Summary of the content on the page No. 1
USER'S MANUAL
AW07P2 Series
AW09P2 Series
AW12P2 Series
Window-type Room Air Conditioner (Cooling)
E DB98-7 04A
DB98-27204A.indd 15 2007-1-23 9:18:46
Summary of the content on the page No. 2
Register your product at www.samsung.com/global/register Safety Precautions The following safety precautions must be taken when using your air conditioner. Risk of electric shock. • Can cause injury or death. • Disconnect all WARNING remote electric power supplies before servicing, installing or cleaning. • This must be done by the manufacturer or its service agent or a similar qualified person in order to avoid a hazard. u Users of this product are cautioned not to attempt repair of this p
Summary of the content on the page No. 3
Contents PREPARING YOUR AIR CONDITIONER n Safety Precautions ........................................................................................ n Air Conditioning Unit-Main Parts and Control Panel ..................................... 4 OPERATION YOUR AIR CONDITIONER n Cooling Your Room ....................................................................................... 5 n Airing Your Room ...............................................................................
Summary of the content on the page No. 4
Air Conditioning Unit - Main Parts and Control Panel The design and shape are subject to change according to the model. Air Outlet Inner air flow blades (right/left orientation) Air inlet (Inside) Outer air flow blades (up/down orientation) The air filter is located in side Air inlet (Outside) Ventilation lever Power Cable The type of the power plug may differ according to the Power plug type of local power supply. Operating mode Temperature selection dial control dial Air flow blade Fan
Summary of the content on the page No. 5
Cooling Your Room You must select the Cool mode if you wish to lower the temperature in your room.You can also set the fan speed. To switch the unit on,simply turn the Timer dial to "Continue" position. The air conditioner starts operating. Result: To adjust the temperature, turn the temperature control dial to the desired position. Possible temperatures: Between 8 °C and 9 °C inclusive. Result: The air conditioner starts cooling if the room temperature is higher than the s
Summary of the content on the page No. 6
Airing Your Room If the atmosphere in your room is stale, you can air it using the Fan feature and if necessary, evacuate the stale air outside. If you wish to evacuate stale air outside, push the ventilation lever on the front of the unit to the right and the open position ( ). Result: The air inside the room circulates and stale air is evacuated outside. Otherwise, push the ventilation lever to the left and the closed position ( ). Result: The air simply circulates inside the room. T
Summary of the content on the page No. 7
Setting the Off Timer The Off Timer enables you to switch off the air conditioner automatically after a given period of time. You can set the period of time from 0 hour to12 hours. You can set the Off Time at any time. To set the off time, simply turn the Timer dial to the time you want. Possible time is lower hours inclusive. To cancel the Off Timer function,That is to say,make the unit run incessantly, you can turn the timer dial to "Continue" position. Result: The air co
Summary of the content on the page No. 8
Adjusting the Air Flow Direction Vertically Again depending on the position of the unit in your room, you can adjust the orientation of the outer air flow blades on the right-hand side of the unit. RECOMMENDATION When... Adjust the blades to face... Cooling Upwards. Adjust the air flow blades to the desired position, by pushing them upwards or downwards. If you orient the air flow blades downwards and the unit operates in Cool mode for long periods of time, dew may: From
Summary of the content on the page No. 9
Cleaning Your Air Conditioner Be sure to clean the air filter periodically to maintain the air conditioner in the best condition for a long period of time. When cleaning the air conditioner, turn it off and pull out IMPORTANT the power plug. Hold the front grille handle, slightly pull it to the left side and open the front grille. The removal of the front grille makes it easier to clean the air conditioner. Open the grill
Summary of the content on the page No. 10
Solving Common Problems Before contacting the after-sales service,perform the following simple checks. They may save you the time and expense of an unnecessary service call. Problem Explanation/Solution The air conditioner does not Check that the circuit breaker used for the air conditioner has not operate at all been triggered. Check that the power cable is plugged into a wall socket and the socket is switched on, if necessary. Check that the correct operating mode has been selected (cool
Summary of the content on the page No. 11
Installation Before installation, be sure to check the installation area or the air conditioner, and drain hose. Checkpoints prior to installation Check the cabinet and front grille of the unit for any harmful defects such as scratches. Be sure to check the power supply. - Refer to the specifications on the label attached to the unit. Installation Conditions As the unit is heavy, the wall or window of the installation area should have sufficient strength and durability for operation of the
Summary of the content on the page No. 12
Installation(Cont.) Installation of the Drain Tube Fix the drain tube as shown in the figure. Rear Rubber cap Gasket Drain Tube Screws(EA) E- DB98-27204A.indd 12 2007-1-23 9:18:44
Summary of the content on the page No. 13
Memo E-3 DB98-27204A.indd 13 2007-1-23 9:18:44
Summary of the content on the page No. 14
DB98-27204A.indd 14 2007-1-23 9:18:45
