Summary of the content on the page No. 1
DCR-9/DCR-209
FMRDS/DABdigitalclockradio
Operatinginstruction
GB
Moded’emploi
F
Instruccionsdemanejo
E
Gebruiksaanwijzing
NL
Bedienungsanleitung
D
WARNING:
TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO
NOT EXPOSETHIS PRODUCT TO RAINOR MOISTURE.
CAUTION
RISKOFELECTRIC
SHOCKDONOT OPEN
!
THE LIGHTNING FLASHAND
THEEXCLAMATIONPOINT
ARROW- HEAD WITHIN THE CAUTION: TO REDUCE THE RISK OF WITHIN THE TRIANGLE IS A
TRIANGLE IS A WARNING SIGN ELECTRIC SHOCK, DO NOT REMOVE
WARNING SIGN ALERTING
ALERTING YOU O
Summary of the content on the page No. 2
Contents Snooze function .............................................................. 18 IMPORTANTSAFETYINSTRUCTIONS ....................... 2 Controls ..........................................................................3-4 Sleep timer...................................................................... 19 Mains operation................................................................. 5 Headphone socket.......................................................... 20 Operating your radio -
Summary of the content on the page No. 3
IMPORTANTSAFETYINSTRUCTIONS 11. Only use attachments/accessories specified by the 1. Read these instructions. manufacturer. 2. Keep these instructions. 12. Use only with the cart, stand, tripod, bracket, or table specified 3. Heed all warnings. by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination 4. Follow all instructions. to avoid injury from tip-over. 5. Do not use this apparatus near water. 13. Unplug this apparatus duri
Summary of the content on the page No. 4
Controls(Front) 1. StandBy button 2. Autotune button 3. Waveband button 4. Light button 3
Summary of the content on the page No. 5
Controls(Top) GB 5. Telescopic aerial 6. Headphone socket 7. Select button 8. Volume up/down buttons 9. Tuning up/down buttons 10. Preset buttons 11. Info button 4
Summary of the content on the page No. 6
Mainsoperation 1. Place the unit on a flat surface. Plug the mains lead into a wall socket and switch on the wall socket. 2. The display will show "DAB digital radio" for a few seconds before returning to clock display. 3. The clock time will be automatically set after your clock radio has been has been tuned to a DAB station for a few minutes. 5
Summary of the content on the page No. 7
Operating yourradio - DAB 1. Fully extend the telescopic aerial. 2. Press the StandBy button to switch on your radio. 3. If this is the first time the radio is used a quick scan DAB channels will be carried out. The display will show "Autotune Quick scan". If the radio has been used before the last used station will be selected. GB 4. During Autotune as each group of stations is detected the bottom line of the display will show its name and the station count will be updated. The top line of the
Summary of the content on the page No. 8
Selecting a station - DAB 1. The top line of the display shows the name of the station currently selected. 2. Press the Tuning up or down buttons to step through the list of available stations. 3. Press and release the Select button to select the station. The display may show "Tuning" while your radio finds the new station. 4. Adjust the Volume control to the required setting. Note: If after selecting a station the display shows "Not Available" it may be necessary to relocate your radio to a pos
Summary of the content on the page No. 9
Secondaryservices-DAB 1. Certain radio stations have one or more secondary services associated with them. If a station has a secondary service associated with it the display will show " " next to the station name on the station list. The secondary service will then appear immediately after the primary service as you move through the tuning list. Displaymodes-DAB Your radio has five display modes:- GB 1. Press the Info button to cycle through the various modes. a. Scrolling text Displays scrollin
Summary of the content on the page No. 10
Findingnewstations-DAB As time passes new stations may become available. To find new stations proceed as follows:- 1. Press and release the AutoTune button, the display will show "Autotune Quick Scan". Your radio will perform a scan of the DAB frequencies. As new stations are found the station counter on the right-hand side of the display will increase and stations will be added to the list 2. To carry out a full scan of the entire DAB Band III frequencies press and hold down the AutoTune button
Summary of the content on the page No. 11
ManualTuning -DAB Manual tuning allows you to tune directly to the various DAB Band III channels. 1. Press and hold in theSelectbutton until the display shows "Manual tune". 2. Press the Tuning up or down buttons to find the required DAB channel. GB 3. Press and release the Select button to select the channel. 4. Press the Tuning up or down buttons to select the stations contained within the Multiplex for the selected DAB channel. 5. Press and release the Select button to return to normal tuning
Summary of the content on the page No. 12
Operating your radio - FM 1. Fully extend the telescopic aerial. 2. Press the StandBybutton to switch on your radio. The display will show "DAB digital radio" for a few seconds. 3. Press the Band button to select the FM band. 4. Press and immediately release the Auto Tune button, your radio will scan in an upwards direction (low frequency to high frequency) and stop automatically when it finds a station of sufficient strength. 5. After a few seconds the display will update and show station name.
Summary of the content on the page No. 13
Manual tuning - FM 1. Press the StandBy button to switch on your radio. 2. Press the FM/DAB button to select the FM band. Fully extend the Telescopic aerial . 3. Press the Tuning up or down buttons to tune to a station. The frequency will change in steps of 50kHz. 4. When the waveband end is reached the radio will recommence GB tuning from the opposite waveband end. 5. Set the Volume control to the desired setting. 6. To switch off your radio press the StandBy button. 12
Summary of the content on the page No. 14
Displaymodes-FM On FM the bottom line of the display can be set to any of the following modes:- 1. Press the Info button to cycle through the various modes. a. Scrolling text Displays scrolling text messages such as artist/track name, phone in number etc. b. Program Type Displays type of station being listened to e.g. Pop, Classic, News, etc. c. Signal strength Displays signal strength for station being listened to. d. Time and date Displays current time and date. e. Frequency Displays frequency
Summary of the content on the page No. 15
Presettingstations-DABandFM There are 5 memory presets for each of the 2 wavebands. 1. Press the StandBy button switch on the radio. 2. Tune to the required station as previously described. 3. Press and hold down the required Preset button until the display shows e.g. "Preset 1 stored". The station will be stored under the chosen preset button. Repeat this procedure for the remaining GB presets. 4. Stations stored in preset memories may be overwritten by following the above procedure. Recallinga
Summary of the content on the page No. 16
Systemreset If your radio fails to operate correctly, or some digits on the display are missing or incomplete carry out the following procedure. 1. Press and hold in the Info button until the display shows the software version. 2. Press the Info button twice the display will show System reset. 3. Press in and release the Select button to select System reset. 4. If DAB was used last then a "Quick scan" of the DAB band will be performed, otherwise a "Quick scan" will be carried out the next time t
Summary of the content on the page No. 17
Setting the alarm time 1. Repeatedly press and release the Info button until the display shows Alarm Status. 2. Press the Select button the display will showAlarm Time Set. The minutes digits will begin to flash in the display. Set the required minute using the Tuning Up/Down buttons. 3. Press the Select button. The hours digits will begin to flash in the display. Set the required hour using theTuningUp/Downbuttons. GB 4. Press the Select button to confirm the alarm setting. The display will sho
Summary of the content on the page No. 18
Selecting alarm type Your clock radio can be set so as to wake you to either radio or beep type alarm. 1. Repeatedly press and release the Info button until the display shows Alarm Status. 2. Press either the Tuning Up or Down buttons to enter alarm type setting. 3. Press the Select button to change between Radio and Beep alarms. 4. Press the Info button to confirm the selection. Note: when alarm is set to wake by radio your clock radio switch on to the last used station. 17
Summary of the content on the page No. 19
Cancelling alarms 1. Whilst an alarm is sounding it can be cancelled for 24hours by pressing the Standby button. 2. To permanently cancel an alarm proceed as follows:- 3. Repeatedly press and release the Info button until the display shows Alarm Status. GB 4. Press the Select button to change alarm status to OFF. Snoozefunction 1. The radio or beep alarm can be silenced for 5 minutes by pressing the Tuning Up/Down or Select buttons. The display will show . 2. This sequence can be repeated during
Summary of the content on the page No. 20
Sleep timer The sleep timer can only be set when the power (Standby) is on. 1. Repeatedly press and release the Info button until the display shows Sleep Status. 2. Press the Select button to select Sleep On. 3. Select the required sleep time (1- 99 minutes) using the TuningUp or Down buttons. 4. Press the Select button to confirm the sleep timer setting. 5. The display will show sleep time before returning to normal radio display. The radio will switch off after the sleep time has elapsed. 19
