Summary of the content on the page No. 1
EN
User manual 2
Washing machine
ZWH 6105
Summary of the content on the page No. 2
Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 11 Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 13 Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 What to do if ... _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 15 Washing Programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 7 Technical data _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 18 Helpful hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 9
Summary of the content on the page No. 3
• Always be sure, that there is no water leakage from Child safety hoses and their connections after the installation. • This appliance is not intended for use by person (in- • If the appliance is installed in a location subject to frost, cluding children) with reduced physical sensory or please read the “dangers of freezing” chapter. mental capabilities or lack of experience and knowl- edge unless they have been given supervision or in- • Any plumbing work required to install this appliance sho
Summary of the content on the page No. 4
Product description 1 Detergent dispenser drawer 1 2 2 Control panel 3 Door opening handle 4 Rating plate 5 Drain pump 6 Adjustable feet 3 4 5 6 Detergent dispenser drawer Compartment for detergent used for prewash and soak phase or for stain remover used during the stain action phase (if available). The prewash and soak deter- gent is added at the beginning of the wash programme. The stain remover is added during the stain action phase. Compartment for powder or liquid detergent used for main
Summary of the content on the page No. 5
10 9 1 2 3 4 5 6 7 8 1 Programme selector dial 6 EXTRA RINSE button 2 SPIN reduction button 7 START/PAUSE button 3 OPTION button 8 DELAY START button 4 PREWASH button 9 DOOR LOCKED pilot light 5 EASY IRON button 10 Display Symbols on the Control Panel Programme selector dial = Cotton = Wool = Cold = Jeans = Synthetics = Soak = Delicates = Rinses = Special = Drain = Handwash = Spin Push buttons and pilot lights = Spin reduction button = Easy Iron = Rinse hold = Extra Rinse = Options button = Chil
Summary of the content on the page No. 6
Programme selector dial, spin speed button and available options Programme Selector Dial Start Pause It allows you to switch the appliance on/off and/or to select This button allows you to start or to interrupt the selected a programme. programme. Spin Reduction Delay Start By pressing this button you can change the spin speed of The programme can be delayed from 30 min - 60 min - the selected programme. 90 min, 2 hours and then by 1 hour up to a maximum of 20 hours by means of this button. Avai
Summary of the content on the page No. 7
• Delayed start • Incorrect option selection The Selected delay set by pressing the relevant button If an option which is not compatible with the set wash appears on the display for a few seconds, then the du- programme is selected, the message Err is displayed ration of the selected programme is displayed again. at the bottom of the display for a few seconds and the The delay time value decreases by one unit every hour integrated red light of button 7 start flashing. and then, when 1 hour remai
Summary of the content on the page No. 8
Programme Maximum and Minimum Temperature - Cycle Description - Detergent Compart- Options Maximum Spin Speed - Maximum Fabrics Load - Type of ment Laundry WOOL SPIN REDUCTION 40° RINSE HOLD Main wash - Rinses Maximum spin speed at 1000 rpm Max. load 2 kg Washing programme for machine washable wool as well as for hand washable woollens and delicate fabrics. Note : A single or bulky item may cause imbalance. If the appliance doesn’t perform the final spin phase, add more items, redistribute the l
Summary of the content on the page No. 9
Programme Maximum and Minimum Temperature - Cycle Description - Detergent Compart- Options Maximum Spin Speed - Maximum Fabrics Load - Type of ment Laundry RINSES SPIN REDUCTION Rinses RINSE HOLD Maximum spin speed at 1000 rpm EASY IRON Max. load 7 kg EXTRA RINSE With this programme it is possible to rinse and spin cotton garments which have been washed by hand. The machine per- forms 3 rinses, followed by a final long spin. The spin speed can be reduced. DRAIN Draining of water Max. load 7 kg
Summary of the content on the page No. 10
The choice of detergent will depend on the type of fabric Removing stains (delicates, woollens, cottons, etc.), the colour, washing Stubborn stains may not be removed by just water and temperature and degree of soiling. detergent. It is therefore advisable to treat them prior to All commonly available washing machine detergents may washing. be used in this appliance: Blood: treat fresh stains with cold water. For dried stains, • powder detergents for all types of fabric soak overnight in water w
Summary of the content on the page No. 11
• Remove the polystyrene block and any material from ECO valve. Then run a cotton cycle at the highest tem- the drum. perature without any laundry in the machine, to remove any manufacturing residue from the drum and tub. • Pour 2 liters of water into the main wash compartment Pour 1/2 a measure of detergent into the main wash of the detergent drawer in order to activate the compartment and start the machine. Personalisation Acoustic signals damage to the appliance. This function remains enable
Summary of the content on the page No. 12
Selecting the delay start : Important! If you turn the programme selector dial to another programme when the machine is working, the red 1. Select the programme and the required options. pilot light of button 7 will blink 3 times and the message 2. Select the delay start by pressing button 8 . Err is displayed to indicate a wrong selection. The 3. Press button 7 : machine will not perform the new selected programme. - the machine starts its hourly countdown. - the programme will start after the
Summary of the content on the page No. 13
If the pilot light 9 blinks and after a few minutes goes off, 1. Turn the programme selector dial to . the door can be opened. 2. Select the draining or spinning programme. If the pilot light 9 remains lit, this means that the machine 3. Reduce the spin speed if needed, by pressing the is already heating or that the water level is too high. In relevant button. any case, do not try to force the door! 4. Press button 7 . If you cannot open the door but you need to open it, you At the end of the p
Summary of the content on the page No. 14
Cleaning the drawer recess Remove any objects from the pump impeller by ro- Having removed the draw- tating it. er, use a small brush to Put the cap back on the clean the recess, ensuring emergency emptying hose that all washing powder and place the latter back in residue is removed from its seat. the upper and lower part of the recess. Screw the pump cover fully in. Replace the drawer and run the rinse programme with- Close the pump door. out any clothes in the drum. Cleaning the pump The pump
Summary of the content on the page No. 15
• Screw the water inlet hose back on and reposition the emergency emptying hose after having put the cap on again. • When you intend to start the machine up again, make sure that the room temperature is above 0°C. Emergency emptying out If the water is not discharged, proceed as follows to empty out the machine: • Unscrew the hose from the machine. Keep a rug • pull out the plug from the power socket; nearby because some water may flow. • close the water tap; • Clean the filter in the valve with
Summary of the content on the page No. 16
Problem Possible cause/Solution The door has not been closed. • Close the door firmly. The plug is not properly inserted in the power socket. • Insert the plug into the power socket. There is no power at the socket. • Please check your domestic electrical installation. The main fuse has blown. The machine does not start: • Replace the fuse. The selector dial is not correctly positioned and the button 7 has not been pressed. • Please turn the selector dial and press the button 7 again. The delay
Summary of the content on the page No. 17
Problem Possible cause/Solution Too much detergent or unsuitable detergent (creates too much foam) has been used. • Reduce the detergent quantity or use another one. Check whether there are any leaks from one of the inlet hose fittings. It is not always easy to see this as the water runs down the hose; check to see if it is damp. There is water on the floor: • Check the water inlet hose connection. The drain or inlet hose is damaged. • Replace it with a new one. The cap on the emergency emptying
Summary of the content on the page No. 18
Problem Possible cause/Solution The electronic unbalance detection device has cut in because the laundry is not evenly distributed in the drum. The laundry is redistributed by reverse rotation of the drum. This may happen several times before the unbalance disappears and normal spinning can resume. If, after 10 minutes, the laundry is still not evenly distributed in the drum, the machine will not spin. In this Spinning starts late or the machine case, redistribute the load manually and select th
Summary of the content on the page No. 19
Consumption values Programme Energy consumption Water consumption (litres) Programme duration (Mi- (KWh) nutes) White Cottons 90° 2.1 65 Cottons 60° 1.4 60 Cottons + ECONOMY 60° 1.19 59 For the duration of the pro- 1) grammes, please refer to the display on the control Cottons 40° 0.77 60 panel. Synthetics 40° 0.6 54 Delicates 40° 0.6 63 Wool/ Handwash 30° 0.25 55 1) «Cottons + Economy» at 60°C with a load of 7 kg is the reference programme for the data entered in the energy label, in compliance
Summary of the content on the page No. 20
Positioning Install the machine on a flat hard floor. Make sure that air circulation around the machine is not impeded by carpets, rugs etc. Check that the machine does not touch the wall or other kitchen units. Level the washing machine by 35° 45° raising or lowering the feet. The feet may be tight to adjust as they incorporate a self locking nut, but the machine MUST be level and stable. Any necessary adjustment can be made with a spanner. The other end of the inlet hose which connects to the
