Summary of the content on the page No. 1
PERFORMANCE SERIES
FRONT-LOADING AUTOMATIC WASHER
USE & CARE GUIDE
LAVEUSE AUTOMATIQUE À CHARGEMENT FRONTAL
GUIDE D’UTILISATION ET D’ENTRETIEN
FOR QUESTIONS ABOUT FEATURES, OPERATION/PERFORMANCE, AU CANADA, POUR ASSISTANCE, INSTALLATION OU SERVICE,
PARTS, ACCESSORIES OR SERVICE CALL: 1.800.688.9900 COMPOSER LE : 1.800.807.6777
IN CANADA, CALL: 1.800.807.6777
VISIT OUR WEBSITE AT WWW.MAYTAG.COM OU VISITER NOTRE SITE INTERNET À
IN CANADA, WWW.MAYTAG.CA WWW.MAYTAG.CA
Certified to Sanitize Designe
Summary of the content on the page No. 2
TABLE OF CONTENTS TABLE DES MATIÈRES WASHER SAFETY ......................................................................................................................3 SÉCURITÉ DE LA LAVEUSE .....................................................................................................27 INSTALLATION REQUIREMENTS.............................................................................................4 EXIGENCES D'INSTALLATION..........................................................
Summary of the content on the page No. 3
WASHER SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.” These words mean: You can be killed or seriously injured if you don't immediately DA
Summary of the content on the page No. 4
INSTALLATION REQUIREMENTS Tools and Parts Gather the required tools and parts before starting installation. The parts supplied are in the Tools needed for connecting the drain hose washer drum. 9 Locking pliers (that open to 1 /16" [39.5 mm]) Tools needed for connecting the water inlet hoses 9 Pliers (that open to 1 /16" [39.5 mm]) Flashlight (optional) 4
Summary of the content on the page No. 5
Tools needed for installation Options Open end wrenches 17 mm and 13 mm Level Pedestal Wood block A pedestal will add to the total height of the washer for a total height of 53.5" (1359 mm). Ruler or measuring tape Parts supplied: AB C F G Optional pedestal DE This pedestal is available in several colors. To order, call the dealer from whom you purchased your washer or refer to the “Assistance A. Drain hose form or Service” section. B. Inlet hose (2) C. Inlet hose washers (4) Pedestal
Summary of the content on the page No. 6
Location Requirements Selecting the proper location for your washer improves performance and minimizes noise and Washer Dimensions possible washer “walk.” 27" 1 52 / " 2 (686 mm) Your washer can be installed under a custom counter, or in a basement, laundry room, closet, (1335 mm) or recessed area. See “Drain System.” Companion appliance location requirements should also be considered. Proper installation is your responsibility. You will need 1 38 / " A water heater set to deliver 120°F (49°
Summary of the content on the page No. 7
Recommended installation spacing for recessed or closet installation, Recommended installation spacing for recessed or closet installation, with or without a pedestal with stacked washer and dryer The dimensions shown are for the recommended spacing. The dimensions shown are for the recommended spacing. Recessed area or closet installation 2 48 in. * 2 (310 cm ) 3"* (76 mm) 3" (76 mm) 2 48 in. * 34" 2 (310 cm ) (864 mm) 2 24 in. * 3" 2 (155 cm ) (76 mm) 3"* (76 mm) 1" 31½" 4" (25
Summary of the content on the page No. 8
Laundry tub drain system (view C) Recommended installation spacing for cabinet installation The laundry tub needs a minimum 20 gal. (76 L) capacity. The top of the laundry tub must be at least 30" (762 mm) above the floor. The dimensions shown are for the recommended spacing. Floor drain system (view D) For cabinet installation, with a door, the minimum ventilation openings in the top are The floor drain system requires a siphon break that may be purchased separately. See “Tools required.
Summary of the content on the page No. 9
This washer is equipped with a power supply cord having a 3 prong grounding plug. To minimize possible shock hazard, the cord must be plugged into a mating, 3 prong, INSTALLATION INSTRUCTIONS grounding-type outlet, grounded in accordance with local codes and ordinances. If a mating outlet is not available, it is the personal responsibility and obligation of the customer to have the properly grounded outlet installed by a qualified electrician. Remove Transport System If codes permit and a
Summary of the content on the page No. 10
9. Turn on the water faucets and check for leaks. Connect the Inlet Hoses NOTE: Replace inlet hoses after 5 years of use to reduce the risk of hose failure. Record hose installation or replacement dates on the hoses for future reference. 1. Insert new flat washers (supplied) into each end of the inlet hoses. Firmly seat the washers in the couplings. 10. Periodically inspect and replace hoses if bulges, kinks, cuts, wear, or leaks are found. Connect the Drain Hose Remove drain hose from washe
Summary of the content on the page No. 11
Laundry tub drain or standpipe drain Level the Washer Connect the drain hose form to the corrugated drain hose. Properly leveling your washer avoids excessive noise and vibration. 1. Check the levelness of the washer by placing a level on the top edge of the washer, first side to side, then front to back. AB A. Snap either end of the drain hose form to the drain hose at the If the washer is against a wall, move the washer out slightly before tipping back. If the point where the corrugation be
Summary of the content on the page No. 12
6. Check for leaks around faucets and inlet hoses. Auto Water Level This washer automatically adjusts water level for optimal cleaning and rinsing performance. Two sensors determine load size, load composition, and suds level, then the sensors adjust WARNING the water level to the proper setting. This eliminates guesswork. The water level is just right for every wash load size. Super Size Capacity Since there is no agitator, you can wash larger, bulkier items such as a king-sized bedspread.
Summary of the content on the page No. 13
Efficient Detergent System Dynamic Off-Balance Detection This washer has a specially designed valve that closes during the wash portion of the cycle This washer uses two sensors to detect load size and the amount of off-balance within the so that 100% of the water and detergent mixture is used on the load. The Efficient Detergent load. The suspension system and controls are specially designed to redistribute the load System ensures that no water or detergent is wasted. automatically. WASHER U
Summary of the content on the page No. 14
Mix large and small items and avoid washing single items. Load evenly. Choosing the Right Detergent Use only High Efficiency detergents. The package for this type of detergent will be marked It is recommended that you wash small items such as infant socks in a mesh garment bag. “HE” or “High Efficiency.” This wash system, along with less water, will create too much When unloading garments, occasionally check under the gray colored seal at the sudsing with a regular non-HE detergent. Using
Summary of the content on the page No. 15
Main wash compartment Chlorine bleach compartment (Letter B in Dispenser Illustration) (Letter D in Dispenser Illustration) 2 Add liquid or powdered HE detergent to this compartment for your wash cycle. The detergent Add no more than /3 cup (160 mL) liquid chlorine bleach to this compartment. The bleach type selector (A) must always be in the correct position for the detergent type used. Slide the will be automatically diluted and dispensed at the best time during the first rinse after the det
Summary of the content on the page No. 16
To change Options or Modifiers after the cycle has started To unlock the controls Select and hold CONTROL LOCK for 3 seconds until the Control Lock status light turns off. 1. Select START/PAUSE once. 2. Select the desired OPTIONS or MODIFIERS. Door Locked 3. Select START/PAUSE (for approximately 1 second) to continue the cycle. When the status light illuminates, the door is locked. To drain the washer manually Estimated time remaining 1. Select START/PAUSE once. The cycle time varies automatic
Summary of the content on the page No. 17
Delicate Drain & Spin Use this cycle to wash no-iron fabrics and garments labeled “Permanent Press” or “Wrinkle Use this cycle to drain your washer or to drain and spin your wash load. The spin speed is Free” or that indicate using a “Gentle” cycle on the care label. This cycle combines low-speed preset to extra high. If desired, you can reduce the spin speed by selecting the speed you want tumbling and low-speed spin to help reduce wrinkling. from the Spin Speed modifier. NOTE: Loads of synth
Summary of the content on the page No. 18
Options Modifiers You can customize your wash by adding options to your cycle selections. You can add or Preset cycle settings of Soil Level (cycle time), Wash Temperature, and Spin Speed can be change an option after starting a cycle anytime before the selected option begins. Not all changed. You can change these settings by using modifiers. Modifiers can be changed before options are available with all cycles. or during the cycle until that part of the cycle starts. Not all modifiers are ava
Summary of the content on the page No. 19
LAUNDRY GUIDE Refer to this chart for suggested load types and their corresponding cycles. Listed to the right are the options available to each of these washer cycles. CYCLE SUGGESTED LOAD TYPE AVAILABLE OPTIONS Signal Delay Extra Fresh Spin Max TM ON/OFF Start Rinse (Fresh Hold) Extract Whitest Whites Heavily soiled white fabrics ✓ ✓ ✓ ✓ ✓ Heavy Duty Heavily soiled underwear, towels, work clothes, shirts, etc. ✓ ✓ ✓ ✓ ✓ Normal/Casual Normally soiled blouses, shirts, overalls, etc., made of p
Summary of the content on the page No. 20
Sorting Loading Separate heavily soiled items from lightly soiled ones, even if they would normally be washed together. Separate lint-givers (towels, chenille) from lint-takers (corduroy, Loading suggestions synthetics, permanent press). When possible, turn lint-givers inside out. Separate dark colors from light colors, colorfast items from non colorfast items. Heavy Work Clothes Sort by fabric and construction (sturdy cottons, knits, delicate items). 4 jeans 2 sweatpants 4 work pants
