Summary of the content on the page No. 1
INSTRUCTION MANUAL
MANUAL DE INSTRUCCIONES
Model Numbers/ No. de Modelos: W757-1 / W758PS-1
PORTABLE WASHER
LAVADORA PORTATIL
BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING
INSTRUCTIONS.
La sección en español empieza en la página 23.
Avanti has a policy of continuous improvement on its products and reserves the right to change materials and specifications
without notice.
Avanti Products, A Division of the M
Summary of the content on the page No. 2
2
Summary of the content on the page No. 3
TABLE OF CONTENTS Appliance Safety 4 Important Safeguides 5 Help Us Help You / If You Need Service 6 Parts, Features, and Accessories 7 Important Safety Instructions 8 Installation Instructions 9 Before Using Your Portable Washer 9 Selecting a Location 9 Adjusting the Adjustable Foot 10 Installing the Noise Damper Plate 10 Connecting the Water Supply Hoses / Sink Faucet Connection 11 – 12 Disconnecting the Water Supply Hoses / Positioning the Dra
Summary of the content on the page No. 4
APPLIANCE SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the Safety Alert Symbol. This symbol alerts you to potential hazards that can kill or injure you and others. All safety messages will follow the Safety Alert Symbol and either the words “DANGER”, “WARNING” or “CAUTION”.
Summary of the content on the page No. 5
IMPORTANT SAFEGUIDES Before the appliance is used, it must be properly positioned and installed as described in this manual, so read the manual carefully. To reduce the risk of fire, electrical shock or injury when using the appliance, follow basic precaution, including the following: Plug into a grounded 3-prong outlet, do not remove grounding prong, do not use an adapter, and do not use an extension cord. Replace all panels before opera
Summary of the content on the page No. 6
HELP US HELP YOU... Read this guide carefully. Write down the model and serial numbers. It is intended to help you operate and maintain You'll find them on a plate located on the rear your new portable washer properly. outside wall of the portable washer. Keep it handy to answer your questions. Please write these numbers here: If you don't understand something or you need more assistance, please call: ____________________________________ Date of Purchase Avanti C
Summary of the content on the page No. 7
PARTS & FEATURES Models: W757-1 Color: White W758PS Color: Platinum Capacity: Cubic Feet: 1.65 Pounds: 12 Lbs. Adjustment Knob – Adjustable foot ACCESSORIES (INCLUDED) 7
Summary of the content on the page No. 8
IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of fire, electrical shock, or injury when using your portable washer, follow WARNING these basic precautions: Read all instructions before using the portable washer. Do not wash articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry-cleaning solvents, or other flammable or explosive substances, as they give off vapors that could ignite or explode. Do not add gasoline, dry-cleaning sol
Summary of the content on the page No. 9
INSTALLATION INSTRUCTIONS BEFORE USING YOUR PORTABLE WASHER SCREWDRIVER Remove the exterior and interior packing. You will need the following tools: Wrench Pliers Screwdriver Check to be sure you have all of the following parts: PLIERS WRENCH 2 Inlet Hoses 2 Faucet Adapters 1 Noise Proof Plate With Screws 4 Rubber Washers 4 Casters Remove shipping brace. Note - It should be saved and used (to prevent damage to washer components) whenever washer is move
Summary of the content on the page No. 10
ADJUSTING THE ADJUSTABLE FOOT / SAFETY STOPPER For a more efficient use of your portable washer it must be located on a level hard – stable surface. If the floor is uneven adjust the adjustable foot (do not insert pieces of wood, or any other objects under the feet). Place the washer on a sturdy flat surface. Lower (Loosen) the adjustable foot by turning the level adjustable knob by hand until it is at the desired height. Raise (Tighten) the adjustable foot by turning the lev
Summary of the content on the page No. 11
CONNECTING THE WATER SUPPLY HOSES The water supply hose must be connected to the washing machine at one end and to the water faucet at the other. Do not stretch the water supply hose. If the hose is too short and you do not wish to move the water faucet, replace the hose with a longer, high-pressure hose. Select appropriate faucet as shown in the figures below. If none of these faucets are available, use the faucet adapter provided. The end of faucet spout should be longer than 10mm (0.4
Summary of the content on the page No. 12
SINK FAUCET CONNECTION For normal kitchen-sink tap only use the inlet hose with cold water inlet. Connect the inlet hose to the male hose thread adapter by turning it clockwise to be fixed tightly. Make sure to insert the rubber ring enclosed. Then connect tightly to your sink. Note: Some faucets may require you to also use the female hose thread adapter between the male adapter and your sink faucet as shown below. Make sure the rubber ring is inserted and connect to your sink.
Summary of the content on the page No. 13
ELECTRICAL CONNECTION Warning Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is damaged, have it replaced by an authorized Avanti Products service center. This appliance should be properly grounded for your safety. The power cord of this appliance is equipped with a three- prong plug which mates with standard three prong wall outlets to minimize the possibility of electrical shock. Do not under any circumstances cut or rem
Summary of the content on the page No. 14
CONTROL PANEL 1. Water Temperature Indicator 9. Water Temperature Selection Button 2. Water Level Indicator 10. Water Level Selection Button 3. Delay Time Indicator 11. Delay Selection Button 4. Wash Time Indicator 12. Function Selection Button 5. LED Display 13. Program (Automatic) Selection Button 6. Hour Indicator 14. Start / Pause Button 7. Minute Indicator 15. Power ON / OFF Button 8. Function Indicator FUNCTION DESCRIPTIONS 9 10
Summary of the content on the page No. 15
OPERATING YOUR PORTABLE WASHER PREPARATION 1. Connect the water inlet hose 3. Insert the plug into the 4. Insert the end of drain hose to the water faucet. Don’t socket. For safety the plug into the hook shelf, and hang switch on the power if the should have ground the drain hose over a drain water pressure is lower than connection. outlet. 0.05MPa and higher than 0.5MPa. 2. Open the water faucet. 5. Put the wash load into the 6. Add the suitable quantity 7. C
Summary of the content on the page No. 16
BEFORE WASHING Make sure that you follow all manufacturer instructions for washing: 16
Summary of the content on the page No. 17
OPERATING INSTRUCTIONS PRESS THE POWER BUTTON. PRESS THE WATER LEVEL BUTTON. Choose appropriate water level according to wash load quantity. WATER TEMPERATURE CHOICE. Press the water temperature selection button, you can choose to from cold, warm, and/or hot water. NOTE: The washer will provide a cold rinse in all TEMPERATURE settings. Indicator Description Light Shown This means that you have selected to use COOL or cold water. The washing COOL machine will only use wate
Summary of the content on the page No. 18
RINSE AND SPIN Press down the POWER button. Press the function button until the RINSE & SPIN indicators are ON. Press the water level button to select the appropriate water level setting. Press the START/PAUSE to start the course. And the LED display will show the remaining time of the entire course. Note: At this function, the water temp can’t be chosen, the default water temp is COOL. SPIN ONLY Press down the power button. Press the function button to select the SPIN fun
Summary of the content on the page No. 19
Note: The default function is WASH, RINSE and SPIN, if you need the SOAK function, please press the function button to choose the SOAK function. Close the lid, or the washing machine will buzz during wash and spin cycle. In the event the clothing loaded becomes unbalanced, the safety switch will be triggered causing the washing machine to automatically refill with water to adjust the imbalance. Note: Clothes easily discolored should be washed separately so as to prevent inter-dyein
Summary of the content on the page No. 20
CARE AND MAINTENANCE CLEANING YOUR PORTABLE WASHER Clean the surface of your portable washer regularly with soft fabric. Clean the inner tub regularly, especially immediately after starch or bleach operation. Clean the filter in the inlet valve or inlet hose regularly in order to prevent it from clogging. Remove the inlet hose and clean Clean the surface of Unplug the power cord. the filter with a brush. the washing machine with a soft cloth regularly.
