Summary of the content on the page No. 1
TM
Power Pruner Attachment
Operator's Manual
MODEL 99944200532
FOR MODELS SRM-2100SB/2400SB
ENGLISH
SRM-210SB/211SB
SRM-225SB
SRM-260SB/261SB
ESPAñOL
PAS-2100/2400
PAS-210/211
PAS-230/231
PAS-260/261 FRANCAIS
PAS-265
WARNING
Read rules for safe operation and instructions carefully. ECHO provides an Opera-
tor's Manual and a Safety Manual for Pro Attachment Series power source or Split
Boom Trimmer. Those manuals and this manual must be read and understood for
Summary of the content on the page No. 2
2 Icuntrodt Ion Welcome to the ECHO family. This ECHO product was designed and manufactured to provide long life and on- the-job-dependability. Read and understand this manual and the SAFETY MANUAL you found in the same package. You will find both easy to use and full of helpful operating tips and SAFETY messages. the rot porae 's aumlna Read and understand this manual before operation. Keep it in a safe place for future reference. It contains specifications and information for operation,
Summary of the content on the page No. 3
TM Power Pruern ATT Ahc Men T 3 o Per A T or 's MAnu Al s afety lmanua safety ssmboly and I tan rtpmo I t nforma Ion Throughout this manual and on the product itself, you will find safety alerts and helpful, informational messages pre- ceded by symbols or key words. The following is an explanation of those symbols and key words and what they mean to you. CIRCLE AND SLASH SyMBOL DANGER This symbol means the specific action The safety alert symbol accompanied by the word shown is prohibite
Summary of the content on the page No. 4
4 lansrepo cond It Ion and safety uqe Imnetp WARNING TM TM Power Pruner Attachment users risk injury to themselves and others if the Power Pruner Attachment is used improperly and or safety precautions are not followed. Proper clothing and safety gear must be worn when oper- TM ating a Power Pruner . Hearing Protection Physical Condition Your judgment and physical dexterity may not be good: ECHO recommends wearing hearing protection whenever • if you are tired or
Summary of the content on the page No. 5
TM Power Prunre ATT Ach Mne T 5 o Per A T or 's MAnu Al Repetitive Stress Injuries -- It is believed that overusing the muscles and tendons of the fingers, hands, arms and shoulders may cause soreness, swelling, numbness, weakness and extreme pain in those areas. Certain repetitive hand activities may put you at a high risk for developing a Repetitive Stress Injury (RSI). An extreme RSI condition is Carpal Tunnel Syndrome (CTS), which could occur when your wrist swells and squeezes a vital n
Summary of the content on the page No. 6
6 Clear the Work Area • Spectators and fellow workers must be warned, and children and animals prevented from coming nearer than 15 m (50 ft.) while the unit is in use. Use Proper Clothing & Equipment • Always wear head protection with full face shield to help protect against falling branches and debris. Keep A Firm Grip • Hold the front and rear handles with both hands with thumbs and fingers encircling the handles Keep A Solid Stance • Maintain footing and balance at all times. Do not s
Summary of the content on the page No. 7
TM Power Pruern ATT Ach Mne T 7 o Per A T ro 's MAnu Al equ Ipment Before operation a complete check of the unit must be performed; • Check unit for loose/missing nuts, bolts and screws. Tighten and/or replace as needed. WARNING Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all openings. • ALWAyS stop engine, disconnect spark plug, and make sure all moving parts have come to a complet
Summary of the content on the page No. 8
8 c ontents The ECHO product you purchased has been factory pre-assembled for your convenience. After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing parts. Use the contents list to check for missing parts. TM 1 - Power Pruner Attachment - Plastic Bag (co-pack) - Operators Manual - Safety Manual - Warranty Registration Card - Guide Bar Cover - Storage Hook Assembly a y sembls power head shaft /lorew shaft y assembl B Tools Re
Summary of the content on the page No. 9
TM Power Pruner ATT Ach Men T 9 o Per A T or 's MAnu Al 5. Rotate locator pin (A) 1/4 turn clockwise to engage lower shaft hole. Insure locator pin is fully engaged by twisting lower drive shaft. Locator pin should snap flush in coupler. Full engagement will prevent further shaft rotation. 6. Secure lower shaft assembly to coupler by tightening clamping knob (D). front loop handel al remov Tools Required: Screwdriver. Parts Required: None NOTE Front loop handles/loop handles with barrier
Summary of the content on the page No. 10
10 o t arep Ion WARNING Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop before removing obstructions, clearing debris, or servicing unit. Allow unit to cool before performing service. Wear gloves to protect hands from sharp edges and hot surfaces. NOTE Refer to your Pro Attachment Series power source or Split Boom
Summary of the content on the page No. 11
TM Power Pruern ATT Ach Men T 11 o Per A T or 's MAnu Al nurp Ign etchn Iseuq correct The Power Pruner™ Attachment is designed for light to medium trim- ming of limbs and branches up to 203 mm (8 in.) in diameter. Follow these tips for successful operation. • Plan cut carefully. Check direction branch will fall. guIde Iaga nst branch • Long branches should be removed in several pieces. not • Do not stand directly beneath branch being cut. correct • When ready to cut: Hold "cutting shoe" agains
Summary of the content on the page No. 12
12 sk Ill levels Level 1 = Easy to do. Common tools may be required. Level 2 = Moderate difficulty. Some specialized tools may be required. am Intenance I als v ertn Component Maintenance Procedure Skill Level Interval Drive Shaft Grease 1 Every 25 hours of use Guide Bar Inspect/Clean/Lubricate 2 Before Each Use Saw Chain Inspect/Sharpen/Replace/Tension 2 Before Each Use Screws/Nuts/Bolts Inspect/Tighten/Replace 1 Before Each Use IMPORTANT - Time intervals shown are maximum. Actual use and
Summary of the content on the page No. 13
TM Power Pruern ATT Ach Mne T 13 o Per A T or 's MAun Al gu Ide bra and w sa cha In replacemten WARNING Never try to replace or adjust guide bar and saw chain with engine running. Always disconnect spark plug wire before servicing guide bar and saw chain. This saw chain is VERY sharp, wear heavy gloves to protect your hands when handling it. Wear eye protection meeting CE or ANSI specification Z87.1. Guide Bar Replacement / Installation Level 2 Tools Required: 10 mm Wrench, 4mm Hex
Summary of the content on the page No. 14
14 To Adjust Saw Chain Tension. Tools Required: 10 mm Wrench, Screwdriver WARNING Always wear gloves when handling saw chain, otherwise serious personal injury may result. 1. Loosen two guide bar nuts (A), if necessary. 2. Turn saw chain tensioner screw (B) clockwise to tighten saw chain on guide bar. Turning screw counter clockwise will loosen saw chain on guide bar. B 3. Tighten guide bar nuts (A) firmly. Pull the saw chain around the A guide bar by hand. Saw chain should m
Summary of the content on the page No. 15
TM Power Pruern ATT Ach Men T 15 o Per A T or 's MAnu Al f Il Ing w sa cha In Level 2. Tools Required: 4 mm (5/32 in.) round File Flat File 30° Depth Gauge IMPORTANT Dull or damaged cutters will result in poor cutting performance, 1 increased vibration and premature chain failure. WARNING Always stop engine and wear gloves when filing saw chain, other- 2 wise serious personal injury may result. 1. Set round file (A) in cutter at 30° angle. One fifth (1/5) of the file should be ex
Summary of the content on the page No. 16
16 s oraget Storage Hook Installation 1. Insert small end of hook into locating hole on attachment shaft. 2. Slide plastic cap onto end of attachment shaft. s pec If I t ca Ions TM MODEL ---------------------------------------------------- 99944200532 POWER PRUNER ATTACHMENT Length ------------------------------------------------------- 1448 mm (57.0 in.) Width -------------------------------------------------------- 102 mm (4.0 in.) Height ----------------------------------------------------
Summary of the content on the page No. 17
TM Power Pruner ATT Ach Men T 17 o Per A T or 's MAnu Al enots
Summary of the content on the page No. 18
18 notes
Summary of the content on the page No. 19
TM Power Pruner ATT Ach Men T 19 o Per A T or 's MAnu Al enots
Summary of the content on the page No. 20
s v re Ic Ign I t mrofna Ino rtsa p /ser Ial number Genuine ECHO Parts and ECHO REPOWER™ Parts and Assem- blies for your ECHO products are available only from an Authorized ECHO Dealer. When you do need to buy parts always have the Model Number and Serial Number of the attachment with you. You can find these numbers on the driveshaft model/serial number label. For future reference, write them in the space provided below. Model No. ______________SN._________________________ DEALER? v er
