Summary of the content on the page No. 1
MODEL D4070/D4077
ELEcTric hO iST
OWNEr'S MANUAL
Phone: (360) 734-3482 • Online Technical Support: tech-support@shopfox.biz
cOPYriGhT © MAY, 2010 BY WOODSTOcK iNTErNATiONAL, iNc.
WArNiNG: NO POrTiON OF ThiS MANUAL MAY BE rEPrODUcED iN ANY ShAPE Or FOrM WiThOUT
ThE WriTTEN APPrOVAL OF WOODSTOcK iNTErNATiONAL, iNc.
#12925Tr Printed in china
Summary of the content on the page No. 2
This manual provides critical safety instructions on the proper setup, operation, maintenance and service of this machine/equipment. Failure to read, understand and follow the instructions given in this manual may result in serious personal injury, including amputation, electrocution or death. The owner of this machine/equipment is solely responsible for its safe use. This responsibility includes but is not limited to proper installa- tion in a safe environment, personnel training and usag
Summary of the content on the page No. 3
Model D4070/D4077 Electric Hoist SAFETY For Your Own Safety Read Instruction Manual Before Operating This Equipment The purpose of safety symbols is to attract your attention to possible hazardous conditions. This manual uses a series of symbols and signal words which are intended to convey the level of importance of the safety messages. The progression of symbols is described below. Remember that safety messages by themselves do not eliminate danger and are not a substitute for proper acci
Summary of the content on the page No. 4
Model D4070/D4077 Electric Hoist Safety Instructions for Electric Hoists 1. READ ENTIRE MANUAL BEFORE 8. ONLY USE RECOMMENDED USING. Trained users have a lower ACCESSORIES. Using improper risk of injury than untrained users. accessories may cause injury. 2. NEVER ALLOW UNQUALIFIED 9. CHECK FOR DAMAGED PARTS PERSONNEL TO SERVICE HOIST. BEFORE USING HOIST. Check for Servicing hoist incorrectly may broken parts, loose bolts, frayed cause failure under load. cable, cracked or worn components
Summary of the content on the page No. 5
Model D4070/D4077 Electric Hoist INTRODUCTION Woodstock Technical Specifications Support MODEL D4070 SINGLE CABLE DOUBLE CABLE This tool has been specially designed to MAX CAPACITY 220 lbs. 440 lbs. provide many years of trouble-free ser- LIFTING HEIGHT 33 ft. 16.5 ft. LIFTING SPEED 38 ft./min. 19 ft/min vice. Close attention to detail, ruggedly CABLE DIAMETER 1/8" built parts and a rigid quality control pro- gram assure safe and reliable operation. MODEL D4077 SINGLE CABLE DOUBLE CABLE MAX CA
Summary of the content on the page No. 6
Model D4070/D4077 Electric Hoist SETUP Unpacking Site Considerations The electric hoist was carefully packaged Weight Capacity for safe shipping. If you discover any Refer to the weight capacity listed in damage after you have signed for Specifications on Page 3. When choosing delivery, immediately call Customer a mounting site, verify that the lifting Service at (360) 734-3482 for advice. structure can withstand at least the maximum loading capacity as well as any Save the containers
Summary of the content on the page No. 7
Model D4070/D4077 Electric Hoist Mounting The Model D4070/D4077 electric hoist comes pre-assembled and only needs to be mounted to prepare for operation. There are many mounting options for your hoist. It may be mounted on a metal tubing or on a rotating pillar (Figure 3). Above all, choose a mounting option that is safe and will withstand the maximum Figure 4. Securing mounting bracket rated load of the hoist. (pole not shown for clarity). 3. Firmly tighten the hex bolts, and check to
Summary of the content on the page No. 8
Model D4070/D4077 Electric Hoist 3. Let go of the hook and move to a safe Test Operation distance. The Model D4070/D4077 electric hoist has a safety stop microswitch that will 4. Use the control handle to fully retract automatically shut OFF the motor before the cable. the lift or pulley hook can be retracted into the housing. – If the motor shuts OFF when the cable stop compresses the spacing If the hook is allowed to retract into rack (Figure 7), the safety stop the housing, the hoi
Summary of the content on the page No. 9
Model D4070/D4077 Electric Hoist OPERATIONS To use the electric hoist: 4. Securely attach the item being lifted by using the lift hook (for single 1. Plug the electric hoist into a cable use) or the pulley lift hook (for grounded 110V outlet. double cable use). 2. Grab the lift hook and pull it away from the hoist while using the control switch to lower the hoist cable by Never wrap the cable around the pressing the switch downward. item being lifted and hook it onto the cable itself. Da
Summary of the content on the page No. 10
Model D4070/D4077 Electric Hoist MAINTENANCE General Lubrication Check mounting hardware daily before Lubricate the hoist cable with a light use for cracks, unsafe wear, deformation, oil to inhibit rust and reduce friction, or warping. If damaged or worn, replace depending on frequency of use and it. DO NOT attempt to fix it or continue environment. If the cable becomes wet using it! during use, dry and lightly oil it before retracting back onto the spool. Check that the microswitch is func
Summary of the content on the page No. 11
Model D4070/D4077 Electric Hoist D4070 Breakdown -9- 43 27 44 24 1 2 41 42 3 35 40 4 38 39 5 25A 6 37 45 43 44 36 46 34 35 33 32 47 25 48 51 24 52 26 49 22 53 50 23 27 54 24 28 55 20 30 53 31 64 60 19 56 29 61 10 63 72 59 28 58 9 53 8 21 78 57 18 54 53 63 7 16 17 54 79 60 73 64 74 62 52 52 15 75 65 60 53 84 66 71 83 77 69 67 12 70 82 43 68 63 76 81 64 11 13 14 12 80
Summary of the content on the page No. 12
Model D4070/D4077 Electric Hoist D4070 Parts List REF PART # DESCRIPTION REF PART # DESCRIPTION 1 XD4070001 BODY 43 XPW07M FLAT WASHER 3MM 2 XPCAP14M CAP SCREW M8-1.25 X 20 44 XPS12M PHLP HD SCR M3-.5 X 6 3 XD4070003 MOUNTING BRACKET 45 XD4070045 MOTOR FAN COVER 4 XD4070004 HEX BOLT M8-1.25 X 25 G-8.8 46 XD4070046 MOTOR FAN 5 XD4070005 EXT TOOTH WASHER 8MM 47 XD4070047 CONNECTION CORDS 6 XPW01M FLAT WASHER 8MM 48 XD4070048 TOP CONNECTING HOUSING 7 XD4070007 SPOOL END 49 XD4070049 TERMINAL BLOCK
Summary of the content on the page No. 13
Model D4070/D4077 Electric Hoist D4077 Breakdown -11- 26 1 41 2 40 3 39 4 33 5 38 37 66 6 44 36 42 35 43 46 61 45 34 66 64 65 32 47 19 31 84 49 30 51 63 18 50 26 55 53 62 52 54 25 24 33 69 48 56 23 67 20 57 19 58 27 68 70 18 55 74 16 73 59 72 29 53 9 28 60 8 27 17 81 51 7 82 83 53 79 24A 75 80 59 71 42 77 55 11 76 10 21 78 15 13 14 12 22
Summary of the content on the page No. 14
Model D4070/D4077 Electric Hoist D4077 Parts List REF PART # DESCRIPTION REF PART # DESCRIPTION 1 XD4077001 BODY 43 XPS12M PHLP HD SCR M3-.5 X 6 2 XPCAP64M CAP SCREW M10-1.5 X 25 44 XD4077044 FAN COVER 3 XD4077003 MOUNTING BRACKET 45 XD4077045 MOTOR FAN 4 XPB01M HEX BOLT M10-1.5 X 30 46 XPSS03M SET SCREW M6-1 X 8 5 XPTLW08M EXT TOOTH WASHER 10MM 47 XD4077047 TOP HOUSING 6 XD4077006 SPECIAL NUT 48 XPR04M EXT RETAINING RING 6MM 7 XD4077007 SPOOL END 49 XD4077049 REMOTE SWITCH CORD 8 XD4077008 WEDG
Summary of the content on the page No. 15
WARRANTY AND RETURNS Woodstock International, Inc. warrants this equipment to be free of defects from workmanship and materials for a period of 1 year from the date of original purchase. The liability under this warranty shall not exceed the purchase price paid for the products and is limited to credit for, or replacement of the defective part. We do not warrant or represent that the merchandise complies with the provision of any law or acts, and buyer assumes all risk and liability resultin
Summary of the content on the page No. 16
High Quality Machines and Tools Woodstock International, Inc. carries thousands of products designed to meet the needs of today's woodworkers and metalworkers. Ask your dealer about these fine products:
