Summary of the content on the page No. 1
OM-1102 113 214A
July 1995
Processes
Multiprocess Welding
Description
Semiautomatic Welding Platform
Swingpak 12 & 16
Visit our website at
www.MillerWelds.com
Summary of the content on the page No. 2
From Miller to You Thank you and congratulations on choosing Miller. Now you can get the job done and get it done right. We know you don’t have time to do it any other way. That’s why when Niels Miller first started building arc welders in 1929, he made sure his products offered long-lasting value and superior quality. Like you, his customers couldn’t afford anything less. Miller products had to be more than the best they could be. They had to be the best you could buy. Today, the people that bu
Summary of the content on the page No. 3
TABLE OF CONTENTS SECTION 1 – SAFETY PRECAUTIONS AND SIGNAL WORDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1-1. General Information And Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1-2. Safety Alert Symbol And Signal Words . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 SECTION 2 – SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 4
Summary of the content on the page No. 5
SECTION 1 – SAFETY PRECAUTIONS AND SIGNAL WORDS 1-1. GENERAL INFORMATION AND SAFETY 1-2. SAFETY ALERT SYMBOL AND SIGNAL WORDS A. General The following safety alert symbol and signal words are used throughout this manual to call attention to and identify different levels of hazard and special instruc- Information presented in this manual and on various la- tions. bels, tags, and plates on the unit pertains to equipment design, installation, operation, maintenance, and This safety alert symbol is
Summary of the content on the page No. 6
2-1. DESCRIPTION Additional space is available on the base for mounting customer supplied accessories. The SWINGPAK-12 and SWINGPAK-16 provide a di- Table 2-1. Specifications rect mounting facility for several welding power sources (refer to welding power source Owner’s Manual for base mounting hole layout), SWINGARC wire feeder or CB Weight boom, RADIATOR 1A or RADIATOR 2A coolant sys- Net Ship tem, MPG-395B resistance grid, AFT-100 flux tank, and shielding gas cylinder. If equipment other tha
Summary of the content on the page No. 7
IMPORTANT: If cooling system has mounting holes in WARNING: ELECTRIC SHOCK can kill. base, do not install mounting brackets onto SWINGPAK • Do not touch live electrical parts. locker. Instead, install coolant system directly onto lock- • Be sure input power is disconnected and er using supplied hardware. welding power source is shut down before making connections to disconnect switch. 7. If applicable, install grid onto SWINGPAK locker using supplied 1/4-20 x 1 inch cap screws (Item 7, Figure
Summary of the content on the page No. 8
SECTION 4 – PARTS LIST Hardware is common and not available unless listed. OM-1102 Page 4 SWINGARC Digital Wire Feeder MPG-395B Resistance Grid RADIATOR 1 Or RADIATOR 2 Coolant System 1 7 Disconnect Switch Mounting Brackets Gas 6 Cylinder Disconnect Switch 2 7 3 4 6 5 8 Coolant System Mounting Bracket Boom Support Base 9 10 23 SWINGPAK AFT-100 Cylinder Locker Flux Tank 22 Support Bracket 21 11 6 7 12 13 14 16 15 Gas Bottle Support Bracket 20 19 17 SWINGPAK SD-113 627-A 18 Base Figure 4-1. Comp
Summary of the content on the page No. 9
Quantity Model Item Part Description No. No. 12 16 Figure 4-1. Complete Assembly . . 1 . . . 086 752 . . BRACKET, mtg disconnect switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 . . . 2 . . 2 . . . 086 739 . . CLAMP, mtg disconnect switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 . . . 2 . . 3 . . . 010 910 . . WASHER, flat SAE .375 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 10
Notes
Summary of the content on the page No. 11
Effective January 1, 2000 (Equipment with a serial number preface of “LA” or newer) This limited warranty supersedes all previous Miller warranties and is exclusive with no other Warranty Questions? guarantees or warranties expressed or implied. LIMITED WARRANTY – Subject to the terms and conditions Call * APT, ZIPCUT & PLAZCUT Model Plasma Cutting below, Miller Electric Mfg. Co., Appleton, Wisconsin, warrants Torches 1-800-4-A-MILLER to its original retail purchaser that new Miller equipment
Summary of the content on the page No. 12
Owner’s Record Please complete and retain with your personal records. Model Name Serial/Style Number Purchase Date (Date which equipment was delivered to original customer.) Distributor Address City State Zip For Service Call 1-800-4-A-Miller or see our website at www.MillerWelds.com to locate a DISTRIBUTOR or SERVICE AGENCY near you. Always provide Model Name and Serial/Style Number. Contact your Distributor for: Welding Supplies and Consumables Options and Accessories Personal Safety Equipment
