Summary of the content on the page No. 1
Kambrook - Australia Kambrook - New Zealand
Building 2, Port Air Industrial Estate Private Bag 94411
1A Hale Street Botany, Manukau
Botany NSW 2019 Auckland 2163
Australia New Zealand
Customer Service Line 1300 139 798 Customer Service Line/
Customer Service Fax 1800 621 337 Spare Parts 0800 273 845
Customer Service Fax 0800 288 513
www.kambrook.com.au
www.kambrook.co.nz
Due to continual improvement in design or otherwise, the product you
purchase may differ slightly from the illustration in t
Summary of the content on the page No. 2
Dome Kettle Instruction Booklet For all KSK76 models
Summary of the content on the page No. 3
Important Please retain your instruction book for future use. In the event that you need some assistance with your Kambrook appliance, please contact our Customer Service Department on 1300 139 798 (Australia) or 0800 273 845 (New Zealand). Alternatively, visit us on our website at www.kambrook.com.au or www.kambrook.co.nz
Summary of the content on the page No. 4
Contents Kambrook Recommends p4 Safety First Your Kambrook Dome Kettle p6 Using Your Dome Kettle p7 Care, Cleaning and Storage p9
Summary of the content on the page No. 5
Kambrook Recommends Safety First IMPORTANT: Please retain your instruction book for future use. At Kambrook, we believe that safe performance is the first priority in any consumer product, so that you, our valued customer can confidently use and trust our products. We ask that any electrical appliance that you use be operated in a sensible fashion with due care and attention placed on the following important operating instructions. Important Safeguards For Your Kambrook Dome Kettle • Car
Summary of the content on the page No. 6
• Do not remove the Kettle from the power base during operation. Ensure the WARNING: Do not Kettle has switched off after the water operate the kettle on an has boiled or reached the selected inclined surface. Do not temperature, before removing the Kettle move the kettle while it is from the power base. switched on. • Do not move the Kettle while it is switched on. • Do not overfill the Kettle past the ‘MAX’ WARNING: Do not mark which is indicated inside the Kettle. If the Kettl
Summary of the content on the page No. 7
Your Kambrook Dome Kettle 1. 1.7L capacity cordfree kettle 7. Easy-pull locking lid for easy filling and cleaning 2. 2200 watt concealed element 3. Multi-directional power base Not Shown 4. Cool-touch handle • Removable stainless steel filter 5. Large easy-pour spout • Cord storage 6. On/Off switch with power • Safety auto cut-off and boil “ON” indicator light dry protection 2 KSK76W shown 6
Summary of the content on the page No. 8
Using Your Dome Kettle 3. Place the kettle firmly onto Before First Use the power base and plug the Remove any packaging material and power cord into a 230V or promotional labels before using your 240V power outlet. kettle for the first time. 4. Press the ON/OFF switch to It is recommended before the first use the‘ON’ position. The power ‘ON’ to fill the kettle to the maximum level light will illuminate. with cold tap water, bring to the boil 5. The kettle will automatically switch
Summary of the content on the page No. 9
Using Your Dome Kettle continued Boil Dry Protection NOTE: Do not remove the kettle This kettle is fitted with a safety device, from the power base during which protects against overheating operation. Ensure the kettle has should your appliance be operated switched to the ‘OFF’ position with insufficient water. If this occurs after the water has boiled before the kettle will stop heating and removing the kettle from the automatically switch “OFF”. power base. Should this occur, switch
Summary of the content on the page No. 10
care, cleaning and Storage Always switch appliance OFF, then switch off at the power outlet and NOTE: Ensure the kettle and then unplug before cleaning water have cooled down before the appliance. attempting to clean the filter. Mineral Deposits and WARNING: Never Discolouration immerse the kettle base, switch area, power base Due to the large surface area of the or power supply cord in concealed element interior base, water or allow moisture discolouration due to mineral deposits wil
Summary of the content on the page No. 11
Notes 10
Summary of the content on the page No. 12
Notes 11
