Summary of the content on the page No. 1
www.proform.com
Model No. PFTL14511.0
USERʼS MANUAL
Serial No.
Write the serial number in the space
above for reference.
Serial Number
Decal
QUESTIONS?
If you have questions, or if parts are
damaged or missing, DO NOT CON-
TACT THE STORE; please contact
Customer Care.
IMPORTANT: Please register this
product (see the limited warranty
on the back cover of this manual)
before contacting Customer Care.
CALL TOLL-FREE:
1-888-533-1333
Mon.–Fri. 6 a.m.–6 p.m. MT
Sat. 8 a.m.–4 p.m. MT
ON THE WEB:
www.pr
Summary of the content on the page No. 2
TABLE OF CONTENTS WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ASSEMBLY . . . . . . . .
Summary of the content on the page No. 3
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read all important precautions and in- structions in this manual and all warnings on your treadmill before using your treadmill. ICON as- sumes no responsibility for personal injury or property damage sustained by or through the use of this product. 1. Before beginning any exercise program, con- carrying 15 or more amps. No other appliance sult your physician. This is especially impor- should be on the same circuit. Do not use
Summary of the content on the page No. 4
20. Never leave the treadmill unattended while it 24. Inspect and properly tighten all parts of the is running. Always remove the key, unplug treadmill regularly. the power cord, and press the power switch into the off position when the treadmill is not 25. DANGER: Always unplug the power in use. (See the drawing on page 5 for the lo- cord immediately after use, before cleaning the cation of the power switch.) treadmill, and before performing the mainte- nance and adjustment procedures described
Summary of the content on the page No. 5
BEFORE YOU BEGIN ® Thank you for selecting the revolutionary PROFORM ing this manual, please see the front cover of this man- PERFORMANCE 1450 treadmill. The ual. To help us assist you, please note the product PERFORMANCE 1450 treadmill offers an impressive model number and serial number before contacting us. selection of features designed to make your workouts The model number and the location of the serial num- at home more enjoyable and effective. And when ber decal are shown on the front cov
Summary of the content on the page No. 6
ASSEMBLY To hire an authorized service technician to assemble the treadmill, call 1-800-445-2480. Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, some lubricant may be transferred to the top of the walking belt or the shipping carton. This is normal and does not affec
Summary of the content on the page No. 7
1. Make sure that the power cord is unplugged. 1 Place a piece of cardboard below the rear of the Frame (56) to protect the floor or carpet. Attach the Left Wheel Cap (96) to the Base (94) with two #8 x 3/4" Screws (2). 56 Attach the Right Wheel Cap (not shown) to the right side of the Base (94) in the same way. 94 2 96 Cardboard 2. Pull the Upright Wire (81) and the Base Ground 2 Wire (110) through the indicated hole in the Base (94). Attach the Base Ground Wire (110) to the Base (94) with a #8
Summary of the content on the page No. 8
4. Hold the Left Upright (89) against the Base 4 (94). Be careful not to pinch the Upright Wire (81). Insert two 3/8" x 1 1/4" Bolts (8) with two 3/8" Star Washers (13) and two 3/8" x 81 2 3/4" Bolts (7) into the Left Upright. 89 Partially tighten the 3/8" x 2 3/4" Bolts (7) and the 3/8" x 1 1/4" Bolts (8) until the heads of the Bolts touch the Left Upright (89); do not fully tighten the Bolts yet. Note: It may be helpful to use the Short Hex Key (64) on the Bolt shown. 7 64 Attach the Right Upr
Summary of the content on the page No. 9
6. Cut the plastic tie in the Left Handrail (88) and 6 the Right Handrail (not shown). If necessary, press the 5/16" Cage Nuts (31) back into place. 81 Identify the Left Handrail (88) and hold it near the Left Upright (89). Insert the Upright Wire (81) through the bracket on the bottom of the 31 88 Left Handrail. Pull the Upright Wire out of the Tie end of the Left Handrail. 89 7. Attach the Left Handrail (88) to the Left Upright 7 (89) with two 5/16" x 1" Bolts (5), two 5/16" Star 4 Washers (11
Summary of the content on the page No. 10
8. Set the console assembly face down on a soft 8 surface to avoid scratching the console Console assembly. Assembly Remove all the Screws (A) attaching the Crossbar (93). Next, lift off the Crossbar. A Discard the Screws. 93 9. IMPORTANT: To avoid damaging the 9 112 Crossbar (93), do not use power tools and 9 do not overtighten the #10 x 3/4" Screws (9) 35 or the #10 x 3/4" Flat Head Screws (112). 87 93 112 9 Orient the Crossbar (93) as shown. Attach the Crossbar to the Handrails (87, 88) with
Summary of the content on the page No. 11
11. Set the console assembly on the Right Handrail 11 (87) and the Left Handrail (88). Be careful not Console to pinch any wires. Insert the excess Upright Assembly Wire (not shown) into the Left Handrail. Attach the console assembly with six #8 x 1/2" Screws (1) and four 1/4" x 1/2" Bolts (36) with four 5/16" Flat Washers (113) and four 1/4" Star 88 87 35 Washers (35) as shown. Start all six Screws 35 and all four Bolts, and then tighten each of 113 113 them. 36 36 See step 7. Tighten the four
Summary of the content on the page No. 12
14. Hold the Left Upright Cover (79) against the 14 console assembly. Align the holes in the Left Upright Cover with the holes in the Left Upright (89). Attach the Left Upright Cover with three #8 x 1/2" Screws (1). Attach the Right Upright Cover (80) to the Right Upright (90) in the same way. 79 Console 1 80 Assembly 1 1 90 89 15. Attach the Left Tray (107) and the Right Tray 15 (108) to the console assembly with four #8 x 1/2" Screws (1). 108 107 1 Console Assembly 1 1 16. Make sure that there
Summary of the content on the page No. 13
17. IMPORTANT: See page 15 and plug in the 17 power cord. Next, see page 17 and turn on IMPORTANT: the power. Make sure to follow all instructions in this step. See page 27; follow steps 1 through 3. When the frame stops moving, remove the key from the console and unplug the power cord. 18. IMPORTANT: Before you begin this step, 18 make sure that you have read and followed 56 all of the instructions in step 17. Raise the Frame (56) to the position shown. Have a second person hold the Frame until
Summary of the content on the page No. 14
19. Attach the Rear Feet (57) to the Frame (56) as 19 shown with four #8 x 3/4" Screws (2). See step 16. Discard the piece of cardboard. 57 Lower the Frame (56) (see HOW TO LOWER THE TREADMILL FOR USE on page 29). 57 2 2 56 20. Press the Grommet (77) into the square hole in 20 the Base (94). 94 77 21. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat
Summary of the content on the page No. 15
OPERATION AND ADJUSTMENT THE PRE-LUBRICATED WALKING BELT dance with all local codes and ordinances. IMPORTANT: The treadmill is not compatible with Your treadmill features a walking belt coated with high- GFCI-equipped outlets and may not be compatible performance lubricant. IMPORTANT: Never apply sil- with AFCI-equipped outlets. icone spray or other substances to the walking belt or the walking platform. Such substances will This product is for use on a nominal 120-volt circuit cause excessive
Summary of the content on the page No. 16
CONSOLE DIAGRAM FEATURES OF THE CONSOLE You can even browse the Internet or listen to your fa- vorite workout music or audio books with the consoleʼs The treadmill console offers an impressive array of stereo sound system while you exercise. features designed to make your workouts more effec- tive and enjoyable. The console features iFit Live tech- To turn on the power, see page 17. To set up the nology that enables the treadmill to communicate with console, see page 17. To use the manual mode,
Summary of the content on the page No. 17
HOW TO TURN ON THE POWER HOW TO SET UP THE CONSOLE IMPORTANT: If the treadmill has been exposed to Before using the treadmill for the first time, set up your cold temperatures, allow it to warm to room tem- console. perature before you turn on the power. If you do not do this, you may damage the console display 1. Connect to a wireless network. or other electrical components. See steps 1 and 2 on Plug in the power cord (see page 25 to connect to a page 15). Next, locate the wireless network. The
Summary of the content on the page No. 18
The browser will open to the iFit.com home page. HOW TO USE THE MANUAL MODE Touch the Register Now button in the upper-right corner of the screen. 1. Insert the key into the console. The browser will open to the iFit.com registration page. Touch an entry box to view the keyboard. See HOW TO TURN Slide your finger up or down the screen to scroll up ON THE POWER on or down the page. page 17. Note: It may take a minute for the Enter a username and password and your e-mail console to be ready for us
Summary of the content on the page No. 19
4. Change the incline of the treadmill as desired. • The number of vertical feet you have climbed To change the incline of the treadmill, press the • Your heart rate (see step 6 on page 20). Incline increase and decrease buttons or one of the numbered 1 Step Incline buttons. Each time you The displays at the top of the screen can show two press one of the buttons, the incline will gradually types of information. Touch each display until the change until it reaches the selected incline setting. d
Summary of the content on the page No. 20
6. Measure your heart rate if desired. speed of the fan will automatically increase and de- crease as the speed of the walking belt increases Before using the and decreases. handgrip pulse sensor, remove Press the Manual fan button repeatedly to select a the sheets of fan speed or to turn off the fan. Press the Auto fan plastic from the button to select the auto mode or to turn off the metal contacts fan. on the pulse bar. In addition, make 8. When you are finished exercising, remove the sure th
