Summary of the content on the page No. 1
NOTE:
Please read all instructions
carefully before using this
product
Safety Notice
IGS-05
Hardware Identifier
BICEP/TRICEP BENCH
Assembly Instruction
Parts List
Warranty
Ordering Parts
Model
IGS-05
Retain This
Manual for
Reference
02-27-02
OWNER'S
IMPEX FITNESS PRODUCTS
MANUAL
14777 DON JULIAN RD., CITY OF INDUSTRY, CA 91746
Tel: (800) 999-8899 Fax: (626) 961-9966
www.impex-fitness.com
info@impex-fitness.com
Summary of the content on the page No. 2
TABLE OF CONTENTS BEFORE YOU BEGIN...................................................................................... 1 IMPORTANT SAFETY NOTICES..................................................................... 2 HARDWARE IDENTIFIER.....…....................................................................... 3 ASSEMBLY INSTRUCTIONS........................................................................... 4 EXPLODED DIAGRAM……………………………………………………………... 8 PARTS LIST…………………………
Summary of the content on the page No. 3
IMPORTANT SAFETY NOTICE PRECAUTIONS This exercise machine is built for optimum safety. However, certain precautions apply whenever you operate a piece of exercise equipment. Be sure to read the entire manual before you assemble or operate your machine. In particular, note the following safety precautions: 1. Keep children and pets away from the machine at all times. DO NOT leave children unattended in the same room with the machine. 2. Only one perso
Summary of the content on the page No. 4
3
Summary of the content on the page No. 5
ASSEMBLY INSTRUCTION Tools Required Assembling the Machine: Adjustable Wrench, Allen Wrench and Hammer NOTE: It is strongly recommended this machine to be assembled by two or more people to avoid possible injury. STEP 1 (See Diagram 1) A.) Attach the Stabilizer Frame (#3) to the Main Frame (#2). Secure it with two M10 x 3 ½” Carriage Bolts (#47), ∅ ¾” Washers (#32) and M10 Aircraft Nuts (#31). DIAGRAM 1 4
Summary of the content on the page No. 6
STEP 2 (See Diagram 2) A.) Attach a U-Shaped Bracket (#35) to the Main Frame (#2). Secure it with a M10 x 2 ¾” Allen Bolt (#36), two ∅3/4” Washers (#32), and one M10 Aircraft Nut (#31). B.) Attach the bottom of the Support Frame (#1) to the Stabilizer Frame (#3). Secure it with two M10 x 2 ¾” Carriage Bolts (#48), ∅ ¾” Washers (#32), and M10 Aircraft Nuts (#31). C.) Attach the upper portion of the Support Frame (#1) to the U-Shaped Bracket on the Main Frame (#2). Secure it wit
Summary of the content on the page No. 7
STEP 3 (See Diagram 3) A.) Slide one ∅1 ½” Plastic Spacer (#45) onto the pivot axle on the Adjustment Plate (#23). Insert the axle through the barrel on the Support Frame (#2). Slide another Spacer (#45) onto the axle. B.) Attach the Weight Holder (#6) onto the axle. Align the holes and insert a Roll Pin (#22) into the hole. Drive the Pin into the hole with a hammer. C.) Attach the Swing Frame (#5) onto the axle on the Adjustment Plate (#23) from the other side. Secure it w
Summary of the content on the page No. 8
STEP 4 (See Diagram 4) A.) Attach the Seat Pad (#9) to the Seat Adjustment Frame (#7). Secure it with two M8 x 1 3/8” Allen Bolts (#39) and ∅ 5/8” Washers (#44). B.) Insert the Seat Adjustment Frame into the opening on the Main Frame. Insert the Lock Knob (#37) to secure the Seat. C.) Attach the Arm Pad (#10) to the Main Frame (#2). Secure it with two M8 x 1 3/8” Allen Bolts (#39) and ∅ 5/8” Washers (#44). Please note there are three sets of holes to select from. DIAGRAM 4 7
Summary of the content on the page No. 9
8
Summary of the content on the page No. 10
PARTS LIST KEY NO. DESCRIPTION Q’ty 1 Support Frame 1 2 Main Frame 1 3 Stabilizer Frame 1 4 Handle 1 5 Swing Frame 1 6 Weight Holder 1 7 Seat Adjustment Frame 1 8 Rubber Bumper 1 9 Seat Pad 1 10 Arm Pad 1 11 Spring 1 12 Selector 1 13 Bushing 1 14 Bearing 4 15 ∅ 2 1/8” Washer 1 16 M10 x ¾” Allen Bolt 2 17 Spring Clip Sleeve 2 18 Spring Clip 1 19 Olympic Sleeve End Cap 1 20 Olympic Sleeve 1 21 M8 Screw 1 22 Roll Pin 1 23 Adjustment Plate 1 24 1 ¾” End Cap 1 25 2
Summary of the content on the page No. 11
IRON GRIP SPORT By IMPEX FITNESS PRODUCTS LIMITED LIFE TIME WARRANTY IMPEX FITNESS PRODUCTS ("IMPEX") warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of LIFE TIME on the Frame and Weld, 3 YEARS on parts, and 6 MONTHS on upholstery from the date of purchase. This warranty extends only to the original purchaser. IMPEX's obligation under this Warranty is limited to replacing or repairing, at IMPEX's opti
