Brady Worldwide Identification Solutions user manual

Summary of the content on the page No. 1

DSP-5
Brady Worldwide Identification Solutions
6555 West Good Hope Road
P.O. Box 2131
Milwaukee, WI 53201-2131
Phone: (800) 537-8791
Fax: (800) 292-2289
www.bradyid.com
05/01
instructions

Summary of the content on the page No. 2

CONTENTS EXPLODED VIEW Read this user’s manual before use to ensure proper operation. Keep the manual on hand for reference in case there is a problem. Warranty Information .....................2 Features .........................................3 Notes ............................................3 Repair Policy ..................................3 Specifications .................................3 Set-up ............................................4 Operation/Adjustments ...................5 Main

Summary of the content on the page No. 3

SET-UP INSTRUCTIONS ADJUSTMENTS Hold Down Brush: Using 5/32" (4mm) hex wrench, adjust reel holder arm to vertical. Using the upper thumbscrew on the side of the machine, adjust the hold down brush for Place the label roll on the 1" (25mm) reel hanger bar. tensioning. *If roll has 3" (76.2mm) core, use plastic spool* For best results, labels should be pressed firmly against the strip plate. If labels are held Slide “O” ring onto reel hanger bar to hold roll against reel holder arm to ensure it is

Summary of the content on the page No. 4

MAINTENANCE FEATURES Turn machine off when not in use. Remove liner material from take-up hub at • Will dispense butt-cut and die-cut material. approximately 3" in diameter or if motor appears to be straining. Do not operate • Adjustable photosensor for pinpoint accuracy. machine without covers in place. Do not operate if inspection reveals a damaged • Handled lock rod makes scrap removal easy. power or sensor cord. • No tools required for adjustment. LEGEND NOTES Model DSP-5 • Keep strip plate