Summary of the content on the page No. 1
MODEL G0759
MILL/DRILL
w/STAND & DRO
MANUAL INSERT
The Model G0759 is the same machine as the Model G0704 except the Model G0759 has a 3-axis DRO.
Besides the differences noted in this insert, all other content in the Model G0704 owner's manual applies
to this machine. Before operating your new machine, you MUST read and understand this insert, the entire
Model G0704 manual, and the DRO manual to reduce the risk of injury when using this machine.
If you have any further questions about this m
Summary of the content on the page No. 2
MACHINE DATA SHEET Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901 MODEL G0759 MILL/DRILL WITH STAND AND DRO Product Dimensions: Weight.............................................................................................................................................................. 280 lbs. Width (side-to-side) x Depth (front-to-back) x Height........................................................................... 38 x 24 x 31 in. Footprin
Summary of the content on the page No. 3
Main Specifications: Operation Info Spindle Travel.............................................................................................................................................. 2 in. Max Distance Spindle to Column.......................................................................................................... 7-1/2 in. Max Distance Spindle to Table................................................................................................................. 13 in. Lon
Summary of the content on the page No. 4
Column & Stand 31 16 31-1 13 3 2 1 32 35 39 37 25 36 4 3 33 34 26 38 5 27 40 14 15 6 17 7 47 41 28 46 8 45 36 9 44 18 44 10 19 29 11 12 412 20 43 48 42 21 49 30 22 412-1 24 23 19 412-2 51 50 52 19 412-3 58 19 39 7 77 59 54 412-4 60 55 44 57 64 66 65 56 67 100 68 61 69 73 14 15 100-1 63 72 62 100-2 76 60 16 70 75 16 59 71 44 39 58 74 57 60 51 100-3 40 Please Note: We do our best to stock replacement parts whenever possible, but we cannot guarantee that all parts shown here are available for purc
Summary of the content on the page No. 5
Column & Stand REF PART # DESCRIPTION REF PART # DESCRIPTION 1 P0759001 Z-AXIS SLIDE 43 P0759043 Z-AXIS HANDWHEEL SHAFT 2 P0759002 SET SCREW M6-1 X 16 44 P0759044 KEY 4 X 4 X 12 3 P0759003 FLAT WASHER 8MM 45 P0759045 PILLOW BLOCK 4 P0759004 LOCK WASHER 8MM 46 P0759046 SPACER 5 P0759005 CAP SCREW M8-1.25 X 25 47 P0759047 PINION GEAR 6 P0759006 FLAT WASHER 12MM 48 P0759048 COLUMN 7 P0759007 LOCK WASHER 12MM 49 P0759049 Z-AXIS SCALE 8 P0759008 CAP SCREW M12-1.75 X 40 50 P0759050 THREADED SLEEVE M6-
Summary of the content on the page No. 6
Electrical Box 92 93 94 90 91 94 78 96 91 80 86 91 87 81 86 88 80-1 83 89 85 84 79 95 REF PART # DESCRIPTION REF PART # DESCRIPTION 78 P0759078 CIRCUIT BOARD JD-014 5WR02J 88 P0759088 ELECTRICAL BOX 79 P0759079 POTENTIOMETER W/ KNOB WX14-12 89 P0759089 CAP SCREW M5-.8 X 8 80 P0759080 CAP SCREW M3-.5 X 16 90 P0759090 ELECTRICAL BOX REAR COVER 80-1 P0759080-1 HEX NUT M3-.5 91 P0759091 FUSE HOLDER 81 P0759081 CIRCUIT BOARD CESX 1101-28 92 P0759092 FUSE 15A 250V FAST-ACTING, GLASS 83 P0759083 ON/OFF
Summary of the content on the page No. 7
Headstock 206-2 208 220 206-1 221-2 209 209-2 201 221-1 209-1 202 219 210 203 221 211 231 222 230 212 223 204 224 225-2 229 225-1 205 225 228 227 215 213 206 214 226 239 211 240 216 217 218 207 210 234-1 238 234-2 275 274 272 240 271 266 234 236 270 269 273 265 268 237 264 263 235 267 242 233 252 262 261 276 232 260 254 241 251 259 243 248 245 276 244 247 293 243 258 250 246-2 249 257 246-1 292 256 295 255 296 294 246 255-1 406 407 401 408 402 410 411 403 404 409 405 -7- Model G0759 (Mfd. Since
Summary of the content on the page No. 8
Headstock REF PART # DESCRIPTION REF PART # DESCRIPTION 201 P0759201 QUILL RETAINING CLIP 243 P0759243 HANDWHEEL CURVED PLATE SPRING 202 P0759202 BUSHING 244 P0759244 FINE DOWNFEED GRADUATED DIAL 203 P0759203 COMPRESSION SPRING 245 P0759245 WORM SHAFT 204 P0759204 EXT RETAINING RING 45MM 246-1 P0759246-1 DRAWBAR 7/16-20 x 9-11/16 205 P0759205 BALL BEARING 6209ZZ 246-2 P0759246-2 DRAWBAR RETAINER CAP 206 P0759206 COMBO GEAR 60/70T 246 P0759246 SPINDLE R8 206-1 P0759206-1 SPINDLE RING 16MM 247 P07
Summary of the content on the page No. 9
Chip Guard 280 281 279 278 277 282 283 284 297 285 286 287 289 288 REF PART # DESCRIPTION REF PART # DESCRIPTION 277 P0759277 FLAT WASHER 3MM 284 P0759284 LIMIT SWITCH DATER KW1-103 278 P0759278 HEX NUT M3-.5 285 P0759285 PROTECTIVE PAPER 279 P0759279 CAP SCREW M4-.7 X 20 286 P0759286 SET SCREW M5-.8 X 10 280 P0759280 EXT RETAINING RING 12MM 287 P0759287 CHIP GUARD POST 281 P0759281 WAVY WASHER 20MM 288 P0759288 CHIP GUARD 282 P0759282 GUARD MOUNTING BLOCK 289 P0759289 CAP SCREW M4-.7 X 18 283 P
Summary of the content on the page No. 10
Labels 302 301 303 312 309 310 308 304 305 307 306 311 REF PART # DESCRIPTION REF PART # DESCRIPTION 301 P0759301 READ MANUAL LABEL 307 P0759307 GRIZZLY GREEN TOUCH-UP PAINT 302 P0759302 SAFETY GLASSES LABEL 308 P0759308 CUTTER WARNING LABEL 303 P0759303 MACHINE ID LABEL 309 P0759309 ENTANGLEMENT LABEL 304 P0759304 HIGH/LOW SPEED LABEL 310 P0759310 AVOID OVERHEATING LABEL 305 P0759305 GRIZZLY PUTTY TOUCH-UP PAINT 311 P0759311 GRIZZLY.COM LABEL 306 P0759306 MODEL NUMBER LABEL 312 P0759312 ELECTRI
Summary of the content on the page No. 11
MODEL G0704 MILL/DRILL WITH STAND OWNER'S MANuAL Copyright © February, 2010 by g r izzly in dustrial, in C. r evised February, 2013 ( tr ) WARNING: NO pORTION Of THIS MANuAL MAy b E REpRODuc ED IN ANy SHApE OR f ORM WITHOuT THE WRITTEN AppROvAL Of G RIzzLy INDuSTRIAL, INc . (For models manu FaCtured sin Ce 08/11) #Jb12468 printed in C h ina
Summary of the content on the page No. 12
This manual provides critical safety instructions on the proper setup, operation, maintenance, and service of this machine/tool. Save this document, refer to it often, and use it to instruct other operators. Failure to read, understand and follow the instructions in this manual may result in fire or serious personal injury—including amputation, electrocution, or death. The owner of this machine/tool is solely responsible for its safe use. This responsibility includes but is not limited to
Summary of the content on the page No. 13
Table of c ontents INTRODuc TION ............................................... 2 SEc TION 6: MAINTENANc E ......................... 36 manual accuracy ........................................... 2 s chedule ...................................................... 36 Contact info.................................................... 2 l ubrication ................................................... 36 machine d escription ...................................... 2 SEc TION 7: SERvIc E ...............
Summary of the content on the page No. 14
INTRODuc TION Manual Accuracy c ontact Info We are proud to offer this manual with your new We stand behind our machines. If you have machine! We've made every effort to be exact any questions or need help, use the information with the instructions, specifications, drawings, below to contact us. Before contacting, please get and photographs of the machine we used when the serial number and manufacture date of your writing this manual. However, sometimes we still machine. This will help us h
Summary of the content on the page No. 15
Identification b a C y X d W e d v F u t s g r h Q h p i K i J o K l m n f igure 1. g 0704 identification. N. s torage access d oor A. d rawbar Cap and d rawbar O. Cross (y -axis) h andwheel b. v ertical (z-axis) h andwheel p. l ongitudinal s cale c . s peed r ange s elector Knob Q. d rill Chuck D. v ertical t ravel l ock R. h eadstock t ilt s cale E. Fine Feed l ock Knob S. Chip g uard f . Quill Feed l ever T. Quill l ock l ever G. t able u. Fine Feed Knob H. l ongitudinal (X-axis) h andwheel
Summary of the content on the page No. 16
Electronic c ontrols Identification a b K J h C i g F d e f igure 2. g 0704 electronic controls identification. G. in /mm u nit s election button A. s pindle rpm r eadout H. s pindle d epth d isplay b. s pindle d igital r eadout o FF button I. s pindle d irection s election Knob c . d igital r eadout on /zero button J. v ariable s pindle s peed Knob D. d igital r eadout battery Cover & battery K. start /emergency stop buttons E. s pindle d epth d isplay de Crease button f . s pindle d epth d i
Summary of the content on the page No. 17
MACHINE DATA SHEET Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901 MODEL G0704 DRILL/MILL WITH STAND Product Dimensions: Weight.............................................................................................................................................................. 265 lbs. Width (side-to-side) x Depth (front-to-back) x Height........................................................................... 38 x 24 x 31 in. Footprint (Lengt
Summary of the content on the page No. 18
Main Specifications: Operation Info Spindle Travel.............................................................................................................................................. 2 in. Max Distance Spindle to Column.......................................................................................................... 7-1/2 in. Max Distance Spindle to Table.................................................................................................................. 13 in. Lon
Summary of the content on the page No. 19
Accessories Included: Drill chuck 3–16mm with B16 taper Drill chuck arbor B16 x R8 Two T-bolts Two open-ended combo wrenches Chuck key Oil bottle Extra fuse Hex wrenches Standard and Phillips screwdrivers Tool box The information contained herein is deemed accurate as of 3/3/2014 and represents our most recent product specifications. Model G0704 PAGE 3 OF 3 Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. -7- Model G0704 (Mfg. Since
Summary of the content on the page No. 20
SEc TION 1: SAf ETy For Your Own Safety, Read Instruction Manual Before Operating This Machine The purpose of safety symbols is to attract your attention to possible hazardous conditions. This manual uses a series of symbols and signal words intended to convey the level of impor- tance of the safety messages. The progression of symbols is described below. Remember that safety messages by themselves do not eliminate danger and are not a substitute for proper accident prevention measures. Alwa
