Summary of the content on the page No. 1
ST ANDON
For Serial Nos.
850,000 & Higher
Par t No. 4500-620 Rev . B
Summary of the content on the page No. 2
Exmar k r eser v es the right to mak e changes or add impr o v ements to its pr oducts at an y time without incur ring an y obligation to mak e such changes to pr oducts man uf actur ed pr eviousl y . Exmar k, or its distributor s and dealer s, accept no r esponsibility f or v ariations which may be evident in the actual specifications of its pr oducts and the statements and descriptions contained in this publication. © 201 1—Exmark Mfg. Co., Inc. Contact us at www .Exmark.com. Industrial Park B
Summary of the content on the page No. 3
Introduction CONGRATULATIONS on the purc hase of y our Exmark StandOn. T his product has been carefully designed and man ufactured to gi v e y ou a maxim um amount of de pendability and years of trouble-free operation. T his man ual contains assembly , operating, maintenance , adjustment, and safety instr uctions for Figure 1 y our StandOn. 1. Model and serial number location BEFORE OPERATING Y OUR MO WER, CAREFULL Y READ THIS MANU AL IN ITS ENTIRETY . Model No. By follo wing the operating, main
Summary of the content on the page No. 4
Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Safety Aler t Symbol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Safe Operating Practices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Safety and
Summary of the content on the page No. 5
Safety • Nev er let c hildren or untrained people operate Safety or ser vice the equipment. Local regulations ma y restrict the ag e of the operator . Safety Alert Symbol • T he o wner/user can prev ent and is responsible T his Safety Aler t Symbol ( Figure 2 ) is used both in for accidents or injuries occur ring to himself or this man ual and on the mac hine to identify impor tant herself , other people or proper ty . safety messag es whic h m ust be follo w ed to a v oid • Only adults and matu
Summary of the content on the page No. 6
Safety Operation • Alw a ys a v oid sudden star ting or stopping on a slope . If tires lose traction, diseng ag e the blades • Operate only in da ylight or g ood ar tificial light, and proceed slo wly off the slope . k ee ping a w a y from holes and hidden hazards . • F ollo w the man ufacturer’ s recommendations for • Stop engine , w ait for all mo ving par ts to stop , wheel w eights or counter w eights to impro v e remo v e k ey and eng ag e parking brak e whenev er stability . y ou lea v e t
Summary of the content on the page No. 7
Safety Safety and Instructional Decals • K ee p all safety signs legible . R emo v e all g rease , • New safety signs ma y be obtained from dir t and debris from safety signs and instr uctional y our authorized Exmark equipment dealer or labels . distributor or from Exmark Mfg . Co . Inc . • R e place all w or n, damag ed, or missing safety • Safety signs ma y be affix ed b y peeling off the signs . bac king to expose the adhesi v e surface . Apply only to a clean, dr y surface . Smooth to remo
Summary of the content on the page No. 8
Specifications Specifications Model Numbers Serial Nos: 850,000 and Higher ST ANDON Dimensions Length Height W eight Width 35.4 inc hes 18.5 inc hes 14.9 inc hes 50 lb (23kg) (89.9 cm) (47.0 cm) (37.9 cm) T ire Siz e T r ead Semi-Pneumatic Smooth 11 x 4.00–5 Tire F or Operators o v er 250 lb it is recommended to use pneumatic tire assembly P/N 103-3798. 8
Summary of the content on the page No. 9
Setup Setup Assembly Diagram Item Quantity Description 1 8 Nut, Nyloc 3/8-16 Flg 2 2 Plate , Bac k-Up 3 2 Plate , Adapter 8 4 Screw , HH 3/8-16 x 1 1/4 5 1 Asm, F rame Pull W/Decals 6 1 Asm, Pull Ar m W/Brgs 7 1 Guard, T op 8 1 Screw , HH 3/8–16 x 4 3/4 9 1 Nut, Hex Flg-Side Loc k 3/8-16 10 1 Asm, Sulk y F rame W/Decals 11* 2 Decals , R e placement (T urf T racer and Viking Hy dro Only) 12 1 W asher , Spring Disc *Not sho wn in illustration Figure 3 9
Summary of the content on the page No. 10
Setup Installing the StandOn Rider to Mower Mounting the Pull Frame 1. Locate the pull frame and tw o adapter plates . Install the pull frame to the adapter plates using four 3/8-16 x 1 1/4 inc h hex capscrews and four 3/8-16 inc h nyloc n uts as sho wn in Figure 4 . 4 3 Figure 5 2 1. Remove these two decals. 4 1 c . Center the adapter plates on the lo w er rear surface of the mo w er engine dec k and mark the four hole locations sho wn in Figure 6 . Drill four 0.407 inc h diameter holes through
Summary of the content on the page No. 11
Setup Choose the mount holes that will attain a distance of appro ximately 8 inc hes . b . Install the adapter plates to the mo w er engine dec k using tw o 3/8-16 x 1/4 inc h hex capscrews and tw o 3/8-16 inc h flang ed nyloc n uts as sho wn in Figure 9 . Figure 7 1. Replacement decals e . Align the pull frame and adapter plate assembly to the rear surface of the engine dec k. Measure the distance from the bottom of the pull frame to the g round. Choose the mount holes that will attain a distan
Summary of the content on the page No. 12
Setup Important: F or optimal perf or mance, the StandOn pull ar m top surf ace should be horiz ontal to the g r ound surf ace. T o obtain a position as close to horizontal as possible , the adjustment brac k ets and the platfor m wheel can be re positioned (see Adapter Plate and Tir e Adjustment section in Maintenance). Figure 10 1. Pull arm assembly 3. Pull frame 2. Quick connect pins 2. R emo v e the 3/8-16 x 4 3/4 inc h hex capscrew . spring disc w asher , and 3/8-16 inc h hex flang e side l
Summary of the content on the page No. 13
Operation 1. Use care when tur ning to ensure that y ou Do Not Operation swing y ourself and the sulk y into obstacles . Note: Deter mine the left and right sides of the 2. W hen tur ning, lean forw ard and to w ard the mac hine from the nor mal operating position. direction of the tur n to help in k ee ping balance . Pre-Start T ransporting 1. Mak e sure y ou understand the controls , their locations , their functions , and their safety T ransporting a Unit requirements . Place the StandOn in t
Summary of the content on the page No. 14
Maintenance Maintenance Note: Deter mine the left and right sides of the mac hine from the nor mal operating position. W ARNING W hile maintenance or adjustments ar e being made, someone could star t the engine. Accidental star ting of the engine could seriousl y injur e y ou or other bystander s. R emo v e the k ey fr om the ignition s witch, enga ge par king brak e, and pull the wir e(s) of f the spar k plug(s) bef or e y ou do an y maintenance to the unit or StandOn. Also push the wir e(s) as
Summary of the content on the page No. 15
Maintenance 11. Inser t the second bearing and new seal into the Lubricate Caster Wheel Hubs wheel. Service Interval : Y early 12. Apply a thread loc king adhesi v e to the second 1. Stop engine , w ait for all mo ving par ts to stop , and spacer n ut and thread onto the axle with the remo v e k ey . Eng ag e parking brak e . wrenc h flats facing outw ard. 13. T or que the n ut to 75-80 in-lb (8-9 N-m), loosen, then re-tor que to 20-25 in-lb (2-3 N-m). Mak e sure axle does not extend bey ond eit
Summary of the content on the page No. 16
Maintenance Adjustments Adapter Plate and T ire Adjustment Important: F or optimal perf or mance, the StandOn pull ar m top surf ace should be horiz ontal to the g r ound surf ace. T o obtain a horizontal pull ar m, the adapter plates and the platfor m wheel can be re positioned (see Figure 14 ). Figure 14 1. Adapter plates can be moved to adjust height position 2. Pull arm should be horizontal to ground 3. Wheel can be mounted in either hole for height adjustment Note: T o ac hiev e more g roun
Summary of the content on the page No. 17
Exmark Commercial Attachments and Accessories 1 Year Limited Warranty Conditions and Products Covered Owner’s Responsibilities Exmark Mfg. Co. Inc. and its affiliate, Exmark Warranty If your product requires warranty service it must be returned Company, pursuant to an agreement between them, jointly to an authorized Exmark service dealer within the warranty warrant on the terms and conditions herein, that we will repair, period. This warranty extends only to commercial attachments replace or
Summary of the content on the page No. 18
Service Record Date: Description of W ork Done: Service Done By: 18
Summary of the content on the page No. 19
G011841 Figure 15 This page may be copied for personal use. 1. The maximum slope you can safely operate the machine on is 20 degrees . Use the slope indicator to determine the degree of slope of hills before operating. Do Not operate this machine on a slope greater than 20 degrees. Fold along the appropriate line to match the recommended slope. 2. Align this edge with a vertical surface, a tree, building, fence pole, etc. 3. Example of how to compare slope with folded edge. 19
Summary of the content on the page No. 20
SEE EXMARK’S COMPLETE LINE OF ACCESSORIES AND OPTIONS MID-MOUNT RIDING ACCESSORIES AND OPTIONS CUSTOM RIDE SEAT SUSPENSION SYSTEM OPERATOR CONTROLLED DISCHARGE FULL SUSPENSION SEAT ROLL OVER PROTECTION SYSTEM (ROPS) DECK LIFT ASSIST KIT SUN SHADE HITCH KIT TRASH CONTAINER LIGHT KIT TURF STRIPER 12V POWER PORT ULTRA VAC COLLECTION SYSTEM MICRO-MULCH SYSTEM ULTRA VAC QUICK DISPOSAL SYSTEM OUT-FRONT RIDING ACCESSORIES AND OPTIONS CUSTOM RIDE SEAT SUSPENSION SYSTEM SNOW BLADE DUAL-TAIL WHEEL SNOWBLO
