Negri Electronics R 500T user manual

User manual for the device Negri Electronics R 500T

Device: Negri Electronics R 500T
Category: Chipper
Manufacturer: Negri Electronics
Size: 1.53 MB
Added : 8/5/2013
Number of pages: 23
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Negri Electronics R 500T. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Negri Electronics R 500T.

For your convenience

If looking through the Negri Electronics R 500T user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Negri Electronics R 500T on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Negri Electronics R 500T to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Negri Electronics R 500T User manual - Online PDF
Advertisement
« Page 1 of 23 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Negri Electronics R 500T but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Negri Electronics R 500T. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

Bio-shredders


Libretto istruzioni
Libretto istruzioni
Operator’s Manual
Operator’s Manual
Gebrauchsanweisung
Gebrauchsanweisung
Livret des Instructions
Livret des Instructions
Manual de Instruccion
Manual de Instruccion

“ R 500T “


Summary of the content on the page No. 2

La ditta NEGRI in qualunque momento si riserva il diritto di apportare alla propria produzione modifiche e miglioramenti ritenuti necessari a suo insindacabile giudizio. / NEGRI reserves the right to make any modifications and improvements to its products that it considers necessary at any time. / La Maison Negri se garde le droit de changer à n’importe quel moment les donnés, les poids et les mesures. / Negri tiene el derecho de cambiar datos, pesos y medidas en cualquier momento. / Die Firm

Summary of the content on the page No. 3

TABLE OF CONTENTS PAGE Introduction 4 Aim of the machine 4 Warnings and safety directions 4 Assem

Summary of the content on the page No. 4

INTRODUCTION This manual is to be considered part of the machine. Distributors of new and used machines are required to issue a document stating that the user ’s manual has been delivered along with the machine itself. Operators are strongly required to read the manual thoroughly and carefully before undertaking any kind of operation on the machine. AIM OF THE MACHINE The R500bio-shredder is a machine designed for professional uses. It is particularly suitable for the treatment

Summary of the content on the page No. 5

Before leaving the shredder unattended, it is necessary to stop the tractor and to disconnect the transmission shaft. It is compulsory to use the machine with all its safety devices correctly mounted to it. Roll the discharging conveyor belt completely open and turn it on before starting introducing the material. Never modify the machine. Do not use the machine for purposes, which are different than the ones it was designed for Safety measures during the shredding session When using

Summary of the content on the page No. 6

Before transporting the machine hooked to the tractor, please disconnect the transmission shaft. ASSEMBLY The R500 bio-shredder is delivered to you fully assembled and, therefore, ready to use. If you purchase an unassembled machine, please use the exploded diagram (picture 1), the basic components list and the corresponding instructions to carry out the assembly of the machine in the correct way. It is of the utmost importance that trained and authorized staff only sees to the as

Summary of the content on the page No. 7

Basic list of components 1 Mobile conveyor belt frame 9 m8 aut nut 2 Fixed conveyor belt frame 10 M8x10 dowel 3Gudgeon pin for conveyor belt frame 11 m8 collar 4 A4x50 split pin 12 hydraulic pipes 5 Cylinder 13 screw for the collar 6 Mobile pin for cylinder 14 rubber

Summary of the content on the page No. 8

Activation Please place the bio-shredder on a flat and dry surface. Let it hooked to the trailer. Make sure that all protection housings are closed. Make also sure that the levels of the hydraulic oil, of the oil in the multiplier unit and of the oil in the reducers (see paragraph “Maintenance”) are not under the allowed limit. Unblock the machine from its trailer by using the lever (picture 1). Turn the lever of 90° until it reaches its working position. Once the lever is in its wor

Summary of the content on the page No. 9

ADJUSTMENT OF THE MINIMUM NUMBER OF REVOLUTIONS Keeping the screen on, press the button “Clr” three times and the button “Min” one time. A number between 0 and 3500 will be displayed. The very number equals the current minimum number of revolutions when the device sets in to block the feeding roll. At this point, if you wish to increase or decrease this minimum number of revolutions, you simply have to press the buttons “max” or “min” according to your needs. Once you have chosen the m

Summary of the content on the page No. 10

It is not possible to calibrate the minimum number of revolutions so that it is equal or higher than the maximum number. The same goes the other way round. Use Unfold the conveyor belt open by using the outer lever of the distributor (picture 3, lever upwards to open it; lever downwards to close it). Turn the conveyor belt on by using the central lever (picture 4. Lever in the middle means that the conveyor is still; lever downward means that the conveyor belt is moving). Start the

Summary of the content on the page No. 11

THE BIOSHREDDER DOES NOT IDLE Please make sure that the cardan joint is connected directly to the tractor and to the shredder: the safety locks must be in their appropriate seatings. If the failure goes on, please call a technician. STALLING OF THE CUTTING HEADS BECAUSE OF TOO MUCH MATERIAL INSERTED OR FOLLOWING THE ACCIDENTAL INSERTION OF STONES OR BIG METAL PIECES (Use the exploded diagram and the list of components at the end of the manual) Switch off the engine and wear sa

Summary of the content on the page No. 12

could break because of overheating. Before re-starting the bio-shredder, please remove any branches stuck under the driving roller (54). In order for you to do so, please unhook the springs (48) and then lift the driving roller (54) Clean the cutting unit as described in the previous paragraph. STALLING OF THE INPUT HYDRAULIC SYSTEMS If the roller (54) and the apron conveyor (145) are stalled, make sure that you did not push one of the emergency buttons by mistake (274) or that the r

Summary of the content on the page No. 13

the sensor (236), you could disable the no-stress device through its switch (289). This way you can work manually by using the control shackle (picture 5). Please contact an authorized technician anyway. EXCESSIVE VIBRATIONS The possible reasons for such a failure could be: unbalance of the cutting unit caused by the inclination of one or more shafts that support the hammers; breaking down of one or more hammers ; loosen driving elements. Find out the source of the problem and contac

Summary of the content on the page No. 14

louver only (171-172) and two of them if you are replacing the entire apron conveyor (145). Roll the rolling shutter until the louver without spring washers reaches the inspection overlay; extract the pin for the apron conveyor (170) and replace the louver or the complete apron conveyor. Mount the missing pin again (170) by using the inspection overlay, move back the louver without spring washers to the upper part, insert the washers on both sides and stretch the apron conveyor according to

Summary of the content on the page No. 15

Allen screw (143) (if necessary, you can heat the 143 screw with a hairdryer) When taking the pin (136) out, you can recover all hammers and all spacers. Before you rotate or replace the hammers, please check the surface condition of the pins (136, picture 3) and, if necessary, replace them. Do the same for the other three rows, too. Eventually you can assemble everything back together following the assembly chart of the rotor carefully (picture 4) A wrong assembly of the hammers and of

Summary of the content on the page No. 16

Assembly chart of the rotor DISTINTA BASE: n°144 Rotore n°136 Perno rotore n°137 Martello n°138 Distanziale spessore 14mm n°141 Distanziale spessore 5mm n°140 Distanziale spessore 10mm n°139 Distanziale spessore 15mm n°142 Rondella svasata n°143 Vite svasata piana 10x25 Ogni rotore ha 4 file ognuna diversa dalle altre. Ogni fila attraversa 4 settori uguali. 144 143 142 137 quarto settore terzo settore 138 secondo 139 settore 141 140 138 139 primo 138 settore 138 140 137 141 137 2 136

Summary of the content on the page No. 17

Stretching the driving belts: Open the door on the right (72) and stretch the driving belts by using the regulators (50) so that, if you press the belt with a finger, its lowering does not exceed its thickness. When you have to replace the driving belts, please loosen the regulators (50) so that the belts can come out from their seating. Replace the worn belts and stretch them as previously described. Assemble everything back together. The driving belts on the R 500 tractor model are S

Summary of the content on the page No. 18

Extraordinary Maintenance Check the condition of the hammers every 50 hours (137) Every time you replace the hammers, check the condition of the rotor pins (136) Check the wear of the tubes of the apron conveyor (145) every 100 hours. Check the wear of the leads of the apron conveyor (260) every 100 hours Check the height of the driving roller (54) every six months Grease the 12 bearings (133-36-195-186-97) every 100 hours. Check the wear and the backlash of the flexible coupling (11

Summary of the content on the page No. 19

STORAGE Every time your working session with the machine is over, please turn the tractor off, clean the shredding unit and check the stretching of the driving belts (see paragraph Maintenance) Make sure that the radiant mass of the air/oil exchanger is always clean to guarantee performances in time and, above all, to guarantee that the electric parts work, as they should. Clean the splits with compressed air or water taking care of directing the jet parallel to the splits in order not

Summary of the content on the page No. 20

TECHNICAL SPECIFICATIONS Noise emissions The acoustic pressure to the operator’s ear is in compliance with EN ISO 11201 and modified by the regulations relating to the machine: 117-dB (A). Total length: 5415 mm Total width: 2030 mm Total height: 2800 mm Inserting height: 960 mm Discharging height: 2700 mm Hopper width: 1450/960mm Hopper length: 2000mm Weight: 2270 Kg. Required tractor power: at least HP90 Number of revolutions at the PTO: 540 revolutions/minute OVERALL DR


Alternative user manuals
# User manual Category Download
1 Philips SVGA COLOUR MONITOR 7CM5209 User manual Chipper 0
2 Agri-Fab Chip-N-Vac 2468 User manual Chipper 1
3 Philips SVGA COLOUR MONITOR 7CM5279 User manual Chipper 2
4 Agri-Fab Chip-N-Vac 552493 User manual Chipper 0
5 Agri-Fab Chip-N-Vac 502493 User manual Chipper 1
6 Agri-Fab Chip-N-Vac 45-0253 User manual Chipper 0
7 Ashly CLX-52 User manual Chipper 16
8 Bolens 460 Series User manual Chipper 0
9 Ativa CS2171 User manual Chipper 0
10 Ativa CS 2165 User manual Chipper 0
11 Billy Goat TKD505SPT User manual Chipper 1
12 Billy Goat TKD501H User manual Chipper 1
13 Billy Goat KD510 User manual Chipper 1
14 Billy Goat KD510SP, TKD510SP User manual Chipper 0
15 Country Home Products C123E-CHP User manual Chipper 1