Life Fitness SBBR user manual

Summary of the content on the page No. 1

Signature Barbell Rack
Owners Manual

Summary of the content on the page No. 2

Signature Barbell Rack Safety & Warranty It is the sole responsibility of the purchaser of LIFE FITNESS products to read the owner's manual, warning labels and instruct all individuals, whether they are the end user or supervising personnel on proper usage of the equipment. It is recommended that all users of LIFE FITNESS exercise equipment be informed of the following information prior to its use. LIFE FITNESS recommends that all commercial fitness equipment be used in a supervised area. It i

Summary of the content on the page No. 3

FOUND ON THE FRAME FOUND AT MOVING PARTS

Summary of the content on the page No. 4

Signature Barbell Rack Safety & Warranty WARRANTY WHAT IS COVERED This Life Fitness commercial exercise equipment (Signature Benches and Racks) is warranted to be free of all defects in material and workmanship to the original purchaser for the specific items and duration listed: 10 years on structural frame 1 year on bearings 1 year on grips 1 year on cables and belts (if so equipped) 1 year for rust or corrosion of structural frame. Scratches or scrapes where the subsurface of the unit has be

Summary of the content on the page No. 5

HOW TO GET PARTS & SERVICE Simply call Customer Support Services at (800) 351-3737 or (847) 451-0036, Monday through Friday from 8:00 a.m. to 6:00 p.m. Central Standard Time, and tell them your name, address and the serial number of your Product. They will tell you how to get a replacement part, or, if necessary, arrange for service where your Product is located or advise you on how and where to ship the Product for service. Before shipping: 1. Obtain a Return Authorization Number (RA#) from C

Summary of the content on the page No. 6

Signature Barbell Rack Assembly Instructions Item Qty Description Part Number 1 1 Top Cross Member 81431XX 2 2 Upright Frame 81435XX 3 4 M10 X 65mm Screw 3256210 4 16 3/8" SAE Washer 3102514 5 8 M10 Nylock Nut 3242002 6 1 Bottom Cross Member 79395XX 7 4 M10 X 140mm Screw 3256222 Tools Required: 17mm Wrench Metric Allen Wrench Set Ratchet with 17mm Socket Rubber Mallet Ratchet Extension

Summary of the content on the page No. 7

1. LOOSELY assemble the TOP CROSS MEMBER (1) onto the two UPRIGHT FRAMES (2) using four M10 X 70mm SCREWS (3), eight 3/8" SAE WASH- ERS (4), and four M10 NYLOCK NUTS (5) as shown. 2. Assemble the BOTTOM CROSS MEMBER (6) onto the two UPRIGHT FRAMES (2) using four M10 X 140 SCREWS (7), eight 3/8" SAE WASH- ERS (4) and four M10 NYLOCK NUTS (5) as shown. 3. Tighten all SCREWS and NUTS securely.

Summary of the content on the page No. 8

Signature Barbell Rack © 2006 Life Fitness, a division of Brunswick Corporation. All rights reserved. Life Fitness is a registered trademark of Brunswick Corporation. SBBR 9.22.06 8183701 RevA-1