Summary of the content on the page No. 1
WS-6118U-IT
ATOMIC CLOCK WITH OUTDOOR WIRELESS TEMPERATURE
AND MOON PHASE
Instruction Manual
This product offers:
INSTANT TRANSMISSION is the
state-of-the-art new wireless
transmission technology,
exclusively designed and developed
by LA CROSSE TECHNOLOGY.
INSTANT TRANSMISSION offers you
an immediate update (every 4
seconds!) of all your outdoor data
measured from the transmitters:
follow your climatic variations in
Summary of the content on the page No. 2
• Wall mount or freestanding • Current moon phase display OUTDOOR TEMPERATURE TRANSMITTER: Holder • Remote transmission of outdoor temperature to the atomic clock by 915 MHz signals • Wall mounting case TO INSTALL AND REPLACE BATTERIES IN THE ATOMIC CLOCK The atomic clock uses 2 x AA, 1.5V batteries. To install and replace the batteries, please follow the steps below: 1. Insert finger or other solid object in the s
Summary of the content on the page No. 3
• Weekday setting • 12/24 hour time display setting • ºC or ºF setting TIME ZONE SETTING After entering the manual setting mode as described above, the time zone can be set between the +12 to –12 hour or Greenwich Mean Time (GMT) range in LCD2. To do this: 1. The time zone (LCD2) will start flashing (Default setting "-5h“). Select the desired time zone by pressing and releasing the + key. Note: The time zones from –4 to –10 hours will be displayed with 3 characters abb
Summary of the content on the page No. 4
ALARM SETTING To enter into the alarm setting mode: 1. Hold the ALM key for 4 seconds. The hour digits start flashing. 2. Press and release the + key to set the hour. 3. Press and release the ALM key to set the minutes. The minute digits start flashing. 4. Press and release the + key to set the minutes. 5. Press and release again the ALM key to exit the Alarm setting mode or wait for 15 seconds automatic timeout. TO DEACTIVATE THE ALARM: Alarm icon ((( •))) (ON) The
Summary of the content on the page No. 5
To achieve a true temperature reading, avoid mounting where direct sunlight can reach the outdoor temperature transmitter. It is recommended to mount the outdoor temperature transmitter on a North-facing wall or in any well shaded area. The maximum transmitting range is 330 feet (100 meters) obstacles such as walls, concrete, and large metal objects can reduce the range. Place both units in their desired location, and wait approximately 10 minutes before permanently mounting to ensure that
Summary of the content on the page No. 6
a receivable range from the transmitter. 3) Move the units to another location. Interferences from other electrical devices operating on the same signal frequency (915MHz) may prevent correct signal transmission and reception. "OF.L“ appears in the outdoor Problem: temperature section of the LCD. Solution: 1) Wait until the current surrounding temperature cools down or increases. Current temperature is outside of the measuring range of the transmitter. The outdoor temperature
Summary of the content on the page No. 7
WARRANTY INFORMATION La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship. This limited warranty begins on the original date of purchase, is valid only on products purchased and used in North America and only to the original purchaser of this product. To receive warranty service, the purchaser must contact La Crosse Technology, Ltd for problem determination and service procedures. Warranty service can only
