Summary of the content on the page No. 1
User's manual
Full Automatic Washing Machine
User's manual
This manual is for
XQB55-10
Please read this manual
carefully before using.
Retain it for future reference.
0030805169C
Summary of the content on the page No. 2
Contents Names of the parts...............................................................................................1 Safety precautions .............................................................................................2 Installation and adjustment ...................................................................................4 Install the water inlet hose....................................................................................6 Preparation before washing ........
Summary of the content on the page No. 3
Names of the parts Top lid A Water valve Water absorption Top lid B cushion Notice label Detergent box Lint filter two Control panel Hanging hole for the drain Filter cover hose Inner tub Handle Pulsator Power cord Adjustable foot Control panel film stick Drain hose ack cover Cabinet Fixed foot (3) Adjustable foot Meaning and description of the symbols Contents marked with that symbol are related to the safety Warning sign of the product and the personal safety of the users. Please op
Summary of the content on the page No. 4
Safety precautions Please plug the plug on special receptacle The power cord plug should be convenient to be pluged in or pluged out with hand with rated voltage. Be sure to use single- while the washing machine runs normally. phase three pins receptacle. Ensure the Be sure to pull the plug out and close the earthing prong of the power receptacle is water tap when the machine is idle, when earthed reliably. Use leakage protector if moving the machine, or when cleaning possible. the machine
Summary of the content on the page No. 5
Safety precautions Do not stretch hands into the working Do not decompose, repair or alter the machine. It is dangerous even if the machine by yourself. rotation is slow. Take special care of the children. Do not let the children climb the washing machine. Do not put any hot or heavy items (such Do not wash laundries with volatile as the kettle with hot water ) on the materials (such as thinner, petrol etc.) washing machine. The handicapped or children without Keep the mac
Summary of the content on the page No. 6
Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Install the lint filter Install the bottom plate After you open the package, please lean the washing machine gently down on soft Push the lint filter downward to location for lint filter. items ( like the towel cloth, blanket, etc. ). Install the bottom plate to the bottom of the machine with the seven scr
Summary of the content on the page No. 7
How to change the direction of the drain hose 1.Dismantle the back cover of the washing 3.Dismantle the protecting cover of the machine. drain outlet at the other side (method 2.Put down the drain hose. Take off the the same as the bushing). Install the drain hose frame. As indicated in Figure bushing as per indicated in Figure 4. 1, put the drain hose into the cabinet. 4.Extend the drain hose from the other Then stretch one hand into the cabinet side. Fix the drain hose onto the b
Summary of the content on the page No. 8
Install the water inlet hose Confirm the water tap Water tap,not suitable Water tap,suitable Outlet end surface >10mm It is required that the front end shall be longer than 10mm. The outlet end surface of the tap shall be flat and smooth. If not please file it to avoid leakage. Connection between the water inlet hose jointer and the water tap 1.Press the lower end of the lock lever and push down the slider. Take off the water inlet hose jointer from the water inlet hose component. See to Fig
Summary of the content on the page No. 9
Connection between the water inlet hose and the washing machine 1.Do not take off the water absorption Nut of the water inlet hose cushion. Please check if the cushion is dropped or damaged before each usage. If it happens please contact our after-sale department immediately. 2.Put the nut of the water inlet hose on the valve jointer. 3.Fasten the nut. Swaying it gently to Water absorption cushion confirm if it's suitable. Jointer of the water inlet valve Connection between
Summary of the content on the page No. 10
Preparation before washing Preparation before washing 1.Connect the water inlet hose and open the water tap . 2.Confirm that the washing machine is earthed reliably . Then insert the power plug into the receptacle. Do not connect the earth ter- minal to the gas pipe and tap water pipe. 3.Put down the drain hose. 4.Slanting or uneven ground may result in unstable working or abnormal noise. Please make the machine stand horizontally. Pay attention to followings before wa
Summary of the content on the page No. 11
Put in the laundries The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition that can be washed or spinned in one time. One time washing quantity shall be lower than the rated capacity. The thickness, size, type of the cloth will inf- luence the actual washing capacity. It is sui- table for one time washing to put in reasona- ble amount of laundries and the laundries can be turned round in washing. To wash thin laundries l
Summary of the content on the page No. 12
Use the operation buttons a. Description of the function of the buttons SURPLUS(MIN) "POWER ON/OFF"button To indicate -- during sensing. Press "Power On/Off" button to connect To indicate remaining min. During power supply. After power is connected, pressing this program running. button will cut off the supply. To indicate remaining reserved time (hrs) during reservation period. To indicate fault symbols for abnormal "START/PAUSE"button conditions (see page 15) Page 15 After the power is switc
Summary of the content on the page No. 13
b. Operating procedure and explanations for the buttons PROGRAM STATUS PROCEDURE STATUS STANDARD SOAK JEANS WASH GENTLE RINSE QUICK WASH SPIN WASH POWER START ON/OFF SPIN PAUSE PROGRAM RESERVATION WATER LEVEL 1 Press the "POWER ON/OFF" button to switch on the power supply POWER ON/OFF 2 Press the button of" PROGRAM/RESERVATION" to select a suitable full-automatic program PROGRAM RESERVATION After switching on, the "Standard" program will be the default. If other full-automatic program is
Summary of the content on the page No. 14
Attention Even there's no water in the tub, the spinning will start after a certain period. Do not use soak process for woolen laundries. Wash the laundries that are prone to lose colors separately from other laundries. The pulsator will not rotate unless the water is filled to selected water level. Selection method of the procedure programs Times of pushing Contents(tthe nixie tube indicates Selected program Applicable procedure the"select"button the programs about to run) 0 Normal wash STAND
Summary of the content on the page No. 15
3 Press the "WATER LEVEL" button to select suitable water level WATER LEVEL After switching on the power, press the button "WATER LEVEL" to select a water level according to the load. Please refer to the button " Water level" on page 10. Page 10 4 Push the " PROGRAM/RESERVATION" button to select suitable reserve program PROGRAM RESERVATION After switching on, the washing machine reserved wash program will be automatically set inactive. If you desire a wash cycle to end at a reserved ti
Summary of the content on the page No. 16
Disposal after washing After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. When washing, lint filter must be used After using, please clean it in time. Lint filter: Clean 1.Pull upward to detach Figure 1 2.Clean the lint Put it in water and clean while it is still wet. (See to Figure 1). Dismantle Install Install Dismantle 3.Pre
Summary of the content on the page No. 17
Trouble shooting Answer to question (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company. Do not repair it by yourself. The reason How to settle Phenomena Buzzing upon reservation starts, Close the top lid The top lid is not closed Nixie tube indica
Summary of the content on the page No. 18
Packing list Name Quantity One piece User's manual Components of the water inlet hose One piece Lint filter Two pieces Bottom plate One piece Tapping screws Seven pieces One set Full automatic washing machine Specification High/About 48 L Medium/About 37L Water level/Water quantity (about) Low/About 30L Very low/About 20L 0.03MPa-0.78MPa Water inlet pressure 16
