Summary of the content on the page No. 1
Operation Manual
Thank you for selecting the ZOOM G1u (hereafter simply called the "G1u").
Please take the time to read this manual carefully to get the most out of the
unit and to ensure optimum performance and reliability.
Keep this manual at hand for future reference.
Contents
SAFETY PRECAUTIONS / Usage Precautions · · · ·2 · Using the G1u as an Audio Interface · · · · · · ·2 ·0 · ·
About ZFX Tools · · · · · · · · · · · · · · · · · · 20 · · · · · · ·
Terms Used in This Manual · ·
Summary of the content on the page No. 2
Terms Used in This Manual Terms Used in This Manual SAFETY PRECAUTIONS / Usage Precautions • Extreme t emperature s SAFETY PRECAUTIONS This section explains some important terms that are used throughout the G1u manual. • Heat sources such as radiators or stoves In this manual, symbols are used to highlight warnings and • High humidity or mo isture cautions for you to read so that accidents can be prevented. BANK 9 • Excessive dust or sand Effect modules The meanings of these symbols
Summary of the content on the page No. 3
Controls and Functions / Connections Controls and Functions / Connections [VALUE] knob This knob serves for changing parameter values and setting the Top Panel level of the overall patch. Module selector [STORE] key Switches between play mode, rhythm mode, and edit mode. In edit mode, the knob Serves for storing edited patches in memory and for copying selects the module/parameter for operation. patches to another location. [BANK UP·TAP] key RHYTHM [ R/ P] key In play mode, the key swi
Summary of the content on the page No. 4
Selecting a Patch for Playing (Play Mode) Selecting a Patch for Playing (Play Mode) Select a patch 3 This section explains basic functions of the play mode. Use the foot switches. Press the [ ] foot switch to call up the next higher Q Turn power on 1 patch. The volume control on the connected amplifier A 0 A 1 should be turned down. Press the [ ] foot switch to call up the next lower W When using the unit on batteries patch. Plug a shielded cable into the [INPUT] jack. When usin
Summary of the content on the page No. 5
Using the Tuner Using the Tuner Tune your instrument 2 To use the tuner function of the G1u, the built-in effects must be bypassed (temporarily turned off) Play the open string to tune, and adjust the pitch. or muted (original sound and effect sound turned off). The left side of the display shows the note The right side of the display shows a symbol that which is closest to the current pitch. indicates by how much the tuning is off. Switch to bypass or mute 1 Pitch is high Pitch is correc
Summary of the content on the page No. 6
Using the Rhythm Function (Rhythm Mode) Using the Rhythm Function (Rhythm Mode) Adjust the rhythm volume 4 This section describes how to use the built-in rhythm function that plays realistic drum sounds in Turn the [VALUE] knob. various patterns. The current setting (0 – 30) is shown briefly on the Select rhythm mode 1 2 5 display. Set the Module selector to the "RHYTHM" position. Adjust the tempo 5 The number of the currently selected rhythm pattern (01 – 40) appears on the display.
Summary of the content on the page No. 7
Using the Looping Function (Looping Mode) Using the Looping Function (Looping Mode) • When 1 – 8 was selected as r ecor ding method After the specified time has elapsed, recording terminates and loop playback starts. The G1u has a built-in looping function that can record and repeat up to five seconds of your play • When Mn was selected as recording method P L or record phrases as an overdub. This section describes how to use the looping mode. When the [ ] foot switch is pressed again,
Summary of the content on the page No. 8
Editing a Patch (Edit Mode) Editing a Patch (Edit Mode) Change the setting 2 The patches of the G1u can be freely edited by changing the effect type used by the various Turn the [VALUE] knob. modules and by changing the parameter settings. Try editing the currently selected patch to create your own sound. The setting of the selected item changes, and a dot (.) appears in the bottom right of the display. This indicates that a setting has been changed from the Select the effect module/par
Summary of the content on the page No. 9
Storing/Copying Patches (Store Mode) Storing/Copying Patches (Store Mode) Press the [STORE] key once more 3 An edited patch can be stored in the user-editable banks (A – J). It is also possible to store an When the store/copy process is completed, the G1u existing patch in another location to create a copy. returns to the previous mode, with the target patch selected. In play mode or edit mode, press the [STORE] key 1 To cancel the store process, operate the [VALUE] knob B 8 HINT befo
Summary of the content on the page No. 10
Using a Foot Switch or Pedal Changing the Way Patches Are Called Up • Edit mode/Stor e mode The foot switch has no effect. This section describes how to change the patch selection method of the G1u to "pre-select". In this mode, you first select the patch to use next, and then perform an additional step to activate the Using an expression pedal patch. Display Control target 1. T ur n power to the G1u on while 3. When you have specified the patch to When the optional expression pedal
Summary of the content on the page No. 11
Effect Types and Parameters Using the G1u as an Audio Interface Effect Types and Parameters At the same time, the [OUTPUT] jack of the G1u When the G1u is connected to a computer via Explanation of symbols carries the playback sound from the audio tracks the USB port, it can function as an audio of the DAW application, mixed with the guitar interface for the computer. The operating • T ap • Module selector sound processed by the effects of the G1u. environment condit
Summary of the content on the page No. 12
Effect Types and Parameters Effect Types and Parameters Pedal Vox Z CLEAN Z WILD C W V 1 V 9 High-gain sound with further boost in the This ef fect simulates a vintage V ox wah pedal at half-open. Higher settings shift the emphasized frequency Zoom original flat clean sound. overdrive. upwards. Z MP1 Z BOTTOM Pedal Cry 1 9 M B Original sound that combines characteristics High-gain sound with pronounced low and This ef fect simulates a vintage Jen Crybaby pedal at half-open. Higher settin
Summary of the content on the page No. 13
Effect Types and Parameters Effect Types and Parameters Combo & ZNR Vibrato Rate C 0 C 9 Combination of ZNR with amp simulator that recreates the sound of a combo amp with closed-back cabinet. This is an effect with automatic vibrato. V 1 V 9 1 5 0 The right-digit value controls ZNR sensitivity . Higher right-digit settings emphasize the Adjusts the modulation rate. vibrato intensity. Bright Combo & ZNR Pitch Bend Pedal Position B 0 B 9 Combination of ZNR with amp simulator that recrea
Summary of the content on the page No. 14
Effect Types and Parameters Checking the G1u Version Analog Delay Rhythm Function Preset Patterns A 1 A 9 This effect simulates an analog delay with a long delay time of up to 5000 msec. The right-digit setting values control the mixing ratio of the effect sound and the feedback amount. # Name TimSig # Name TimSig # Name TimSig # Name TimSig Ping Pong Delay 1 8beat 1 4/4 11 METAL 2 4/4 21 POP 3 4/4 31 BALLAD 1 4/4 P 1 P 9 This is a ping-pong type delay where the delay sound alternates betw
Summary of the content on the page No. 15
Specifications Effect types 67 Control input For FP01/FP02 or FS01 Effect modules max. 8 simultaneous mo dules Patch memory User banks: 10 patches x 10 banks = 100 USB interface 16-bit PC interface (one line each for stereo Preset banks: 10 patches x 10 banks = 100 record/play) Total 200 patches Sampling frequencies 32 kHz, 44.1 kHz, 48 kHz Sampling frequency 96 kHz A/D converter 24 bit 64 times oversampling Power requirements AC adapter 9 V DC, 300 mA (center m
Summary of the content on the page No. 16
PATCH LIST • The preset area of banks 0 – 9 contains the same patches as A – J. • We recommend you to adjust the Noise Reduction parameter according to your guitars, amps and recording or performance situation. PATCH LIST Manufacturer names and product names mentioned in this patch list are trademarks or registered trademarks of their respective owners
Summary of the content on the page No. 17
PATCH LIST PATCH LIST www.myspace.com/michaelamott PATCH NAME COMMENT PATCH NAME COMMENT www.archenemy.net 0 FdComp 0 Comprs www.myspace.com/archenemy www.myspace.com/spiritualbeggars 1 Auto Wah 1 FullVx www.myspace.com/carcass • The preset area of banks 0 – 3 contains the same patches as A – d. Manufacturer names and product names mentioned in this pat
Summary of the content on the page No. 18
ZFX Tools Startup Guide ZFX Tools is an application combining a number of useful functions. It includes a recorder that makes it easy to capture your instrument, a sound-coordinated rhythm machine that gives you a virtual drummer and bassist, an editor with an intuitive mouse-based interface, a librarian function for managing patches, and a precision tuner. In addition, a search function lets you download the latest patches or rhythms and access a vast assortment of preset patches and rhythm p
Summary of the content on the page No. 19
ZFX Tools Startup Guide Startup Recording an Instrument Connect the G1u to the computer Use the search function to find a patch Start to record Click the [Record] button and then the [Play] button in the and rhythm pattern Recording area to start recording while playing the selected When you connect the G1u to the computer, ZFX Tools starts rhythm pattern as a backing. up automatically, and the main screen such as shown below appears. Click the [Search] button to bring up the search
Summary of the content on the page No. 20
Ableton Live Lite 7 ZOOM Edition Startup Guide Ableton Live Lite 7 ZOOM Edition Startup Guide This guide explains how to install Ableton Live Lite 7 ZOOM Edition (hereafter simply called "Live Lite 7") on Live Lite 7 installation Connections and preparation Using Live Lite 7 to record a computer, make connections and settings for this unit and record. Mac OS X Live Lite 7 installation Connections and preparation Using Live Lite 7 to record Windows Vista/XP Live Lite 7 installation Connections
