Summary of the content on the page No. 1
COMPONENT
#840138-1HR
19.2V 2-SPEED BATTERY-OPERATED DRILL
INSTRUCTION MANUAL
THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY, OPERATION,
MAINTENANCE AND STORAGE OF THIS PRODUCT. BEFORE USE, READ CAREFULLY AND
UNDERSTAND ALL CAUTIONS, WARNINGS, INSTRUCTIONS AND PRODUCT LABELS. FAILURE TO DO
SO COULD RESULT IN SERIOUS PERSONAL INJURY AND/OR PROPERTY DAMAGE.
FOR CUSTOMER SERVICE
IF YOU SHOULD HAVE ANY QUESTIONS OR EXPERIENCE A PROBLEM WITH YOUR ALLTRADE
87-1904-60957
POUR LE SERVICE
Summary of the content on the page No. 2
SECTION FOUR TABLE OF CONTENTS MAINTENANCE AND CLEANING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 CONGRATULATIONS! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 INTENDED USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 3
WORK AREA DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. Keep your work area clean and well lit. Cluttered work benches and dark work WARNING indicates a potentially hazardous areas may cause accidents or injury. situation which, if not avoided, could result in death or serious injury. Do not operate power tools in explosive areas, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may
Summary of the content on the page No. 4
SERVICE Tool service must be performed only by qualified repair personnel. Service or Remove adjusting keys or wrenches before turning the tool “ON”. A wrench or a maintenance by unqualified personnel may result in a risk of injury. key that is left attached to a rotating part of the tool may result in personal injury. When servicing a tool, use only identical replacement parts. Follow instructions Do not overreach. Keep proper footing and balance at all times. Proper foot- in the Maintenance s
Summary of the content on the page No. 5
FUNCTIONAL DESCRIPTION 8 6 10 Do not use the Cordless Drill if it has been damaged, left outdoors in the 5 rain, snow, wet or damp environments, or immersed in liquid. Maintain labels and nameplates on the Cordless Drill. These carry important 12 information. If unreadable or missing, contact Alltrade for a replacement. SYMBOLS 7 3 9 IMPORTANT: Some of the following symbols may be used on your tool. Please 11 study them and learn their meaning. Proper interpretation of these symbols will allow y
Summary of the content on the page No. 6
BATTERY REMOVING/ATTACHING BATTERY PACK REMOVE BATTERY PACK: 1. Press both release buttons on either side of the Cordless Drill to release Before using battery pack, please read carefully all instruc- the battery pack. tions and cautionary markings on battery pack, battery charger and product using battery. 2. Pull battery pack free of Cordless Drill. ® Do not incinerate the battery pack even if it is severely dam- ATTACH BATTERY PACK: aged or is completely worn out. The battery pack can explod
Summary of the content on the page No. 7
CHARGING BATTERY PACK ASSEMBLY CHARGE BATTERY PACK: BATTERY PACK 1. Plug the charger into Be aware that this tool is always in an operating condition the nearest 120 volt because it does not have to be plugged into an electrical outlet. Always turn electrical outlet. the switch “OFF” and remove the battery pack before changing bits. 2. Make sure the trigger on the Cordless Drill INSTALLING DRILL BIT INTO KEYLESS CHUCK LED is in the “OFF” LIGHT position and remove WARNING the battery pack fr
Summary of the content on the page No. 8
CONTROL RING THE CONTROL RING ADJUSTS THE LEVEL OF TORQUE: VARIABLE SPEED TRIGGER SWITCH • For light duty work, use lower settings. • For heavy duty work, use higher settings. THIS TOOL IS CONTROLLED BY A TRIGGER SWITCH: PROPER SETTING FOR DRIVING SCREWS: • The speed of the Cordless Drill depends 1. Set the ring on the lowest on the amount of pressure you put on the setting to begin. trigger. TRIGGER 2. Try tightening the first screw. SWITCH • The more pressure you apply, the faster If the d
Summary of the content on the page No. 9
• Never try to start a stalled Drill by clicking the trigger switch “ON” and “OFF”. DRILLING METAL This may damage your tool. WHEN DRILLING HARD METALS: • To reduce jamming, always keep the Drill running when pulling the bit out of a • Apply a lubricant, such as cutting oil, to the tip of the bit. finished hole. • Start with a small hole then enlarge to the required size. Make sure the bit is SCREWDRIVING: actually cutting and not spinning in the hole as this will dull the edges of the bit. •
Summary of the content on the page No. 10
ACCESSORIES PROTECTING THE ENVIRONMENT Use only accessories that are recommended by the manufacturer for your model. BATTERIES Accessories that may be suitable for one tool may become hazardous when used on Alltrade batteries can be recharged many times. At the end of their useful life, another tool. recycle batteries with due care for our environment. Always attach grounded (3-prong) extension cords to grounded (3-hole) outlets. Ni-Cad and Ni-MH batteries are recyclable. Take them to your loc
Summary of the content on the page No. 11
to determine whether any item or part is nonconforming and, if so, whether the 3 YEAR LIMITED WARRANTY item and/or part will be repaired and/or replaced. If the unit is repaired, new or Express and Exclusive Limited Warranty to Original Retail Buyer reconditioned replacement parts may be used. If Alltrade chooses to replace Alltrade Tools LLC (hereinafter "Alltrade") expressly warrants to the original retail the product, it may replace it with a new or reconditioned one of the same or purchas
Summary of the content on the page No. 12
Warranty Disclaimers REPRESENTATIVE(S) HAS BEEN ADVISED OF THE POSSIBILITY OF ANY SUCH EXCLUSION AND DISCLAIMER OF ALL OTHER EXPRESS WARRANTIES, DAMAGES. IN NO EVENT, WHETHER AS A RESULT OF A BREACH OF CONTRACT, GUARANTIES AND/OR REPRESENTATIONS. EXCEPT FOR THE LIMITED WARRANTY WARRANTY, TORT (INCLUDING NEGLIGENCE) OR OTHERWISE, SHALL PROVIDED ABOVE, ALL OTHER EXPRESS WARRANTIES, GUARANTIES AND/OR ALLTRADE’S AND/OR ITS REPRESENTATIVE(S)’ LIABILITY EXCEED THE PRICE OF REPRESENTATIONS BY ALLTRADE
Summary of the content on the page No. 13
COMPONENT #840138-1HR 19.2V BATTERY-OPERATED WORKLIGHT INSTRUCTION MANUAL THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY, OPERATION, MAINTENANCE AND STORAGE OF THIS PRODUCT. BEFORE USE, READ CAREFULLY AND UNDERSTAND ALL CAUTIONS, WARNINGS, INSTRUCTIONS AND PRODUCT LABELS. FAILURE TO DO SO COULD RESULT IN SERIOUS PERSONAL INJURY AND/OR PROPERTY DAMAGE. FOR CUSTOMER SERVICE IF YOU SHOULD HAVE ANY QUESTIONS OR EXPERIENCE A PROBLEM WITH YOUR ALLTRADE POUR LE SERVICE APRÉS VENTE 87-1904-
Summary of the content on the page No. 14
TABLE OF CONTENTS CONGRATULATIONS! Thanks for choosing this product. At Alltrade, our aim is to provide you with quality CONGRATULATIONS! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 products at an affordable price, and we want you to be totally satisfied with your INTENDED USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 product and our Customer Service. If any help and advice is needed, please SECTION ONE
Summary of the content on the page No. 15
BATTERY TOOL USE AND CARE CAUTION indicates a potentially hazardous situation which, if not avoided, may result in Ensure the switch is in the off position before inserting battery pack. Inserting the minor or moderate injury. battery pack into power tools that have the switch on invites accidents. Recharge only with the charger specified by the manufacturer. A charger that is CAUTION used without the safety alert symbol suitable for one type of battery pack may create a risk of fire when used
Summary of the content on the page No. 16
SYMBOLS FUNCTIONAL DESCRIPTION IMPORTANT: Some of the following symbols may be used on your tool. Please 6 study them and learn their meaning. Proper interpretation of these symbols will 7 5 allow you to operate the tool better and safer. 3 SYMBOL NAME EXPLANATION V Volts Voltage (Potential) A Amperes Current 4 Hz Hertz Frequency (Cycles per Second) W Watt Power 2 Kg Kilograms Weight Alternating Current Type of Current Direct Current Type of Current Alternating or Direct Current Type of Current
Summary of the content on the page No. 17
BATTERY REMOVING / ATTACHING BATTERY PACK REMOVE BATTERY PACK: 1. Press both release buttons on either side of Before using battery pack, please read carefully all instructions the Cordless Worklight to release the battery pack. and cautionary markings on battery pack, battery charger and 2. Pull battery pack free of Cordless Worklight. product using battery. ® ATTACH BATTERY PACK: Do not incinerate the battery pack even if it is severely dam- 1. Align the raised portion of the battery pack ag
Summary of the content on the page No. 18
CHARGING BATTERY PACK OPERATING THE WORKLIGHT BATTERY PACK CHARGE BATTERY PACK: Parts of this Worklight heat up almost immediately when 1. Plug the charger into in use. To avoid burns, use caution when handling light bulb and metal reflector. the nearest 120 volt Never change a hot light bulb. Bulb must be cool to the touch before attempting electrical outlet. to remove or replace it. 2. Make sure the trigger on the Cordless Worklight LED is in the “OFF” position LIGHT OPERATING THE ON / OFF
Summary of the content on the page No. 19
Equipment service must be performed only by qualified repair personnel using authorized replacement parts. Service or maintenance by unqualified personnel For your convenience, a spare light bulb is included could result in considerable risk of personal injury. Use of unauthorized parts or inside the unit. Unscrew the rim and carefully remove it from the light failure to follow maintenance instructions may create a risk of electric shock or assembly. injury. 1. Remove the battery pack from the
Summary of the content on the page No. 20
other product and/or component thereof manufactured or distributed by Alltrade, PROTECTING THE ENVIRONMENT and does not apply to products and/or components thereof designed, manufactured BATTERIES and/or assembled by others, for which Alltrade makes no warranties whatsoever. Alltrade batteries can be recharged many times. At the end of their useful life, recy- THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON cle batteries with due care for our environment. THE FACE HEREOF. Ni-Cad
