Summary of the content on the page No. 1
www.clearcreekspas.com
Premier
Collection
Whirlpool Spa
Owner's Manual
Summary of the content on the page No. 2
www.clearcreekspas.com IMPORTANT SAFETY INFORMATION READ AND FOLLOW ALL INSTRUCTIONS Warning — Risk of injury: Children, the elderly, and the DANGER — RISK OF ELECTRICAL SHOCK: When install- infirm should not use the spa unless they are supervised at all ing and operating this electrical equipment, basic safety pre- times. Infants should not be permitted in the spa at water cautions should always be adhered to including the following. temperatures over 100° F (38°C). Warni
Summary of the content on the page No. 3
www.clearcreekspas.com Premier Collection Whirlpool Spa OWNER’S MANUAL Contents Installation ............................................................................................................. 2 Inspection and Shipping Claim................................................................................2 Positioning Your Spa ..............................................................................................2 Electrical Requirements ..............
Summary of the content on the page No. 4
www.clearcreekspas.com INSTALLATION Inspection and Shipping Claim Check for shipping damage upon receipt of the spa. Jacuzzi Whirlpool Bath is not responsible for damage to the spa sustained during shipment. If damage is evident before unpacking, refer to instructions regarding shipping claims on the outside of the carton and immediately file a claim with the carrier. Once the spa has been removed from the carton and before it is permanently installed , check the spa complete
Summary of the content on the page No. 5
www.clearcreekspas.com INSTALLATION Electrical Precautions Outdoor Installation CAUTION: Do NOT apply electrical power to the spa If you install the spa outdoors, we recommend that unless it is filled with water to the normal water level, you provide a concrete pad for it to rest on. To do this, which is approximately 7" below the spa rim (refer to construct forms for a 4" thick level pad. Install a #10 location of water level indicator on face of skimmer). If gauge wire me
Summary of the content on the page No. 6
www.clearcreekspas.com INSTALLATION Equipment Set-Up 1. Remove the plastic sheet covering the spa. NOTE: Stepping into the spa with shoes will scratch the acrylic surface. 2. Remove any packing materials from the spa. 3. Remove the filter cartridge from its plastic bag. 4. Pull open the skimmer/filter door by the handle lo- cated in the middle of the door and remove the skimmer basket. Then insert the filter cartridge into the filter housing and reinsert
Summary of the content on the page No. 7
www.clearcreekspas.com OPERATION Operating Instructions Now that your spa is in place, you are probably eager to take advantage of its unique designed-in features— ® especially the famous Jacuzzi hydromassage performance. Besides being a beautiful addition to your indoor decor or outdoor landscaping, your Jacuzzi Whirlpool Bath spa will provide you with the ultimate in spa pleasure. Familiarize yourself with the operation of the electronic control panel, as described on pages
Summary of the content on the page No. 8
www.clearcreekspas.com OPERATION The spa will automatically begin to operate when electrical power is applied. There is no ON/OFF switch for the spa system. The control system has been designed so that by connecting the spa to its properly grounded power source and pressing the mode button, the spa will function properly and safely at 100°F. When your spa is first actuated, the display will alternately flash ECON, the current spa temperature, and COOL until the spa water is
Summary of the content on the page No. 9
www.clearcreekspas.com OPERATION Mode Function Automatic Filter Cycles Pressing the button switches spa operation to Your spa will automatically filter itself for 2 hours either the ECONOMY or STANDARD mode. In the twice each day. The first filter cycle will begin 1 minute economy mode, the spa will heat only during the filter after the spa is energized. The second filter cycle will begin twelve hours after the start of the first cycle. The cycles and only wh
Summary of the content on the page No. 10
www.clearcreekspas.com OPERATION Normal Operation/Whirlpool System You can enjoy the spa with or without activating the whirlpool. Either way, bathing in your spa can be pleasurable, as well as therapeutic. After a busy, stressful day, you can look forward to soaking in your spa in still water with no turbulence—only the gentle warmth of the soothing and relaxing water. For a more invigorating spa experience, you can take advantage of the built-in whirlpool system. To do thi
Summary of the content on the page No. 11
www.clearcreekspas.com MAINTENANCE Water Quality and Water Chemistry Maintaining water quality and water chemistry in your spa is extremely important and should be a regular part of your spa maintenance program, as a neglected spa can be a breeding place for dangerous bacteria. The water quality of your spa is maintained by a combination of filtration and chemistry. The spa’s integral filter system helps maintain the water cleanliness and clarity by trapping most solid mater
Summary of the content on the page No. 12
www.clearcreekspas.com MAINTENANCE Water Chemistry (Continued) Disinfecting When filling the spa for the first time, follow the purge/sanitizing instructions in the Equipment Set-Up procedure of the Installation Instructions. Add a disinfectant to the water on a regular basis to help control the amount of bacteria, algae and organic materials. Such bacterial contaminants, if not con- trolled, could cause skin rashes or other physical prob- lems. To disinfect the s
Summary of the content on the page No. 13
www.clearcreekspas.com MAINTENANCE Skimmer Basket Maintenance Water Level/Drain The basket located in the skimmer of the spa should The water level in the spa must be maintained at its be checked at least once a week for collection of debris, normal level. Evaporation and splashing will cause the such as leaves, hair, etc., and cleaned as necessary. To water level to drop. clean the basket, remove it from the skimmer by pulling When concentrations of impurities from eva
Summary of the content on the page No. 14
www.clearcreekspas.com MAINTENANCE Automatic Filtration/Maintenance If you plan to be away, minimum water quality will be maintained by running the filter system. If you will be away for an extended period, however, we recommend that you drain the spa (following the procedure described under Winterizing on this page), as long periods without maintenance of water quality could be detrimental to the spa. Another means of maintaining minimum water quality while away for less th
Summary of the content on the page No. 15
www.clearcreekspas.com MAINTENANCE Spa Light Two filters , one blue and one red, are provided with your spa. To change the filter, simply snap the colored filters in place on top of the normal lens. Two replace- ment bulbs (GE#912, 12W, 12V) are also included. Put them in a safe place for future use. When a bulb burns out, replace it from the back of the light fitting on the outside of the shell by pulling out the bulb receptacle. LIGHT BULB REPLACEMENT LOCKING
Summary of the content on the page No. 16
www.clearcreekspas.com 13
Summary of the content on the page No. 17
www.clearcreekspas.com TROUBLESHOOTING GUIDE *NOTE: See also DISPLAY MESSAGES on page 9. PROBABLE CAUSE PROBLEM REMEDY 1. Water not clean. A. Clogged or blocked suction A. Clean strainer/skimmer. strainer or skimmer basket. B. Filter clogged (dirty). B. Clean or replace filter. C. See Chemistry section. C. Poor water chemistry. D. Insufficient filtering. D. Increase daily filtering time. E. See Maintenance section. E. Improper maintenan
Summary of the content on the page No. 18
www.clearcreekspas.com 14 www.clearcreekspas.com
Summary of the content on the page No. 19
www.clearcreekspas.com TROUBLESHOOTING GUIDE PROBLEM PROBABLE CAUSE REMEDY A. Clean strainers 5. Noisy pump and motor. A. Clogged strainer(s). B. Locate and repair leaks. B. Leakage of air into suction line. C. Tighten fasteners. C. Vibrating parts attached to motor or support brackets. D. Add water to normal level. D. Low water level. E * E. Damaged or worn motor bear- ings. F. * F. Impeller rubbing inside case. G. * G.
Summary of the content on the page No. 20
www.clearcreekspas.com 15 www.clearcreekspas.com
