Life Fitness Utility Bench user manual

Summary of the content on the page No. 1

Signature
Utility Bench
Owners Manual

Summary of the content on the page No. 2

Signature Utility Bench Safety & Warranty It is the sole responsibility of the purchaser of LIFE FITNESS products to read the owner's manual, warning labels and instruct all individuals, whether they are the end user or supervising personnel on proper usage of the equipment. It is recommended that all users of LIFE FITNESS exercise equipment be informed of the following information prior to its use. LIFE FITNESS recommends that all commercial fitness equipment be used in a supervised area. It

Summary of the content on the page No. 3

FOUND ON THE FRAME FOUND AT MOVING PARTS

Summary of the content on the page No. 4

Signature Utility Bench Safety & Warranty WARRANTY WHAT IS COVERED This Life Fitness commercial exercise equipment (Signature Benches and Racks) is warranted to be free of all defects in material and workmanship to the original purchaser for the specific items and duration listed: 10 years on structural frame 1 year on bearings 1 year on grips 1 year on cables and belts (if so equipped) 1 year for rust or corrosion of structural frame. Scratches or scrapes where the subsurface of the unit has b

Summary of the content on the page No. 5

HOW TO GET PARTS & SERVICE Simply call Customer Support Services at (800) 351-3737 or (847) 451-0036, Monday through Friday from 8:00 a.m. to 6:00 p.m. Central Standard Time, and tell them your name, address and the serial number of your Product. They will tell you how to get a replacement part, or, if necessary, arrange for service where your Product is located or advise you on how and where to ship the Product for service. Before shipping: 1. Obtain a Return Authorization Number (RA#) from C

Summary of the content on the page No. 6

Signature Utility Bench Assembly Instructions Item Qty Description Part Number 1 1 Seat Frame 78414XX 2 1 Base Frame 78411XX 3 2 M10 x 25mm Bolt 3256202 4 8 3/8” Flat Washer 3102514 5 2 M10 Nylock Nut 3242002 6 1 Seat Pad 7813801 7 4 M10 x 35mm Bolt 3256204 8 1 Back Pad 7468901 9 6 1” Hole Plug 3237403 Tools Required: 17mm Wrench Metric Allen Wrench Set Ratchet with 17mm Socket Rubber Mallet Ratchet Extension

Summary of the content on the page No. 7

1. Assemble the SEAT FRAME (1) to the BASE FRAME (2) using two M10 X 25mm BOLTS (3), four 3/8" SAE WASHERS (4) and two M10 NYLOCK NUTS (5) as shown. Tighten the BOLTS and NUTS securely. 2. Assemble the SEAT PAD (6) to the SEAT FRAME (1) using two M10 X 35mm BOLTS (7) and two 3/8" SAE WASHERS (4). Tighten the BOLTS securely. 3. Assemble the BACK PAD (8) to the SEAT FRAME (1) as shown using two M10 X 35mm BOLTS (7) and two 3/8" SAE WASHERS (4). Tighten the BOLTS securely. 4. Install 1” HOLE PLUGS

Summary of the content on the page No. 8

Signature Utility Bench © 2006 Life Fitness, a division of Brunswick Corporation. All rights reserved. Life Fitness is a registered trademark of Brunswick Corporation. SUB 8.18.06 8122301 RevA-1