Summary of the content on the page No. 1
ZANUSSI
User
Manual
Washing
Machine
ZWF180M
ZWF1000M
Summary of the content on the page No. 2
Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _2 _ _ _ _ _ Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ 13 _ _ _ _ _ Product description _ _ _ _ _ _ _ _ _ _ _ _ 4 _ _ _ _ _ What to do if ... _ _ _ _ _ _ _ _ _ _ _ _ _ _ 15 _ _ _ _ Control Panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5 _ _ _ _ Technical data _ _ _ _ _ _ _ _ _ _ _ _ _ _ 17 _ _ _ _ _ Washing programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ 7-8 Installation
Summary of the content on the page No. 3
ZANUSSI � All packing and transit bolts must be removed If volatile cleaning fluids are used, care should be before use. Serious damage can occur to the taken to ensure that the fluid is removed from the product and to property if this is not adhered to. garment before placing in the machine. � Never pull the power supply cable to remove the See relevant section in the user manual. plug from the socket; always take hold of the plug � After having installed the appliance, check that it is not sta
Summary of the content on the page No. 4
Product description 1 Dispenser detergent drawer 2 2 Control panel 1 3 Drain hose 3 4 Door 5 Main plug 5 6 Plinth 4 7 Filter cover 8 Adjustable feet 6 7 8 Detergent dispenser Back cabinet drawer Quick Guide Accessories 1. Install the washing machine 2. Load the laundry 3. Measure out the detergent Transport hole Drain hose 4. Close the door plugs support 5. Install the drain and inlet hoses 6. Turn on the water tap 7. Plug the power supply 8. Select the desired programme Inlet hose 9. Press th
Summary of the content on the page No. 5
ZANUSSI ZANUSSI Compartment for liquid additives (fabric Detergent dispenser drawer softener, starch). Compartment for detergent used for prewash and Follow the product manufacturer’s soak phase or for stain remover used during the stain recommendations on quantities to use and do not action phase (if available). The prewash and soak exceed the «MAX» mark in the detergent dispenser detergent is added at the beginning of the wash drawer. Any fabric softener or starching additives programme. The s
Summary of the content on the page No. 6
Washing phases The washing phase running is indicated by the corresponding blinking led. 4 «Start/Pause» button, has the start and pause function. When this button is pressed continuously, this machine is switched between start and pause. 5 ZWF1000M 1 2 3 4 5 6 Child Lock Programme selector dial So your clothes have a more efficient and clean wash different wash cycles can be selected 1 depending on the users needs. SPIN SPEED button By pressing this button you can change the spin speed of the s
Summary of the content on the page No. 7
ZANUSSI Select the Prewash option to perform a prewash cycle before the main wash phase. The washing time will be prolonged. Available for cotton programmes. 4 Washing phases 5 The washing phase running is indicated by the corresponding blinking led. «Start/Pause» button, has the start and pause function. When this button is pressed 6 continuously, this machine is switched between start and pause. 7
Summary of the content on the page No. 8
Washing Programmes 180M 1000M !Energy test program: Cotton 60 intensive !Standard Wool program: 40 ! Compulsory ! Optional !The parameter in this table are only for user’s reference 8
Summary of the content on the page No. 9
ZANUSSI Helpful hints and tips Sorting out the laundry Ink: depending on the type of ink, moisten the fabric Follow the wash code symbols on each garment label first with acetone*, then with acetic acid; treat any and the manufacturer’s washing instructions. Sort the residual marks on white fabrics with bleach and then laundry as follows: whites, coloureds, synthetics, rinse thoroughly. delicates, woollens. Tar stains: first treat with stain remover, methylated Before loading the laundry spirits
Summary of the content on the page No. 10
Degrees of water hardness Water hardness is classified in so-called «degrees» of hardness. Information on hardness of the water in your area can be obtained from the relevant water supply company, or from your local authority. When the degree of hardness is soft, re-adjust the quantity of the detergent. First Use � Ensure that the electrical and water connections � Run a cotton cycle at the highest temperature comply with the installation instructions. without any laundry in the machine, to remo
Summary of the content on the page No. 11
ZANUSSI Daily Use Load the laundry Select the available options by pressing button 2 Open the door by for the model ZWF180M and buttons 3 for model carefully pulling the door the ZWF1000M handle outwards. Place When this button is pressed, the corresponding pilot the laundry in the drum, light illuminates. When it is pressed again, the pilot one item at a time, light goes out. shaking them out as much Select the Prewash option by pressing button 3 as possible. Close the for the model ZWF180M and
Summary of the content on the page No. 12
Cancelling a programme Turn the selector dial toO to cancel a programme which is running, and wait few minutes to open the door (This is only possible if there is no water in the tub). At the end of the programme The machine stops automatically. At the end of the programme, the door is released, after few minutes, and can be opened. Turn the programme selector dial toO to switch the machine off. Remove the laundry from the drum and carefully check that the drum is empty. If you do not intend to
Summary of the content on the page No. 13
ZANUSSI Care and cleaning Warning! You must DISCONNECT the appliance Cleaning the pump from the electricity supply, before you can carry Important! out any cleaning or maintenance work. According to the soil level within the cycles and the frequency of the cycles, you have to inspect and Descaling clean the filter regularly. The water we use normally contains lime. It is a good idea to periodically use a water softening powder in The pump should be inspected if: the machine. � the machine does n
Summary of the content on the page No. 14
If you wash rugs, it is compulsory to inspect and Frost precaution or emergency emptied out clean the filter. If the machine is exposed to temperatures below 0°C or if the water is not discharged, proceed as follows. Cleaning the water inlet filters 1 Pull out the plug from the power socket. Important! 2 Turn off the water tap. If the appliance doesn't fill, takes too long to fill with 3 Unscrew the inlet hose. water, the start button blinks yellow or the display (if 4 Place a bowl on the floor
Summary of the content on the page No. 15
ZANUSSI What to do if..... Certain problems are due to lack of simple Before contacting your local Service Centre, please maintenance or oversights, which can be solved carry out the checks listed below. easily without calling out an engineer. Malfunction Possible Cause / Solution Close the washing machine's door. The washing machine does not work Press the Start/Pause button. Water leakage Correctly connect the inlet water pipe. The spin of the clothes is abnormal Reload and distribute the
Summary of the content on the page No. 16
Possible Cause / Solution Malfunction Check if the amount of detergent is excessive, if it is the specialized detergent for the drum Foam spills from the detergent washing machine. drawer Dip one scoop of the softener mixed with 1/2 liter of water to the detergent box II. Reduce the amount of detergent used next time. The machine stops when the proce- Power failure or water cut. dure has not been finished The water inside the inner barrel has been drained The drainage pump is noisy during bu
Summary of the content on the page No. 17
Spin Flash Flash Off Flash Flash Off Flash Rinse On Wash Off Off Off Off ZANUSSI Alarm codes If the washing machine cannot work normally, a alarm code will appear on the display. Please carry out the following checks. Status of Corresponding Indicators Alarm Solution Description Reason Code Door is not closed properly. Restart after the door is closed Door lock problem Please call the service number if you experience any problems. Open the tap or wait till Tap is not opened or water the water s
Summary of the content on the page No. 18
ZANUSSI If you are unable to identify or solve the problem, contact our service centre. Before telephoning, make a note of the product number, model, serial number and purchase date of your machine. The Service Centre will require this information. Technical data ZWF1000M ZWF180M 520 520 60kg 60kg 2100W 2100W 5 7 10
Summary of the content on the page No. 19
Installation Accurate levelling prevents vibration, noise and Unpacking displacement of the machine during operation. Never All transit bolts and packing must be removed before place cardboard, wood or similar materials under the using the appliance. machine to compensate for any unevenness in the You are advised to keep all transit devices so that floor. they can be refitted if the machine ever has to be transported again. Unscrew the four bolts using a spanner. Slide out the relevant plastic s
Summary of the content on the page No. 20
ZANUSSI Caution! The inlet hose must not be lengthened. If it is too short and you do not wish to move the tap, you will have to purchase a new, longer hose specially designed for this type of use. Water drainage The end of the drain hose can be positioned in three ways: In a sink drain pipe branch. Hooked over the edge This branch must be above the trap so that the bend of a sink using the is at least 60 cm above the ground. plastic hose guide supplied with the Caution! This must be secured wit