Summary of the content on the page No. 1
WF8802JS(A/F/G/H/S/V/W/Z)
WF8800JS(A/F/G/H/S/V/W/Z)
WF8702JS(A/F/G/H/S/V/W/Z)
WF8700JS(A/F/G/H/S/V/W/Z)
WF8802ES(A/F/G/H/S/V/W/Z)
WF8800ES(A/F/G/H/S/V/W/Z)
WF8702ES(A/F/G/H/S/V/W/Z)
WF8700ES(A/F/G/H/S/V/W/Z)
WF8802RS(A/F/G/H/S/V/W/Z)
WF8800RS(A/F/G/H/S/V/W/Z)
WF8702RS(A/F/G/H/S/V/W/Z)
WF8700RS(A/F/G/H/S/V/W/Z)
Washing Machine
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive a more complete service, please
register your product at
www.samsung.com/re
Summary of the content on the page No. 2
features of your new samsung washing machine Your new washing machine will change the way you feel about doing laundry. From its super-size capacity to its energy efficiency, the Samsung washing machine has all the features to turn a mundane chore into a pleasure. • Water Saving Designed to address concerns on water consumption. Less water is used per wash, while continuing to deliver a clean and effective washing performance. It has been certified from WELS(Water Efficiency Labelling and Stan
Summary of the content on the page No. 3
• Air Refresh (selected models) Refresh your favorite clothes simply with air after you’ve been out at a party or have simply been out (food, cigarettes). Non-stained clothing does not need to be washed, simply refresh it. 3 different cycles are available for various kinds of fabrics. • Wide door Extra wide door aperture for convenient viewing! Easily add and remove laundry, especially for large sized laundry items such as bedding, towels etc. This manual contains important information on the
Summary of the content on the page No. 4
safety information Throughout this manual, you’ll see Warning and Caution notes. These warnings, cautions, and the important safety instructions that follow do not cover all possible conditions and situations that may occur. It’s your responsibility to use common sense, caution, and care when installing, maintaining, and operating your washing machine. Samsung is not liable for damages resulting from improper use. IMPORTANT SAFETY SYMBOLS AND PRECAUTIONS What the icons and signs in this us
Summary of the content on the page No. 5
To reduce the risk of fire or explosion: CAUTION • Do not wash items that have been washed, soaked, or treated with gasoline, dry cleaning solvents, or other flammable or explosive substances. They give off vapors that could ignite or explode. Rinse by hand any material that has been exposed to cleaning solvent or other flammable liquids or solids before putting in your washing machine. Be sure that all traces of such liquids, solids, and fumes have been removed. Dangerous substances include a
Summary of the content on the page No. 6
safety information The appliance is designed for home use only. Make sure that water and electrical connections are made by qualified technicians, observing the manufacturer’s instructions (see “Installing the Washing Machine”) and local WARNING safety regulations. Before cleaning or carrying out maintenance, unplug the appliance from the electrical outlet. Always unplug the appliance and turn off the water after use. Make sure that the pockets of all clothing to be washed are empty. Hard, shar
Summary of the content on the page No. 7
A stainless washing tub does not usually rust. However if some metal such as a hair pin is left in the tub for an extended time, the tub could rust. • Do not leave water or bleach containing chlorine in the tub for an extended period of time. • Do not regularly use or leave water containing iron in the tub for an extended period of time. If rust starts appearing on the surface of the tub, apply a cleansing agent (neutral) to the surface and use a sponge or soft cloth to clean it. (Under no c
Summary of the content on the page No. 8
contents 9 Checking the parts SETTING UP YOUR WASHING 10 Meeting installation requirements MACHINE 10 Electrical supply and grounding 10 Water Supply 9 11 Drain 11 Flooring 11 Surrounding temperature 11 Alcove or closet installation 11 Installing your washing machin e 16 Envir onment 17 W ashing for the first time WASHING A LOAD OF LAUNDRY 17 Basic instructions 18 Using the control panel 17 20 Child lock 20 Sound off 20 Delay end 21 Air Refresh 22 Washing clothes using the cycle selector 2
Summary of the content on the page No. 9
01 SETTING UP setting up your washing machine Be sure to have your installer follow these instructions closely so that your new washing machine works properly and so that you’re not at risk of injury when doing laundry. CHECKING THE PARTS Carefully unpack your washing machine, and make sure you’ve received all of the parts shown below. If your washing machine was damaged during shipping, or if you do not have all of the parts, contact Samsung Customer Service or your Samsung dealer. Release
Summary of the content on the page No. 10
setting up your washing machine MEETING INSTALLATION REQUIREMENTS Electrical supply and grounding To prevent unnecessary risk of fire, electrical shock, or personal injury, all wiring and grounding must be done in accordance with the National Electrical Code ANSI/FNPA, No. 70 Latest Revision and local codes and ordinances. It is the personal responsibility of the appliance owner to provide adequate electrical service for this appliance. Never use an extension cord. WARNING Use only the power
Summary of the content on the page No. 11
01 SETTING UP Drain Samsung recommends a standpipe height of 18 in (46 cm). The drain hose must be routed through the drain hose clip to the standpipe. The standpipe must be large enough to accept the outside diameter of the drain hose. The drain hose is attached at the factory. Flooring For best performance, your washing machine must be installed on a solidly constructed floor. Wood floors may need to be reinforced to minimize vibration and/or unbalanced loads. Carpeting and soft tile surface
Summary of the content on the page No. 12
setting up your washing machine STEP 2 Removing the shipping bolts Before installing the washing machine, you must remove the five shipping bolts from the back of the unit. 1. Loosen all the bolts with the supplied wrench. 2. Hold the bolt with the spanner and pull it through the wide section of the hole. Repeat for each bolt. 3. Fill the holes with the supplied plastic covers. 4. Store the shipping bolts away safely in case you have to move the washing machine in the future. Packaging materi
Summary of the content on the page No. 13
01 SETTING UP STEP 3 Adjusting the levelling feet When installing your washing machine, ensure that the power plug, the water supply and the drain are easily accessible. 1. Slide the washing machine into position. 2. Level your washing machine by turning the leveling feet in and out as necessary by hand. 3. When your washing machine is level, tighten the nuts using the wrench supplied with your washing machine. STEP 4 Connecting the water and drain Connecting the water supply hose 1. Take
Summary of the content on the page No. 14
setting up your washing machine Connecting the water supply hose (selected models) 1. Remove the adaptor from the water supply hose. Adoptor Water supply hose 2. First, using a ‘+’ type screwdriver, loosen the four screws on the adaptor. Next, take the adaptor and turn part (2) 1 5 mm following the arrow until there is a 5 mm gap. 2 3. Connect the adaptor to the water tap by tightening the screws firmly. Turn part (2) following the arrow and connect (1) and (2). 1 2 4. Connect the water su
Summary of the content on the page No. 15
01 SETTING UP 6. Turn on the water supply and ensure that no water leaks from the water valve, tap or adaptor. If there is a water leaks, repeat the previous steps. ✗ Do not use your washing machine if there is a water leak. WARNING This may cause electric shock or injury. ✗ • If the water tap has a screw type tap, connect the water supply hose to the tap as shown. Use the most conventional type of tap for the water supply. In case the tap is square or too big, remove the spacing ring befor
Summary of the content on the page No. 16
setting up your washing machine Connecting the drain hose The end of the drain hose can be positioned in three ways: 1. Over the edge of a wash basin: The drain hose must be placed at a height of between 60 and 90 cm. To keep the drain hose spout bent, use the supplied plastic hose guide. Secure the guide to the wall with a hook or to the tap with a piece of string to prevent the drain hose from moving. Drain hose Hose guide 2. ln a sink drain pipe branch: The drain pipe branch must be above
Summary of the content on the page No. 17
02 WASHING A LOAD OF LAUNDRY washing a load of laundry With your new Samsung washing machine, the hardest part of doing laundry will be deciding which load to wash first. WASHING FOR THE FIRST TIME Before washing laundry for the first time, you must run a complete empty cycle (i.e. no laundry). 1. Press the Power button. 2. Add a little detergent to the detergent compartment in the detergent drawer. 3. Turn on the water supply to the washing machine. 4. Press the Start/Pause button. This will r
Summary of the content on the page No. 18
washing a load of laundry USING THE CONTROL PANEL 1 2 6 7 8 9 10 11 12 3 4 5 DIGITAL GRAPHIC Displays the remaining wash cycle time, all cycle information, and error 1 DISPLAY messages. Select the tumble pattern and spin speed for the cycle. For detailed information, refer to “Washing clothes using the cycle selector”. Cotton - For lightly soiled cotton, bed linen, table linen, underwear, towels, shirts, etc. Synthetics - For averagely or lightly soiled blouses, shirts, etc., made of polyest
Summary of the content on the page No. 19
02 WASHING A LOAD OF LAUNDRY PREWASH Press this button to select pre-wash. Pre-wash is only available with: 3 SELECTION BUTTON Cotton, Synthetics, Sports Wear, Daily Wash. Press this button repeatedly to cycle through the available Delay End DELAY END options (from 3 hours to 19 hours in one hour increments). 4 SELECTION BUTTON The hour displayed indicates the time when the wash cycle will be finished. Press this button repeatedly to cycle through the available water TEMPERATURE 5 temperature
Summary of the content on the page No. 20
washing a load of laundry Child lock The Child Lock function allows you to lock the buttons so that the wash cycle you’ve chosen can’t be changed. Activating/Deactivating If you want to activate or deactivate the Child Lock function, press the Temp. and Rinse buttons at the same time for 3 seconds. The “Child Lock ” lamp on the control panel will be lit when this feature is activated. When the Child Lock function is activated, only the Power button works. The Child Lock function remains on
