Summary of the content on the page No. 1
-
G 0s
Master Clock Generator
Owner’s Manual
Summary of the content on the page No. 2
Summary of the content on the page No. 3
Contents Before Use Thank you for choosing TEAC. Read this manual carefully Read this before operation to get the best performance from this unit. < As the unit may become warm during operation, always leave sufficient space around the unit for ventilation. IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . 2 < The voltage supplied to the unit should match the voltage as Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 printed on
Summary of the content on the page No. 4
Features Up to 192 kHz Word Sync clock production Super-rigid Chassis to Ensure Uncompromised Sound Quality With the advent of digital equipment using higher sampling frequencies than ever, 176.4 kHz and 192 kHz word clocks A rigid chassis featuring a total weight of 18 kg (40 pounds) (sync signals) are made available in addition to conventional helps to provide a stabilized platform for the clock operation. 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz clocks. As an additional plus, the output circuit
Summary of the content on the page No. 5
Names of Each Control A B C D E A D STANDBY/ON button FREQUENCY MODE button When the Main Power switch on the rear panel is ON, use Use this to select the fundamental frequency of the word this button to turn the unit on or to standby. When the unit clock. is on, the indicator lights. 44.1kHz: This is generally used for red-book CD players which operate with a 44.1kHz clock standard. B MASTER button Press this button to select the signal source you will use for 48kHz: the reference frequency.
Summary of the content on the page No. 6
Summary of the content on the page No. 7
A WORD CLOCK OUT terminals These terminals output precise word synchronization signals. Connect these OUT terminals to the WORD SYNC IN terminals of the other digital equipment, using a commercially available BNC coaxial cable. < For other connections, read the instructions of each component you intend to use with this unit. < Each of the A, B, and C channels is switch-selectable between 1xFs, 2xFs, and 4xFs. So you can, for example, connect an 88.2 kHz and a 176.4 kHz machine to the single G-0
Summary of the content on the page No. 8
Set Up for Esoteric Units 4 Select 44.1kHz using the FREQUENCY MODE button. 2 3 4 5 5 Select the frequency of the word clock for each line by pressing the A, B or C button. This is the recommended set up for synchronization with TEAC-ESOTERIC CD units: P-70, X-01, UX-1, P-01, D-01 < Set the frequency as high as the connected units will allow for synchronization. 1 Connect WORD CLOCK OUT terminals to WORD SYNC IN terminals of each unit using commercially available BNC P-70: 88.2 kHz coaxial cabl
Summary of the content on the page No. 9
Set Up for DVD Players, Universal Players, etc. 5 If your units are connected to the WORD SYNC OUT terminals, select the frequency of the word clock for each line by pressing the A, B or C button. 2 3 6 4 5 < Set the frequency as high as the connected units will allow for synchronization. This is the recommended set up for synchronizing DVD players, D/A converters and other similar digital devices. 6 If your units are connected to the UNIVERSAL CLOCK 1 Connect WORD CLOCK OUT terminals to word
Summary of the content on the page No. 10
Dimmer Troubleshooting In case you experience any problem with this unit, please take the time to look through this chart and see if you can solve the problem yourself before you call your dealer or a TEAC service center. No power eCheck the connection to the AC power supply. Check and make sure the AC source is not a switched outlet and that, if it is, the switch is turned on. Make sure there is power to the AC outlet by plugging in another item such as a lamp or fan. e Turn on the POWER switch
Summary of the content on the page No. 11
Specifications Clock outputs General 44.1 kHz lines . . . . . . . . . . . . . 44.1 kHz, 88.2 kHz, 176.4 kHz Power supply . . . . . . . . . . . . . . . . . . . . . . . . AC 120 V, 60 Hz 48 kHz lines . . . . . . . . . . . . . . . . . . . 48 kHz, 96 kHz, 192 kHz PAL FILM lines. . . . . . . . . . 46.08 kHz, 92.1 6kHz, 184.32 kHz Power consumption . . . . . . 75 W (maximum), 31 W (nominal) UNIVERSAL CLOCK lines . . . . . . . . . . . . . . . . 100 kHz, 96 kHz Weight . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 12
Z TEAC CORPORATION 3-7-3, Nakacho, Musashino-shi, Tokyo 180-8550, Japan Phone: (0422) 52-5081 TEAC AMERICA, INC. 7733 Telegraph Road, Montebello, California 90640 Phone: (323) 726-0303 TEAC CANADA LTD. 5939 Wallace Street, Mississauga, Ontario L4Z 1Z8, Canada Phone: (905) 890-8008 TEAC MEXICO, S.A. De C.V Campesinos N°184, Colonia Granjas Esmeralda, Delegacion Iztapalapa, CP 09810, México DF Phone: (525) 581-5500 TEAC UK LIMITED 5 Marlin House, Croxley Business Park, Watford, Hertford
