Cornelius P/N 620043511 user manual

Summary of the content on the page No. 1

IMI CORNELIUS REMCOR INC g 500 REGENCY DRIVE g GLENDALE HEIGHTS, IL 60139--2268
Telephone (800) 551--4423 Facsimile (800) 519--4423
INSTALLATION INSTRUCTIONS
ED/DF 150--8 “K” STYLE LID KITS, P/N 629087910 AND 629087911
These “K” style kits apply to the following ice makers:
Ice Maker Width
Manitowoc Q320 and Q420 22I
Table 1. Loose-Shipped Parts
Item
No. Part No. Name Qty.
1 620043511 Cover, Gray (629087911) 1
620043512 Cover, Black - (629087910) 1
2 620046012 Lid Assembly 1
3 22127 Bracket 2
4

Summary of the content on the page No. 2

4. Set ice maker lid on the top of the dispenser. 5. Using the slotted holes in the lid as a template, drill four (4) .140I diameter (9/64I) holes at the bot- tom of the slots (see detail A). Use extreme care not to drill into the hopper. Fasten the lid to the dis- penser with four (4) #8 sheet metal screws, two on each side. 6. Seal the ice maker to the top of the dispenser as follows: A. Run beads of RTV around the opening in the lid and inside of the perimeter of the ice maker outline so that

Summary of the content on the page No. 3

ICEMAKER SEAL ICEMAKER TO ITEM 2 WITH ITEM 5 (RTV) 8 PLACES 4 3 4 PLACES 6 4 VIEW ”A” ENLARGED 2 1 DRILL 9/64 (.140) DIA VIEW A HOLES USING BOTTOM OF SLOTTED HOLES AS A TEMPLATE. FIGURE 1. ED/DF 150--8 3 620919518

Summary of the content on the page No. 4

2 PLACES 8 2 PLACES 11 2 PLACES 9 8 11 9 10 10 FIGURE 2. ED/DF 150--8 620919518 4