Summary of the content on the page No. 1
Straight Finish Nailer
Operating Instructions and Parts Manual
CHN70500
Fa r na ç ie s : P age 21
IN729900AV 6/10
es Pa:loñ Página 41
© 2010 Campbell Hausfeld/Scott Fetzer
MAKES IT EASY TO DO IT LIKE A PRO chpower.com
Summary of the content on the page No. 2
Table of Contents Description . . . . . . . . . . . . . . . . . . . . . . . . . 3 Loading / Unloading The Nailer . . . . 11 Specifications . . . . . . . . . . . . . . . . . . . . . . . 3 Loading the Nailer . . . . . . . . . . . . . . 11 Safety Guidelines . . . . . . . . . . . . . . . . . . . . 4 Unloading the Nailer . . . . . . . . . . . . 11 Safety Symbols . . . . . . . . . . . . . . . . . . . . . . 4 Adjusting the Nail Penetration . . . . . 11 Important Safety Information . . . . . . . . 4 Adj
Summary of the content on the page No. 3
Operating Instructions and Parts Manual Straight Finish Nailer Description This nailer is designed for decorative trim, molding, window and door casings, Specifications furniture trim, door jamb installation, and picture frame assembly. Features include: Model CHN70500 convenient rear loading magazine which holds up to 110 nails, tethered no-mar tip with stud finder function, quick clear nose, an adjustable depth of drive mechanism, Requires: 0.7 Avg SCFM using 10 oil free, electronic low na
Summary of the content on the page No. 4
Operating Instructions and Parts Manual CHN70500 Important Safety Information Safety Guidelines INstru Ct IoNs Pert AININg to A rI sk o F FIre, ele Ctr IC sHoCk, or INjury to Perso Ns This manual contains information that is very This manual contains important safety, operational and maintenance information. If important to know and you have any questions, please call 1-800-543-6400 for customer assistance. understand. This information When using tools, basic precautions should always be
Summary of the content on the page No. 5
Operating Instructions and Parts Manual CHN70500 Important Safety Information (Continued) Perso NAl sAFety This is a Class IIIA a. Stay alert. Watch what you are doing and use common Laser Product that laser sense when operating the tool. Do not use the tool radiation while tired or under the influence of drugs, alcohol, or h. Never look directly into medication. A moment of inattention while operating the the laser beam or its tool increases the risk of injury to persons. dire
Summary of the content on the page No. 6
Operating Instructions and Parts Manual CHN70500 Important Safety Information (Continued) e. Always work in a well-ventilated area. Wear o SHA- m. The product will emit a laser beam from the aperture. approved dust mask. The users of the product shall be limited to professional operators. In normal operation and maintenance Always disconnect the tool from the power conditions, the operators shall wear protective eyewear to source when unattended, performing any maintenance or repair,
Summary of the content on the page No. 7
Operating Instructions and Parts Manual CHN70500 Important Safety Information (Continued) Unpacking serv ICe After unpacking the unit, inspect carefully for any damage that may have occurred during transit. Check for loose, missing a. Tool service must be performed only by qualified repair or damaged parts. Make sure to tighten fittings, bolts, etc., personnel. before putting unit into service. Check to be sure all supplied b. When servicing a tool, use only identical replacement acce
Summary of the content on the page No. 8
Operating Instructions and Parts Manual CHN70500 Glossary Become familiar with these terms before operating the unit. ACTUATe (Too L) — To cause movement to the tool’s component(s) intended to drive the fastener. ACTUATIo N SYSTeM — The use of a trigger, work contact element (WCE) and/ or other operating control, separately or in combination or sequence, to actuate the tool. AIR INLeT — The opening in which the compressed air supply is connected, Figure 3 - Quick Coupler usually by means
Summary of the content on the page No. 9
Operating Instructions and Parts Manual CHN70500 Getting To Know Your Straight Finish Nailer Like A Pro Features ANt I-dry F Ire Tethered Bubble Level Conversion Switch This tool is equipped with an Anti-Dry ADC No-mar / Thumbwheel Stud finder Fire feature. This prevents the Work Tip Contact Element (WCE) from being Adjustable pushed in when only a few nails remain. Exhaust Simply load new nail clip behind Work Deflecter remaining nails to continue shooting. Contact Element t et Here
Summary of the content on the page No. 10
Operating Instructions and Parts Manual CHN70500 Set-Up l uBr ICAt IoN 70 psi Minimum This nailer requires No lubrication for normal operation. However, lubrication will No T harm the tool. 120 psi Maximum The work surface can become damaged by excessive lubrication. Chart 1 MINIMuM CoMPoNeNts r eQuIred For Hook-u P AIR Co MPReSSo R: The air compressor must be able to maintain a minimum of 70 psi when the nailer is being used. An inadequate air supply can cause a loss of power and Rated
Summary of the content on the page No. 11
Operating Instructions and Parts Manual CHN70500 Set-Up (Continued) l oAdINg / uNlo AdINg tH e NAIler Always disconnect the tool from the air supply before loading / unloading fasteners. Choose which length of fastener you want to use for you project. Additional fasteners can be found at major home centers. l oading the tool 1. Pull pusher back until it latches. 2. Insert nail clips into rear loading slot. 3. Press pusher latch button to release the pusher and allow it to engage the nail clip.
Summary of the content on the page No. 12
Operating Instructions and Parts Manual CHN70500 Pre-Operation Depress WCE first... oPer At IoNAl Modes Always know the operational mode of the nailer before using. Failure to know the operational mode could result in death or serious injury. This nailer may be operated in the “Sequential” mode (as supplied by the manufacturer) or “Bump” mode. the tool may be converted from one mode to the other by firmly pressing the conversion switch from one position to the other. Press the conversion s
Summary of the content on the page No. 13
Operating Instructions and Parts Manual CHN70500 Pre-Operation (Continued) 4. Use a scrap piece of wood as a work surface. 5. Depress the WCE against the work surface without pulling the trigger (See Figure 16). The nailer MUST No T o PeRATe. Do not use the tool if it operates without pulling the trigger. Personal injury may result. 6. Remove nailer from work surface. The WCE must return to its original down position. Pull the trigger (See Figure 17). The nailer MUST No T o PeRATe. Do not u
Summary of the content on the page No. 14
Operating Instructions and Parts Manual CHN70500 Operation NAIl Pl ACeMeNt lA ser Po INter The tool is equipped with a laser mounted near the nose. Turn the electronics switch to the o N position. When the Work Contact Element (WCE) touches the workpiece and slightly moves, the laser will shine on the spot where the nail will be driven. This can be seen through the wide slots in the WCE and / or no-mar tip. When the laser is in the desired location, simply fully press in the WCE and fire the
Summary of the content on the page No. 15
Operating Instructions and Parts Manual CHN70500 Operation (Continued) stud FINder To find studs in walls, the no-mar tip also acts as a convenient stud finder with operation similar to most common stud finders. 1. Disconnect tool from air supply. 2. If not already installed, put the no-mar tip on the Work Contact Element (WCE). 3. Load tool with fasteners (see Loading the Tool section). 4. Reconnect tool to air supply. Turn the electronics switch to the “ON” position. 5. Barely press the tip a
Summary of the content on the page No. 16
Operating Instructions and Parts Manual CHN70500 Maintenance (Continued) r ePl ACeMeNt P Arts Use only genuine Campbell Hausfeld service parts. Tool performance, safety and durability could be reduced if improper parts are used. When ordering replacement parts, specify by part number. BAttery r ePl ACeMeNt Always disconnect the tool from the power source when unattended, performing any maintenance or repair, clearing a jam, loading, unloading , or moving the tool to a new location. Th
Summary of the content on the page No. 17
Operating Instructions and Parts Manual CHN70500 Troubleshooting Guide Stop using nailer immediately if any of the following problems occur. Serious personal injury could result. Any repairs or replacements must be done by a Qualified Service Person or Authorized Service Center. SYMPTOM CAUSe SOLUTION Air leaking at trigger valve O-rings in trigger valve housing are Replace O-rings. Check operation of Work Contact damaged Element (WCE) Air leaking between housing 1. Damaged O-rings and / or
Summary of the content on the page No. 18
Operating Instructions and Parts Manual CHN70500 For Replacement Parts or Technical Assistance, Call 1-800-543-6400 Please provide following information: Address any correspondence to: - Model number Campbell Hausfeld - Serial number (if any) Attn: Customer Service - Part description and number as shown in parts list 100 Production Drive Harrison, OH 45030 U.S.A. 109 108 1 2 16 13 103 3 107 17 106 102 18 105 4 5 19 104 59 6 69 20 21 7 70 31 9 52 51 8 60 53 71 22 76 61 73 72 32 62 43 77 44
Summary of the content on the page No. 19
Operating Instructions and Parts Manual CHN70500 Replacement Parts List ref. Part ref. Part No. description No. Qty. No. description No. Qty. 1 Screw – M6 x 20 k 1 66 Screw – M4 x 10 2 2 Bushing k 1 67 Spring 1 3 Exhaust cap — 1 68 Slide piece 1 4 Gasket l 1 69 O-ring l 1 5 Muffler assembly l 1 70 O-ring l 1 6 Bubble level s 1 71 Lower valve body 1 7 Socket head cap screw – M5 x 25 k 6 72 Spring pin 2 8 Washer k 6 73 Trigger valve 1 9 Cylinder cap — 1 74 Trigger spring 1
Summary of the content on the page No. 20
Operating Instructions and Parts Manual CHN70500 Reminder: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping. Warranty 1. DURATION: From the date of purchase by the original purchaser as follows: One Year. 2. WHO GIVES THIS WARRANTY (WARRANTOR): Campbell Hausfeld / Scott Fetzer Company, 100 Production Drive, Harrison, Ohio, 45030, Telephone: (800) 543-6400 3. WHO RECEIVES THIS WARRANTY (PURCHASER): The original purchaser (other than
