Summary of the content on the page No. 1
P Please read this manual and save it lease read this manual and save it
w with your original sales receipt. ith your original sales receipt.
T Tools needed for assembly: Phillips ools needed for assembly: Phillips
Screwdriver Screwdriver, Slotted Screwdriver and , Slotted Screwdriver and
H Hammer (both not included) and ammer (both not included) and
Assembly T Assembly Tool (included). ool (included).
® ®
U Use only with a Power Wheels se only with a Power Wheels 6 V 6 Vo olt lt
( (4.0 A
Summary of the content on the page No. 2
TABLE OF CONTENTS Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Parts Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 3
IMPORTANT INFORMATION ELECTRICAL HAZARD DANGER • To prevent electric shock, do not immerse in water; wipe clean with a damp cloth. WARNING • Battery can fall out and injure a child if vehicle tips over. Always use battery retainer. • PREVENT FIRE - Never modify the electrical system. Alterations could cause a fi re resulting in serious injury and could also ruin the electrical system. - Use of the wrong type battery or charger could cause a fi re or explosion resulting in serious injury. ®
Summary of the content on the page No. 4
PARTS • If you experience a problem with this product, or are missing a part, please call us at 1-800-348-0751, rather than return this product to the store. • Please identify all parts before assembly and save all packaging material until assembly is complete to ensure that no parts are discarded. • Metal parts have been coated with a lubricant to protect them during shipment. Wipe all metal parts with a paper towel to remove any excess lubricant. Steering Wheel Cap Steering Column Cover Ste
Summary of the content on the page No. 5
PARTS PICTURE 1 2 3 15 4 5 9 6 7 10 11 12 8 2 14 13 1 Steering Wheel Cap 6 Steering Column 11 Handle Not Shown 2 Lock Nut - 2 7 Battery Retainer 12 Vehicle Label Sheet 3 Steering Wheel 8 6 Volt Battery 13 Steering Column Cover #8 x ¾ " Screw - 2 4 Turn Signal 9 Seat Belt - 2 14 6 Volt Charger Assembly Tool 5 Dash 10 Seat 15 Key T3260pr-0920 5
Summary of the content on the page No. 6
BATTERY CHARGING ELECTRICAL HAZARD ELECTRICAL HAZARD CAUTION WARNING Use the charger in dry locations only. • Battery can fall out and injure a child if vehicle About Thermal Fuses tips over. Always use battery retainer. ® Your Power Wheels 6 volt (4.0 Amp/Hr.) battery is equipped • PREVENT FIRE with a built-in thermal fuse. The thermal fuse is a self-resetting safety device which automatically “trips” and shuts down - Never modify the electrical system. operation of the vehicle if the ve
Summary of the content on the page No. 7
BATTERY CHARGING ASSEMBLY Charger WARNING Battery Connector Connector Children can be harmed by small parts, sharp edges and sharp points in the vehicle’s unassembled state, or by electrical items. Care should be taken in unpacking and assembly of the vehicle. Children should not handle parts, including the battery, or help in assembly of the vehicle. 1 • Plug the battery connector into the charger connector. Dash Key 1 • Insert and “snap” the key into the dash. 2 • Plug the charger into a
Summary of the content on the page No. 8
ASSEMBLY Dash Wire Connector 3 DASH VIEW Pull • Insert two #8 x ¾ " screws straight into the dash, as shown. Tighten the screws. Hint: If the screw holes in the dash do not align with the vehicle, place a finger in the steering wheel opening in the dash. Pull the dash toward the back of the vehicle to reposition it. Steering Column 2 SIDE VIEW • Locate the wire connector inside the front end of the vehicle. • While feeding the wire connector through the hole in the dash, fit the tabs on th
Summary of the content on the page No. 9
ASSEMBLY Steering Wheel Lock Nut End of Steering Column Wire with Connector Turn Signal 7 • Position the turn signal with the hollow side down. • Fit the wire with connector on the end of the steering wheel through the center of the turn signal. • Fit the turn signal onto the steering wheel. Steering Linkage Motor Harness Connector 5 Steering Wheel Connector • Fit the end of the steering column through the hole in the steering linkage. • Fit a lock nut onto the end of the steering column.
Summary of the content on the page No. 10
ASSEMBLY Seat Belt End of Steering Column Fasteners Folded Tab Lock Nut Folded Tab Folded End Folded End 12 10 • Position both seat belts so that the fasteners face each other, as shown. • Fit the remaining lock nut onto the end of the steering column. • Fit the folded end of each short seat belt down through the outer slots in the seat. Do not insert the folded tab into the • Tighten the lock nut with the assembly tool. slot. Pull up on each seat belt to make sure it is secure. Steering Wh
Summary of the content on the page No. 11
ASSEMBLY VEHICLE CARE • Check all screws, lock nuts, and their protective coverings regularly and tighten as required. Check plastic parts on a regular basis for cracks or broken pieces. • During snowy or rainy weather, the vehicle should be stored inside or under a protective cover. Remember to charge the battery at least once per month while your vehicle is not in regular use. • Avoid operating the vehicle in wet or snowy conditions, and do not spray the vehicle with a hose. Do not wash
Summary of the content on the page No. 12
DECORATION Proper label application will help to keep the labels looking their best! When applying labels, keep the following guidelines in mind: • Before applying the labels, wipe the surface of the vehicle with a clean, dry cloth to remove any dust or oils. • Place the labels exactly as shown in the illustrations. • For best results, avoid repositioning a label once it has been applied to the vehicle. After applying a label, rub the label firmly with a clean, dry cloth to make sure the labe
Summary of the content on the page No. 13
BATTERY INSTALLATION ® IMPORTANT! Use only a Power Wheels 6 volt (4.0 Amp/Hr.) Battery Connector battery and built-in thermal fuse. Use of any other battery will damage your vehicle. Make sure that you charge the battery for Battery Retainer ® at least 18 hours using the enclosed Power Wheels 6 volt (4.0 Amp/Hr.) charger before operating your vehicle for the first time. Charge the battery for at least 14 hours after each use of the vehicle. Never charge the battery longer than 30 hours.
Summary of the content on the page No. 14
BATTERY CARE AND DISPOSAL Care Disposal If a battery leak develops, avoid contact with the leaking acid ® • Your Power Wheels battery is a non-spillable sealed lead-acid and place the damaged battery in a plastic bag. See information battery. It must be recycled or disposed of in an environmentally below for proper disposal. sound manner. If acid comes in contact with skin or eyes, flush with cool water • Do not dispose of a lead-acid battery in a fire. The battery may for at least 15 minut
Summary of the content on the page No. 15
SAFE DRIVING RULES Teach Safety Rules to Children RIDING HAZARD While children can quickly develop the skill necessary to drive this vehicle, it is important to remember that their judgment skills are still very immature. Unsupervised driving by children can WARNING lead to serious injury. Before children use this vehicle, an adult should carefully evaluate the driving area as well as the children’s • Prevent Injuries and Deaths skill level and ability to drive this vehicle safely. Childre
Summary of the content on the page No. 16
VEHICLE OPERATION IMPORTANT! Use this vehicle ONLY outdoors. Most interior Stage 2 - Child Driver flooring can be damaged by riding this vehicle indoors. ® Fisher-Price will not be responsible for damage to the floor if the vehicle is used indoors. Handle Stage 1 - Parent Assisted PRESS Latch Note: Be sure the end of the handle is clean and free from debris before reinserting. • Make sure the front wheels are not turned. • Locate the latch next to the steering handle. • Make sure the handle i
Summary of the content on the page No. 17
PROBLEMS AND SOLUTIONS GUIDE IMPORTANT! If you experience a problem with your vehicle, first check the Problems and Solutions Guide below. If you still ® experience a problem, please contact Power Wheels Consumer Relations, toll-free at 1-800-348-0751. Or, contact your local ® Power Wheels authorized service center. For the location nearest you, please visit us on-line at www.powerwheels.com. PROBLEM POSSIBLE CAUSE SOLUTION Vehicle does not run Undercharged battery Charge the battery. A new
Summary of the content on the page No. 18
PROBLEMS AND SOLUTIONS GUIDE PROBLEM POSSIBLE CAUSE SOLUTION Vehicle was running but Loose wires or loose connectors Check all wires and connectors. Make sure the battery suddenly stopped connect or is tightly plugged into the motor connector, and that there are no loose wires around the motors. Tripped thermal fuse The b uilt-in thermal fuse may "trip" and shut down operation of the vehicle if the vehicle is overloaded or the driving conditions too severe. Once a fuse has "tripped", rele
Summary of the content on the page No. 19
PROBLEMS AND SOLUTIONS GUIDE PROBLEM POSSIBLE CAUSE SOLUTION Vehicle runs sluggishly Undercharged battery Charge the battery. A new battery should have been charged for at least 18 hours before using the vehicle for the fi rst time. After fi rst-time use, recharge the battery for at least 14 hours after each use. Never charge the battery longer than 30 hours. Check all connectors. Make sure the battery connector is tightly plugged into the charger connector, and that the
Summary of the content on the page No. 20
Before first-time use, you must charge the battery 18 hours! Charge the battery immediately after each use. Charge the battery once a month, even if the vehicle is not used or stored. Do not return yourvehicle to the store! CONSUMER ASSISTANCE 1-800-348-0751 (US & Canada) Fisher-Price, inc., 636 Girard Avenue, East Aurora, NY 14052. Hearing-impaired consumers: 1-800-382-7470. Or contact your local independently owned and operated ® Power Wheels Authorized Service Center. For the location ne
