARATION/PRE-INSPECTION V-belt Alignment and Tensioning Guards And Covers This saw is equipped with premium V-belts that have been WARNING aligned and tensioned by factory personnel. The V-belt must be NEVER operate the saw without blade aligned and tensioned for proper operation of the saw. guards and covers in place. DO NOT Use the following procedure to check the alignment of V-belt: operate with the front of the blade guard raised. The blade exposure cannot ex
Summary of the content on the page No. 19
MQ STREET PRO 1 CE SAW — BLADES 1. Drive Pin Hole – A commonly located hole on the diamond SPECIFIC TOOLS TO BE USED blade core that prevents operational blade slippage between the inner & outer blade flanges (collars). Inspect This saw is to use tools (blades) as follows: the diameter of the hole to ensure there is no distortion, Steel Core Segmented or Continuous Diamond Rim and that a snug fit develops between the hole and drive Cutting Wheel. pin. Any other type of tool is not to be used.
Summary of the content on the page No. 20
MQ STREET PRO 1 CE SAW — BLADE PLACEMENT Table 4. MATERIAL LISTING AND BLADE SELECTION Me aterial Blad Ce ured Concrete Cured Concrete Blad Ge reen Concrete Green Concrete Blad Ae sphalt Asphalt Blad Ae sphalt over Concrete Asphalt/Concrete Blad Be lock, Brick, Masonry, Refractories Masonry Blad Te ile, Ceramic, Stone Tile Blad BLADE PLACEMENT Diamond Blades Selecting the diamond blade TYPE and GRADE defines how WARNING the blade will perform both in cutting speed and blade life. Selection of
