Summary of the content on the page No. 1
HARDWARE
®
HOUSE
ELECTRIC STAPLEGUN
Model HH34392
OPERATING
INSTRUCTIONS
®
Summary of the content on the page No. 2
Safety Information WARNING: Follow all safety precautions outlined in these oper- ating instructions. Improper use of this tool can cause severe injury or death from fire, electrical shock, or firing staple into body. Before Operating Tool 1. Read and understand these operating instructions before operating tool. 2. Only well-instructed adults should operate tool. Never allow children to operate tool. 3. Do not operate tool • where highly flammable liquids or gases are present • while under the
Summary of the content on the page No. 3
During Operation of Tool 1. Keep all parts of body away from staple exit on tool. 2. Never point tool at anyone. 3. Keep children, animals, and bystanders away from tool and extension cord at all times. Only tool user should be in work area. 4. Stay alert. Use common sense while operating tool. 5. Keep trigger lock in the OFF position and finger off trigger until ready to drive staple. 6. Keep work area clean. Cluttered work areas invite injuries. 7. Secure work before using tool. Use both hands
Summary of the content on the page No. 4
Product Identification Head Hand Grip On/Off Trigger Lock Trigger Power Cord Staple Chamber Cover (underneath) Staple Exit Product Features ® The Hardware House Electric StapleGun is a multi-purpose tool. This tool is designed for home and workshop. It performs basic fastening jobs from installing insulation, porch screening, and ceiling tiles to repairing upholstery. Trigger This tool has an easy squeeze trigger. The trigger is located under- neath the hand grip. Each squeeze of the trigger fire
Summary of the content on the page No. 5
Extension Cords CAUTION: Use only extension cords marked for outdoor use. Be sure to use the right size extension cord. If cord size is wrong, tool may be damaged. Tool performance may also be affected. Extension Cord Size Requirement 1 to 25 feet, use 16 AWG rated cord 26 to 50 feet, use 14 AWG rated cord Inspect extension cords often and replace if damaged. Loading Tool WARNING: Never load tool while it is plugged in. Accidental discharge may occur. Before loading, move trigger lock to the O
Summary of the content on the page No. 6
4. Drop staples in channel (see Figure 4). ® Note: We recommend that you only use Hardware House heavy-duty, narrow-crown staples in this tool. Wrong staples can cause jamming. 5. Slide staple chamber cover closed. Make sure cover locks into place. Staples Figure 4 Operating Tool WARNING: Keep trigger lock in the OFF position and finger off trigger until ready to drive staple. WARNING: Keep all body parts away from staple exit on tool. 1. Make sure trigger lock is in the Trigger Lock OFF posit
Summary of the content on the page No. 7
5. Squeeze trigger to fire. 6. IMPORTANT: Do not fire this tool when empty of staples. This may damage tool. Note: In difficult fastening jobs, press down on head of tool with palm of free hand (see Figure 6). This will improve staple driving. Figure 6 Maintenance WARNING: Do not alter this tool in any way. Only use accessories designed for this tool. WARNING: Never perform steps listed below while tool is plugged in. Accidental discharge may occur. Move trigger lock to the OFF position and un
Summary of the content on the page No. 8
Staples ® We recommend that you only use Hardware House heavy-duty, narrow-crown ® staples. These staples are available in five lengths. Hardware House heavy- duty, narrow-crown staples can be found where you purchased your staplegun. STAPLES Staple Brand Hardware ® House Staple Hardware ® ® ® ® ® Model No Size House PowerFast Arrow PowerShot Stanley 1/4" HH36504A 36504A 504 97-010 TRA704 HH34392 5/16" HH36505A 36505A 505 97-011 TRA705 Use: 3/8" HH36506A 36506A 506 97-012 TRA706 1/2" HH36508A 36
