Summary of the content on the page No. 1
USER’S MANUAL
6.25 MOTORIZED TREADMILL
MODEL NUMBER: 6.25
USER WEIGHT LIMITATION: 350lbs (160kgs)
SERIAL NUMBER (found on frame):
Summary of the content on the page No. 2
2 SMOOTH 6.25 MOTORIZED TREADMILL PRECAUTIONS Precautions: WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and information before operating the treadmill. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. • Use the treadmill only as described in this manual. • Place on a level surface, with 2 meters (6 feet) of cl
Summary of the content on the page No. 3
3 SMOOTH 6.25 MOTORIZED TREADMILL POWER REQUIREMENTS Power Requirements: IMPROPER CONNECTION OF THE EQUIPMENT GROUNDING CONNECTOR CAN RESULT IN A RISK OF AN ELECTRIC SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR SERVICE MAN IF YOU ARE IN DOUBT AS TO WHETHER THE PRODUCT IS PROPERLY GROUNDED. DO NOT MODIFY THE PLUG PROVIDED WITH THE PRODUCT, IF IT WILL NOT FIT THE OUTLET; HAVE A PROPER OUTLET INSTALLED BY A QUALIFIED ELECTRICIAN. This treadmill can be seriously damaged by sudd
Summary of the content on the page No. 4
4 SMOOTH 6.25 MOTORIZED TREADMILL PREASSEMBLY Open the boxes: You are now ready to open the boxes of your new equipment. Make sure to inventory all of the parts that are included in the boxes. Check the Hardware Comparison Chart for a full count of the number of parts included for this product to be assembled properly. If you are missing any parts or have any assembly questions call the manufacturer. Gather your tools: Before starting the assembly of your unit, make sure
Summary of the content on the page No. 5
5 SMOOTH 6.25 MOTORIZED TREADMILL HARDWARE COMPARISON CHART Hardware chart: For your convenience, we have identified the hardware used in the assembly of this product. This chart is provided to help you identify those items that may be unfamiliar to you. 4 116 56 15 103 NO. DESCRIPTION QTY. M6 x 20mm Console 4 Fixing Screw 2 5 M8 x 55mm Allen Bolt 4 15 4 x 19mm Screw 8 5 104 111 56 M8 x 16mm Bolt (Silver) 4 103 M8 x 110mm Bolt 2 104 Curve Washer 2 111 M6 x 50 Allen Bol
Summary of the content on the page No. 6
6 SMOOTH 6.25 MOTORIZED TREADMILL PARTS LIST NO. DESCRIPTION QTY. ORDER NO. NO. DESCRIPTION QTY. ORDER NO. 1 COMPUTER INSERT 1 6.25-01 29 POWER PLATE 1 6.256.25-29 2 EKG PULSE SENSOR 2 6.25-02 30 M5 X 12MM SCREW 1 6.25-30 FRONT HANDLE BAR 3 FOAM GRIP 2 6.25-03 31 WASHER 1 6.25-31 M6 X 20MM CONSOLE 4 FIXING SCREW 2 6.25-04 32 FOOT LOCKER 1 6.25-32 M8 X 55MM ALLEN 5 BOLT 4 6.25-05 33 FOOT LOCKER SPRING 1 6.25-33 6 FRONT HANDLEBAR 1 6.25-06 34 BASE FRAME END CAP 2 6.25-3
Summary of the content on the page No. 7
7 SMOOTH 6.25 MOTORIZED TREADMILL PARTS LIST NO. DESCRIPTION QTY. ORDER NO. NO. DESCRIPTION QTY. ORDER NO. 57 M10 X 136MM BOLT 1 6.25-57 86 REAR ROLLER SHAFT 1 6.25-86 58 MOTOR HOLDER 1 6.25-58 87 M6 X 70 ALLEN BOLT 3 6.25-87 SIDE RAIL END CAP - 59 DRIVING MOTOR 1 6.25-59 88 LEFT 1 6.25-88 SIDE RAIL END CAP - 60 ELEVATION MOTOR 1 6.25-60 89 RIGHT 1 6.25-89 ELEVATION GEAR 61 SLEEVE 1 6.25-61 90 M8 NYLON NUT 4 6.25-90 62 4 X 12 WASHER 10 6.25-62 91 M8 X 43MM BOLT 2 6.25-
Summary of the content on the page No. 8
8 SMOOTH 6.25 MOTORIZED TREADMILL PARTS DIAGRAM A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY. 110 109 1 107 111 108 5 106 99 8 56 17 103 12 5 117 15 21 18 99 56 104 4 16 117 9 19 103 15 10 104 21 20 116 11 104 13 2 3 9 15 105 104 10 116 6 11 118 14 7 78 24 105 52 15 25 28 22 29 23 15 30 27 23 113 31 32 37 33 100 25 38 36 39 40 41 34 100 115 42 45 114 43 15 35 44 112 45 15 90 102 101 Visit us at: www.smoothfitness.com
Summary of the content on the page No. 9
9 SMOOTH 6.25 MOTORIZED TREADMILL PARTS DIAGRAM A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY. 46 49 47 50 48 62 90 60 62 53 63 21 61 63 57 69 51 54 68 55 66 26 70 15 84 67 26 58 59 71 87 72 65 15 119 82 73 74 81 119 15 82 76 85 75 80 79 88 44 72 87 77 86 89 15 90 92 15 26 94 25 96 93 95 26 97 91 98 15 83 92 56 Visit us at: www.smoothfitness.com
Summary of the content on the page No. 10
10 SMOOTH 6.25 MOTORIZED TREADMILL ASSEMBLY STEP 1: Remove packing material form the treadmill carton as shown in FIG 1. Please refer to the page 21 “Folding Instruction” to fold up the running deck. Remove the parts that underneath the running deck. Refer to the page 22 “Unfolding Instruction” to unfold the running deck. FIG. 1 Visit us at: www.smoothfitness.com
Summary of the content on the page No. 11
11 SMOOTH 6.25 MOTORIZED TREADMILL ASSEMBLY STEP 2: Attach the Left Upright (13) and Right Upright (14) to Console Support Tube (12) with four M8 x 55mm Allen Bolt (5) and two Console Support Fixing Plate (99). Secure the Console (107) to Console Support Tube (12) with two M6 x 50mm Bolt (111). 111 13 111 107 12 14 5 99 5 99 Visit us at: www.smoothfitness.com
Summary of the content on the page No. 12
12 SMOOTH 6.25 MOTORIZED TREADMILL ASSEMBLY STEP 3: Connect the Upper Section Computer Wire (7) to the Lower Section 7 Pin Control Wire (24) and the Upper Section Safety Key Wire (78) to the Lower Section Safety Key Wire (52). Insert any extra cable length into the Left Upright (13). Insert the Left and Right Uprights (13 and 14) into the Base Frame (36) and secure by tightening the two Bolts (105) as shown in FIG 2. The two Bolts (105) are preassembled to the Base Frame
Summary of the content on the page No. 13
13 SMOOTH 6.25 MOTORIZED TREADMILL ASSEMBLY STEP 4: Insert the Water Bottle Holder (108) into Console (106). 108 106 Visit us at: www.smoothfitness.com
Summary of the content on the page No. 14
14 SMOOTH 6.25 MOTORIZED TREADMILL ASSEMBLY STEP 5: Slide the Handlebar Cover – Left #2 (18) and Handlebar Cover – Right #1 (19) onto the Cross Brace (16) as shown. Attach the Cross Brace (16) to the Left Upright (13) and Right Upright (14) using M8 x 80mm Allen Bolt (103). Do not fully tighten the M8 x 110mm Allen Bolt (103) at this time. 19 18 16 16 18 103 103 14 13 Visit us at: www.smoothfitness.com
Summary of the content on the page No. 15
15 SMOOTH 6.25 MOTORIZED TREADMILL ASSEMBLY STEP 6: Secure the Console (107) to Cross Brace (16) with two M6 x 20mm Console Fixing Screw (4). Fully tighten the two M8 x 110mm Allen Bolts (103) used in step 5. 107 16 4 Visit us at: www.smoothfitness.com
Summary of the content on the page No. 16
16 SMOOTH 6.25 MOTORIZED TREADMILL ASSEMBLY STEP 7: First connect the EKG Pulse Wire- Upper Section (117) to EKG Pulse Wire – Lower Section (118) as shown in FIG.2. Insert the Front Handlebar (6) into the Console Support Tube (12) and secure using four M8 x 16mm Bolt (Silver) (56) as shown. 6 FIG.2 56 6 56 12 12 56 118 117 Visit us at: www.smoothfitness.com
Summary of the content on the page No. 17
17 SMOOTH 6.25 MOTORIZED TREADMILL ASSEMBLY STEP 8: Insert the Handlebars (9) into the Left and Right Uprights (13 and 14) and secure using two Front Handlebar Fixing Bolts (116) and two Curve Washer (104). 9 116 9 104 116 14 13 Visit us at: www.smoothfitness.com
Summary of the content on the page No. 18
18 SMOOTH 6.25 MOTORIZED TREADMILL ASSEMBLY STEP 9: Attach the Handlebar Cover – Left #1(17) to the Handlebar Cover – Left #2 (18) using three Plastic Cover Fixing Inserts (21) and four M4 x 15mm Screws (15) as shown. Attach the Handlebar Cover – Right #1 (20) to the Handlebar Cover – Right #2 (19) using three Plastic Cover Fixing Inserts (21) and four M4 x 15mm Screws (15) as shown. 15 21 15 17 18 21 19 15 20 Visit us at: www.smoothfitness.co
Summary of the content on the page No. 19
19 SMOOTH 6.25 MOTORIZED TREADMILL ASSEMBLY STEP 10: Remove the two 4 x 19 Screw (15) from Base Frame (36). Attach the Transport Wheel Cover (22) to Base Frame (36) with two 4 x 19 Screw (15) Your treadmill is now fully assembled. 36 22 15 Visit us at: www.smoothfitness.com
Summary of the content on the page No. 20
20 SMOOTH 6.25 MOTORIZED TREADMILL STABILIZER ADJUSTMENT How to level the treadmill: An uneven floor or improper stabilizer level can cause the treadmill to wobble during use as well as the incline adjustment to function incorrectly. Please follow the procedure described below to make sure the treadmill stabilizer is adjusted correctly prior to use. You may need the assistance of another person to perform this adjustment. 1. There are four stabilizers and two cushions loc
