Summary of the content on the page No. 1
LBS66-1
Washing Machine
Summary of the content on the page No. 2
Safety instructions 1 Warnings • This appliance must be connected to General Safety an earthed outlet protected by a fuse of • Never place your machine on a carpet suitable capacity. covered floor. Otherwise, lack of airflow • The supply and draining hoses must from below of your machine may cause always be securely fastened and remain in electrical parts to overheat. This may cause an undamaged state. problems with your washing machine. • Fit the draining hose to a washbasin or •
Summary of the content on the page No. 3
2 Installation Removing packaging reinforcement Tilt the machine to remove the packaging reinforcement. Remove the packaging reinforcement by pulling the ribbon. • If you are going to use your double water- Opening the transportation locks inlet machine as a single (cold) water-inlet A Transportation safety bolts must be unit, you must install the stopper*, supplied removed before operating the washing with your machine to the hot water valve. machine! Otherwise, the machine will be •
Summary of the content on the page No. 4
Electrical connection Loading door Connect the machine to an earthed outlet The door locks during program operation and protected by a fuse of suitable capacity. the Door Locked Symbol (Figure 3-13i) lights Important: up. The door can be opened when the symbol • Connection should comply with national fades out. regulations. • The voltage and the allowed fuse Detergents and softeners protection are specified in the section Detergent Drawer “Technical Specifications”. The detergent draw
Summary of the content on the page No. 5
4 Selecting a Program and Operating Your Machine Control panel 5 3 Cotone Avvio/ Prelavaggio Extra Esclusione Sintetici Intensivo Pausa Risciacquo Centrifuga Freddo 30° Intensivo + Quotidiano On/Off 40° Lana Misti 50° 90° Lavaggio a Delicati Mano 80° 60° 70° Risciaquo Scarico Inizio Lavaggio Centrifuga Centrifuga 6 4 7 8 1 - Spin Speed Adjustment Knob * 7 - On/Off Button 2 - Time Delay Button * 8 - Program Follow-up Indicators * 3 - Temperature Adjustment Knob * 9 - Child-proof
Summary of the content on the page No. 6
shorter washing cycle is used compared to or starch separately. the “Cottons” program. It is recommended for • Spin your synthetic clothes (such as shirts, blouses, This program spins with maximum possible synthetic/cotton blended garments, etc.). For rpm in the default setting. curtains and lace, the “Synthetic 40” program You should use a lower spin speed for C with pre-wash and anti-creasing functions delicate laundries. selected is recommended. • Pump •Delicates This program is use
Summary of the content on the page No. 7
Program selection and consumption table Programme Cottons 90 6 150 55 2.00 • • • • • • • Cottons 60** 6 140 49 1.14 • • • • • • Cottons 40 6 125 49 0.70 • • • • • • • Intensive 60 6 160 65 1.30 • • • • Babycare 60 6 170 65 1.40 * • • • Intensive+ Synthetics 60 3 115 55 0.90 • • • • • • • Synthetics 40 3 105 55 0.50 • • • • • • • Mix 40 3.5 95 55 0.50 • • • • • • • Delicate 40 2 70 60 0.35 • • • • • Woollens 40 1.5 55 55 0.30 • • • • Hand wash 30 1 40 35 0.15 • • Mini 30 3 30 50 0.25 • • • : Sele
Summary of the content on the page No. 8
at the minimum rpm given on the panel. Auxiliary functions No spin Auxiliary function selection keys You may use this program if you do not want Select the required auxiliary functions before to spin your clothes at the end of cottons, starting the program. synthetics, woolen or delicate programs. Auxiliary function buttons may differ C according to the model of your machine. Time delay If you wish to wash your clothes at a later Auxiliary function selection time in machines equipped with
Summary of the content on the page No. 9
program. Select the “Cottons 40” program. 5 Maintenance and cleaning Start the program. Detergent Drawer Switching the machine to standby Remove any powder residue buildup in the mode drawer. To do this; Press “Start/Pause/Cancel” button 1. Press the dotted point on the siphon in the momentarily to switch your machine to the softener compartment and pull towards standby mode. Auxiliary functions can be you until the compartment is removed from cancelled or selected in accordance with
Summary of the content on the page No. 10
• Place a large container at the end of the Draining any remaining water and hose. Drain the water off into the container cleaning the pump filter by pulling out the plug at the end of the Your product is equipped with a filter system hose. If the amount of water to be drained which ensures a cleaner water discharge that off is greater than the volume of the extends pump life by preventing solid items container, replace the plug, pour the water such as buttons, coins and fabric fiber
Summary of the content on the page No. 11
6 Solution suggestions for problems Problem Cause Explanation / Suggestion Machine may have switched to self Program cannot Reset your machine by pressing “Start/Pause/ protection mode due to be started or Cancel” button for 3 seconds. (see, Canceling an infrastructure problem selected. a Program) (such as line voltage, water pressure, etc.). Be sure the seals of the water inlet hoses are There is water There might be problems securely fitted. coming from with hoses or the pump Tig
Summary of the content on the page No. 12
7 Specifications LBS66-1 Models 6 Maximum dry laundry capacity (kg) 84 Height (cm) 60 Width (cm) Depth (cm) 54 Net Weight (kg) 74 Electricity (V/Hz.) 230 V / 50hz Total Current (A) 10 Total Power (W) 2200 Spinning cycle (rpm max.) 600 Specifications of this appliance may change without notice to improve the quality of the product. Figures in this manual are schematic and may not match your product exactly. Values stated on the machine labels or in the documentation accompanying it are obtained
