Summary of the content on the page No. 1
USER’S MANUAL
5.65S MOTORIZED TREADMILL
USER WEIGHT LIMITATION: 300lbs(135kgs).
SERIAL NUMBER (found on frame):
Summary of the content on the page No. 2
2 5.65S TREADMILL PRECAUTIONS For future service or related questions: Please staple your receipt and/or write in the name and phone number of the retail store where you purchased your treadmill. Name: ______________________________ Phone Number: ___________________ Receipt: ______________________ Precautions: WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and information before operating the treadmil
Summary of the content on the page No. 3
www.smoothfitness.com 3 PRECAUTIONS Pour réparations futures ou questions connexes : Please staple your receipt and/or write in the name and phone number of the retail store where you purchased your treadmill. Name: ______________________________ Phone Number: ___________________ Receipt: ______________________ Précautions: AVERTISSEMENT : Pour réduire les risques de brûlures, d’incendie, de choc électrique ou de blessures aux personnes, lire les précautions importantes et
Summary of the content on the page No. 4
4 5.65S TREADMILL POWER REQUIREMENTS Power Requirements: IMPROPER CONNECTION OF THE EQUIPMENT GROUNDING CONNECTOR CAN RESULT IN THE RISK OF AN ELECTRIC SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR SERVICE MAN IF YOU ARE IN DOUBT AS TO WHETHER THE PRODUCT IS PROPERLY GROUNDED. DO NOT MODIFY THE PLUG PROVIDED WITH THE PRODUCT, IF IT WILL NOT FIT THE OUTLET; HAVE A PROPER OUTLET INSTALLED BY A QUALIFIED ELECTRICIAN. This treadmill can be seriously damaged by sudden voltage changes
Summary of the content on the page No. 5
www.smoothfitness.com 5 POWER REQUIREMENTS Alimentation : UN MAUVAIS BRANCHEMENT DU CONNECTEUR DE MISE À LA TERRE DE L’ÉQUIPEMENT POURRAIT PROVOQUER UN CHOC ÉLECTRIQUE. EN CAS DE DOUTE, CONSULTER UN ÉLECTRICIEN OU UN RÉPARATEUR QUALIFIÉ POUR SAVOIR SI LE PRODUIT EST CORRECTEMENT MIS À LA TERRE. NE PAS MODIFIER LA FICHE FOURNIE AVEC LE PRODUIT. SI ELLE N’ENTRE PAS DANS LA PRISE, FAIRE INSTALLER UNE PRISE APPROPRIÉE PAR UN ÉLECTRICIEN PROFESSIONNEL. Ce tapis roulant pourrait être g
Summary of the content on the page No. 6
6 5.65S TREADMILL BEFORE YOU BEGIN Open the boxes: Open the boxes of your new equipment. Inventory all parts included in the boxes, and Supplied Hardware lists on page 7 for a full count of the parts included. If you are missing any parts or have any questions contact us directly at 888-800-1167 Gather your tools: Before you begin, make sure that you have gathered all the necessary tools you may require to assemble the unit properly. Having all of the necessary equipment at h
Summary of the content on the page No. 7
www.smoothfitness.com 7 SUPPLIED COMPONENTS / SUPPLIED HARDWARE This list identifies the major components you will use to assemble this product. No. Description Qty. A1 A2 302 301 A1 Treadmill Base 1 A2 Console Assembly 1 565-302 Left Upright 1 565-301 Right Upright 1 565-306 Left Protective Cover 1 565-307 Right Protective Cover 1 Hardware Kit 565-303 M8x15mm Bolt 12 306 307 565-305 M8 Washer 6 565-304 M8 Curve Washer 6 565-308 M4x15mm Bolt 2 565-309 M4x12
Summary of the content on the page No. 8
8 5.65S TREADMILL COMPLETE PARTS LIST Part No. Description Qty. 5.65S-1 Running Deck Frame 1 565S-101 Front Roller 1 565S-102 Rubber Cushion 6 565S-103 Running Deck 1 565S-104 Running Delt 1 565S-105 Rear Roller 1 565S-106 Motor Control Board 1 565S-107 Upper Motor Cover 1 565S-108 Inductance 1 565S-109 Wave Filter 1 565S-110 Front Mobile Wheel 2 565S-111 Brass Pillar 4 565S-112 Base Frame 1 565S-113 Speed Sensor 1 565S-114 On-off Switch 1 565S-115 M
Summary of the content on the page No. 9
www.smoothfitness.com 9 COMPLETE PARTS LIST Part No. Description Qty. M8*40mm 3 565S-141 M8 Nut 2 565S-142 M10*45mm Bolt 1 565S-143 M10 Nut 1 565S-144 M8 Spring Washer 5 565S-145 M8*15mm Bolt 2 565S-146 Ring Core 2 565S-147 M8*140mm Bolt 1 565S-148 M8 Nut 2 565S-149 5/16"*135mm Bolt 1 565S-150 Lower Console Wire 1 565S-151 M8 Spring washer 1 565S-152 M4*10mm-1 Bolt 8 565S-153 M4*10mm-2 Bolt 4 565S-154 Power Cord 1 565S-155 Washer, Stud 2 565S-15
Summary of the content on the page No. 10
10 5.65S TREADMILL COMPLETE PARTS LIST Part No. Description Qty. 565S-2 565S-201 Console Frame 1 565S-202 Console Housing 1 565S-203 M4x12mm Bolt 14 565S-204 Bottle Holder 1 565S-205 M5x15mm Bolt 2 565S-206 M4x15mm Bolt 5 565S-207 Handle Pulse Sensor 2 565S-208 M4x25mm Bolt 2 565S-209 Stud 2 565S-210 Ring Core 1 565S-211 Console Insert 1 565S-212 Fixing Bracket, left speaker 1 565S-213 Fixing Bracket, right speaker 1 565S-214 Panel, console 1 565S-215 M3x6mm Bolt 5 565S-
Summary of the content on the page No. 11
www.smoothfitness.com 11 COMPLETE PARTS LIST Part No. Description Qty. 565S-3 565S-301 Right Upright 1 565S-302 Left Upright 1 565S-303 M8x15mm Bolt 12 565S-304 M8 Curve Washer 6 565S-305 M8 Washer 6 565S-306 Left Protective Cover 1 565S-307 Right Protective Cover 1 565S-308 M4x15mm Bolt 2 565S-309 M4x12mm Bolt 2
Summary of the content on the page No. 12
12 5.65S TREADMILL PARTS DIAGRAM MOST OF THE PARTS SHOWN HERE HAVE BEEN PRE-ASSEMBLED
Summary of the content on the page No. 13
www.smoothfitness.com 13 PARTS DIAGRAM MOST OF THE PARTS SHOWN HERE HAVE BEEN PRE-ASSEMBLED.
Summary of the content on the page No. 14
14 5.65S TREADMILL PARTS DIAGRAM A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY.
Summary of the content on the page No. 15
www.smoothfitness.com 15 ASSEMBLY – PLEASE READ ALL STEPS BEFORE BEGINNING YOUR WORK. STEP1: Assemble Console Mast to Base Frame. NOTE: Make sure all wires are recessed into the frame. DO NOT trap or 303 X6 pinch. DO NOT tighten any bolts until STEP2. When attaching the Right upright (310) first attach the Lower Console Wire to the 305 X2 fish wire in the upright. This will allow you to pull the data cable up through the upright during installation 304 X4 1). Attach Left
Summary of the content on the page No. 16
16 5.65S TREADMILL ASSEMBLY STEP2: Attach Console to Left and Right Uprights 1). Connect the Upper Console Wire (230) from the console set to Lower Console Wire (151) in the right upright, Then place the excess wire and the connectors 303 X6 into right upright. 305 X4 2). Place the entire console set onto the uprights, and secure the left side using 3 x M8x15mm Bolt (303) with 2 x M8 Washer (305) and 1 x M8 Curve Washer (304). 304 X2 3). Repeat the above process for th
Summary of the content on the page No. 17
www.smoothfitness.com 17 ASSEMBLY STEP3: Fasten protective cover on the upright 1). Attach the Left Protective Cover (306) onto the Left upright and secure using 308 X2 1 x M4x15mm Bolt (308) and 1 x M4x12mm Bolt (309). 2). Repeat the above process for the Right side. 309 X2 307 306 308 309
Summary of the content on the page No. 18
18 5.65S TREADMILL ASSEMBLY STEP4: Assembly the console to the bottle holder Attach the Bottle holder to the console set, and secure using M5x15mm Bolt (205). 205 X2 204 X1 205 204 Tighten all bolts and fasteners now
Summary of the content on the page No. 19
www.smoothfitness.com 19 ASSEMBLY STEP 5: Insert the Safety Key (229) into Bottom Center of Console prior to operation. Your treadmill will not Function with out the safety key. 229 X1
Summary of the content on the page No. 20
20 5.65S TREADMILL ASSEMBLY How to fold and unfold the treadmill: Your treadmill can be folded up and unfold for space saving storage. To do this follow the instructions here: Fold Up 1. To fold the deck you first need to bring the treadmill to the lowest incline level and then remove the power cord 2. Lift the deck up from the rear of the treadmill and fold up until it locks in place. TO PREVENT INJURY BE SURE YOU HAVE A FIRM HOLD WHEN RAISING THE DECK. 3. You will
