Summary of the content on the page No. 2
washing and rinsing of textiles that are 1 Warnings marked accordingly. General Safety Safety instructions • Never place your machine on a carpet • This appliance must be connected to covered floor. Otherwise, lack of airflow an earthed outlet protected by a fuse of from below of your machine may cause suitable capacity. electrical parts to overheat. This may cause • The supply and draining hoses must problems with your washing machine. always be securely fastened and remain in •
Summary of the content on the page No. 3
2 Installation Removing packaging reinforcement Tilt the machine to remove the packaging reinforcement. Remove the packaging reinforcement by pulling the ribbon. the machine to the water intake valves on the machine. Opening the transportation locks • If you are going to use your double water- A Transportation safety bolts must be inlet machine as a single (cold) water-inlet removed before operating the washing unit, you must install the stopper*, supplied machine! Otherwise, the mac
Summary of the content on the page No. 4
overloaded. Electrical connection Loading door Connect the machine to an earthed outlet The door locks during program operation and protected by a fuse of suitable capacity. the Door Locked Symbol (Figure 3-13i) lights Important: up. The door can be opened when the symbol • Connection should comply with national fades out. regulations. • The voltage and the allowed fuse Detergents and softeners protection are specified in the section Detergent Drawer “Technical Specifications”. The de
Summary of the content on the page No. 5
4 Selecting a Program and Operating Your Machine Control panel 5 6 3 7 4 8 1 - Spin Speed Adjustment Knob * 7 - On/Off Button 2 - Time Delay Button * 8 - Program Follow-up Indicators * 3 - Temperature Adjustment Knob * 9 - Child-proof Lock Indicator * 4 - Start/Pause/Cancel Button 5 - Auxiliary Function Keys * According to your machine’s model 6 - Program Selection Knob Turning the machine on Normally soiled, fade proof You can prepare the machine for program colored linens, cottons
Summary of the content on the page No. 6
and a shorter washing cycle is used compared or starch separately. to the “Cottons” program. It is recommended • Spin for your synthetic clothes (such as shirts, This program spins with maximum possible blouses, synthetic/cotton blended garments, rpm in the default setting. etc.). For curtains and lace, the “Synthetic C You should use a lower spin speed for 40” program with pre-wash and anti-creasing delicate laundries. functions selected is recommended. • Pump •Delicates This program
Summary of the content on the page No. 7
Program selection and consumption table Programme Cottons 90 5 150 50 1.70 • • • • • • • 49 Cottons 60** 5 120 43 0.95 • • • • • • • Cottons 40 5 120 45 0.65 • • • • • • • Intensive 60 5 160 55 1.00 • • • • Intensive+ Babycare 60 5 170 60 1.00 * • • • Synthetics 60 2.5 115 50 0.95 • • • • • • • Synthetics 40 2.5 100 50 0.50 • • • • • • • Mix 40 3.5 95 45 0.50 • • • • • • • Delicate 40 2 70 55 0.35 • • • • • Woollens 40 1.5 55 45 0.30 • • • • Hand wash 30 1 40 35 0.15 • • Quick Mini 30 2.5 30 45
Summary of the content on the page No. 8
reduction button is pressed, spin speed will be Auxiliary functions at the minimum rpm given on the panel. Auxiliary function selection keys No spin Select the required auxiliary functions before You may use this program if you do not want starting the program. to spin your clothes at the end of cottons, C Auxiliary function buttons may differ synthetics, woolen or delicate programs. according to the model of your machine. Time delay Auxiliary function selection If you wish to wash your c
Summary of the content on the page No. 9
For example, press and hold the “Start/Pause/ 5 Maintenance and cleaning Cancel” button for 3 seconds in order to select “Cottons 40” program instead of “Cottons 60” Detergent Drawer program. Select the “Cottons 40” program. Remove any powder residue buildup in the Start the program. drawer. To do this; 1. Press the dotted point on the siphon in the Switching the machine to standby softener compartment and pull towards mode you until the compartment is removed from Press “Start/Pause/Ca
Summary of the content on the page No. 10
• Place a large container at the end of the Draining any remaining water and hose. Drain the water off into the container cleaning the pump filter by pulling out the plug at the end of the Your product is equipped with a filter system hose. If the amount of water to be drained which ensures a cleaner water discharge that off is greater than the volume of the extends pump life by preventing solid items container, replace the plug, pour the water such as buttons, coins and fabric fiber
Summary of the content on the page No. 11
6 Solution suggestions for problems Problem Cause Explanation / Suggestion Machine may have switched to self Program cannot Reset your machine by pressing “Start/Pause/ protection mode due to be started or Cancel” button for 3 seconds. (see, Canceling an infrastructure problem selected. a Program) (such as line voltage, water pressure, etc.). Be sure the seals of the water inlet hoses are There is water There might be problems securely fitted. coming from with hoses or the pump Tig
Summary of the content on the page No. 12
7 Specifications Models LBS645-5 Maximum dry laundry capacity (kg) 5 Height (cm) 84 Width (cm) 60 Depth (cm) 45 Net Weight (kg) 60 Electricity (V/Hz.) 230 V / 50hz Total Current (A) 10 Total Power (W) 2200 Spinning cycle (rpm max.) 600 Specifications of this appliance may change without notice to improve the quality of the product. Figures in this manual are schematic and may not match your product exactly. Values stated on the machine labels or in the documentation accompanying it are obtaine
Summary of the content on the page No. 1
LBS645-5
Washing Machine
Lavatrice
