Summary of the content on the page No. 1
ECHO Yard Shield System
Instruction Manual
MODEL 99944200300 MODEL
To use as a blower only, refer to the Operator's Manual
included with the Power Blower unit.
WARNING DANGER
Read rules for safe operation and all instructions carefully. ECHO provides this Instruction
Manual which must be read and understood for proper and safe operation.
X767000121
X7671130001
05/07
Summary of the content on the page No. 2
2 INTRODUCTION Welcome to the ECHO family. This ECHO product was designed and manufactured to provide long life and on-the-job dependability. Read and understand this manual. You will find it easy to use and full of helpful operating tips and SAFETY messages. THE INSTRUCTION MANUAL Contains specifications and information for safety, assembly, operation, maintenance, storage, troubleshooting, and service specific to this product. TABLE OF CONTENTS Introduction .................................
Summary of the content on the page No. 3
ECHO YARD SHIELD SYSTEM 3 INSTRUCTION MANUAL OPERATOR SAFETY WARNING • Before opening a chemical container, carefully read, understand, and follow all instructions on the label. • Carefully read and understand the Operator’s Manual supplied with this unit prior to filling, using, and/or cleaning this system. • DO NOT use flammables or corrosives in the system. They can cause damage to the unit, ignite, or explode, causing serious injury. CAUTION Chemical Hazard. Do not ingest ECHO Yard Shie
Summary of the content on the page No. 4
4 DESCRIPTION Locate all safety decals on your unit. Make sure the decals are legible and that you understand and follow the instruc- tions on them. If a decal cannot be read, a new one can be ordered from your ECHO dealer. See PARTS ORDERING instructions for specific information. 9 1 2 3 8 4 5 7 6 10 11 1. HOSE GUIDES - Route clear supply hose through guides to keep hose out of the way and provide consistent flow of Yard Shield agent. 2. QUICK DISCONNECT - Disconnect to refill tank with chem
Summary of the content on the page No. 5
ECHO YARD SHIELD SYSTEM 5 INSTRUCTION MANUAL ASSEMBLY CONVERTING BLOWER TO YARD SHIELD SYSTEM (PB-200) 1. Turn blower pipes counter clockwise to remove from blower. 2. Attach hose guides (A) to each of the two holes on PB-200 A A handle. Secure hose guides by pushing thumb snaps into place. 3. Align grooves in Yard Shield pipe with pegs on blower housing and slide Yard Shield pipe onto housing. Twist pipe clockwise to lock into place. Assure clear hose runs along top of pipe. Tip: For best re
Summary of the content on the page No. 6
6 CONVERTING YARD SHIELD SYSTEM BACK TO BLOWER (PB-200) 1. Thoroughly clean and rinse tank and spraying assembly after each use. 2. Disconnect supply hose from tank hose at quick disconnect valve. 3. Remove supply hose from hose guides. 4. Remove Yard Shield pipe by turning counter clockwise. 5. See PB-200 Operator's Manual for instructions on installing blower pipes.
Summary of the content on the page No. 7
ECHO YARD SHIELD SYSTEM 7 INSTRUCTION MANUAL CONVERTING BLOWER TO YARD SHIELD SYSTEM (PB-251) 1. Release locking ring (C) with a coin or screwdriver, and rotate ring counter clockwise so that lock symbol (A) is at top of ring. 2. Remove blower pipes from locking ring. 3. Align locking ribs (D) on blower pipe adapter with recesses in locking ring, and slide adapter into locking ring. D C 4. Rotate locking ring (C) clockwise 1/8 turn to lock adapter in place. 5. Align grooves in Yard Shield pipe
Summary of the content on the page No. 8
8 6. Route supply hose through handle, toward back of blower. 7. Attach hose to tank hose at quick disconnect valve. CONVERTING YARD SHIELD SYSTEM BACK TO BLOWER (PB-251) 1. Disconnect supply hose from tank hose at quick disconnect valve. 2. Remove supply hose from handle.
Summary of the content on the page No. 9
ECHO YARD SHIELD SYSTEM 9 INSTRUCTION MANUAL 3. Remove Yard Shield pipe by turning counter clockwise. 4. Release locking ring (C) with a coin or screwdriver, and turn ring counter clockwise so that lock symbol (A) is at top of ring. 5. Remove adapter from locking ring (C). 6. See Power Blower Operator's Manual for instructions on installing blower pipes.
Summary of the content on the page No. 10
10 OPERATION MIXING INSTRUCTIONS YARD SHIELD CHEMICAL CONCENTRATE PRECAUTIONARY STATEMENTS HAZARDS TO HUMANS AND DOMESTIC ANIMALS CAUTION Causes eye irritation. Harmful if swallowed, inhaled, or absorbed through skin. Avoid contact with skin, eyes, or clothing. Avoid breathing vapor or spray mist. Wash thoroughly with soap and water after handling and before eating, drinking, chewing gum, or using tobacco. Remove and wash contaminated clothing before reuse. ENVIRONMENTAL HAZARDS This pestic
Summary of the content on the page No. 11
ECHO YARD SHIELD SYSTEM 11 INSTRUCTION MANUAL 1. Disconnect quick disconnect valve (A) by pushing silver button. CAUTION To prevent leaking, mix chemical while tank pigtail hose is discon- nected from blower. 2. Remove cap from tank. To mix a full tank, pour 1.25 ounces of A Yard Shield concentrate into tank. Fill tank with water to 1.5 gallon mark. Use graduation marks on concentrate bottle and backpack tank to mix less than a full tank of solution. Mix only as much as you will use in one s
Summary of the content on the page No. 12
12 1. Push silver button on shutoff valve (B) to disengage valve, and prevent chemical flow. B 2. Start blower. (See PB-200 operator’s manual for step by step instructions on starting and stopping.) 3. Put backpack on back, and adjust straps for comfortable fit. 4. Set blower to half speed or higher. 5. Connect tank hose to clear hose on blower at quick disconnect valve (A). NOTE Assure blower is operating at half speed or higher before engaging shutoff valve (B). A 6. Engage shutoff valve (B) t
Summary of the content on the page No. 13
ECHO YARD SHIELD SYSTEM 13 INSTRUCTION MANUAL MAINTENANCE, STORAGE (According to M86 Web Site (ECHO FAQ's) you can!) 1. After each use, remove cap and rinse tank thoroughly with clean water. CAUTION Never pour pesticides down the toilet drain, into the gutter, or on the ground. 2. Add water to tank and operate system to flush completely. 3. Allow entire system to dry thoroughly before storing. 4. Always store tank clean and empty in a cool, dry location. 5. Follow instructions for engine storag
Summary of the content on the page No. 14
14 NOTES
Summary of the content on the page No. 15
ECHO YARD SHIELD SYSTEM 15 INSTRUCTION MANUAL NOTES
Summary of the content on the page No. 16
SERVICING INFORMATION PARTS Genuine ECHO Parts and ECHO REPOWER™ Parts and Assemblies for your ECHO products are available only from an Authorized ECHO Dealer. When you do need to buy parts, always have the Model Name and Number on the front of this manual. (See your Operator's Manual for Model and Serial Number information to order blower parts. For future reference, write the model number in the space provided below. Model No. ______________________ SERVICE Service of this product during the
