Summary of the content on the page No. 1
¨
Model No. IMHS45590
Serial No.
USERÕS MANUAL
The serial number is found on a plastic
sign inside the spa behind the slotted
access panel. Write the serial number
in the space above for reference.
Access Panel
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if there are
missing parts, we will guarantee
complete satisfaction through
direct assistance from our factory.
TO AVOID UNNECESSARY
DELAYS, PLEASE CALL DIRECT
TO OUR
Summary of the content on the page No. 2
Table of Contents Posting the Warning Sign . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Choosing a L
Summary of the content on the page No. 3
Important Safety Instructions WARNING: To reduce the risk of drowning, electric shock, or serious injury, read the fol- lowing important precautions before using the hydrotherapy spa. READ AND FOLLOW ALL INSTRUCTIONS 1. It is the responsibility of the owner to ensure 10. Never insert any object into any opening. that all users of the hydrotherapy spa are 11. Do not use breakable containers in or near adequately informed of all precautions. the hydrotherapy spa. 2. Use the hydrotherapy spa only a
Summary of the content on the page No. 4
21. DANGERÑIf you will be using the hydrother- 29. WARNINGÑTo reduce the risk of injury: The apy spa outside, do not bury the power cord. water temperature should never exceed Keep the power cord away from lawn mow- 104¡F. Temperatures between 100¡F and 104¡F ers, hedge trimmers, and other similar equip- are considered to be safe for healthy adults. ment. However, if you plan to remain in the hydro- therapy spa for more than 10 to 15 minutes, a 22. WARNINGÑThe power cord is equipped with lower t
Summary of the content on the page No. 5
36. If you feel pain or dizziness at any time while 41. WARNING DECAL PLACEMENT: Locate the using the hydrotherapy spa, discontinue use decals shown below and familiarize yourself and contact a physician. with the information on the decals. 37. WARNINGÑTo reduce the risk of injury: It is especially important for persons over the age of 35 or persons with pre-existing health problems, such as obesity, heart disease, high or low blood pressure, circulatory prob- lems, or diabetes to consult their
Summary of the content on the page No. 6
Before You Begin ¨ Congratulations for selecting the new IMAGE For your benefit, read this manual carefully before RENEW 455 hydrotherapy spa. The innovative using the RENEW 455. If you have additional ques- RENEW 455 allows you to enjoy all the benefits of tions, please call our Customer Service Department hydrotherapy in the comfort and privacy of your home. toll-free at 1-877-897-7493, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). Hydrotherapy is a proven met
Summary of the content on the page No. 7
Choosing a Location for the Hydrotherapy Spa There are many factors to consider when choosing a location to set up the hydrotherapy spa. These factors vary depending on whether you plan to use the spa inside or outside. We have listed several factors you may wish to consider as you decide where to set up the spa. If you set up the hydrotherapy spa inside: If you set up the hydrotherapy spa outside: 1. The hydrotherapy spa will increase the level of 1. Check local building codes concerning the us
Summary of the content on the page No. 8
Assembly Before beginning assembly, carefully read the ASSEMBLY REQUIRES THE FOLLOWING following information and instructions: TOOLS (not included): ¥ Place all parts in a cleared area and remove the ¥ One (1) phillips screwdriver packing materials from the spa shell. Do not dis- pose of the packing materials until assembly is ¥ You may also need a small amount of soap completed and the spa is operating. or water. ¥ During assembly, make sure that all parts are A wire connector is provided on
Summary of the content on the page No. 9
3. Refer to the inset drawing. Set a Filter Gasket (33) 3 19 on top of the Filter (16). Next, press the Filter Cover (8) into the spa until it is fully seated. Then, tighten 8 the Locking Ring (19) onto the spa. 33 Remove the two warning decals (not shown) from the spa shell. Using a damp cloth, wipe the spa shell clean. Before filling the spa, make sure that it is 16 Fill to Here in the desired position and that there is room to easily service the spa. Once the spa is filled, it will have to b
Summary of the content on the page No. 10
Using the Hydrotherapy Spa The hydrotherapy spa is designed to seat five adults. TESTING AND TREATING THE WATER The spa holds 225 gallons of water and offers a heat- ing system (70¡F to 104¡F), a filtration system, ten The hydrotherapy spa comes with a starter chemical adjustable hydrotherapy jets, and a powerful whirlpool pack for maintaining the water in the spa. Disregard jet. Follow the guidelines below to use and maintain the directions on the individual packages of ÒQUICK the spa for your
Summary of the content on the page No. 11
Spa Shell Diagram H I G C J A A B D E F Refer to the diagram above. The function of each H. The filter can be removed for cleaning or replace- component is explained below. ment (see CHECKING AND CLEANING THE FIL- TER on page 13). A. The ten hydrotherapy jets provide a relaxing mas- sage action. Three of the jets are adjustable. Note: I. The console controls the spa jets, turns the under- The adjustable jets can be closed and opened by water light on and off, and adjusts the water temper- pushi
Summary of the content on the page No. 12
Using the Controls Air Control Jet Light Temperature Diverter Button Button Buttons Refer to the diagram above. The function of each Light Button: Turns the underwater light on and off. control is explained below: Temperature Buttons: Control the temperature setting Air Control: Determines the amount of air flowing of the water. The temperature can be set at 70¡F to through the hydrotherapy jets during operation. If the 104¡F. The water heats at about 1.8¡F per hour with control is turned counte
Summary of the content on the page No. 13
Maintenance The hydrotherapy spa is designed to provide years of MAINTAINING THE SPA COVER enjoyment. Please follow the guidelines below to properly maintain your spa. The spa cover should be cleaned monthly. To clean the spa cover, use water and a non-abrasive cleaner MAINTENANCE SCHEDULE on the entire cover. Rinse the cover with a garden hose to remove any cleaner residue. Dry the cover Daily entirely. Use a non-silicone-based vinyl conditioner on ¥ Check the water level and refill the spa to
Summary of the content on the page No. 14
WATER CHEMISTRY ATTACHING AND REMOVING THE ACCESS PANEL The hydrotherapy spa comes with a starter chemical To locate the access panel, refer to the drawing on pack for maintaining the water in the spa. (See TEST- page 6. To remove the access panel, first remove the ING AND TREATING THE WATER on page 10.) four indicated screws. Slide the access panel down Additional chemicals can be purchased at a pool and and then pull the bottom of it away from the spa. Be spa supply store. careful not to damag
Summary of the content on the page No. 15
To drain the hydrotherapy spa, follow the steps below: WINTER USE AND CARE 1. Using the console, adjust the temperature to the The hydrotherapy spa is designed for year-round use. lowest setting. If you decide to store the spa for the winter, store it in 2. Shut off the circuit breaker or GFCI. a warm, dry location. Follow the steps below to winter- 3. Remove the access panel from the spa. ize the spa. 4. Remove the end of the drain hose from the spa. 1. Drain the spa (see DRAINING THE HYDROTHER
Summary of the content on the page No. 16
Trouble-shooting Most problems can be solved by following the simple steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, call our Customer Service Department toll-free at 1-877-897-7493, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time. 1. SYMPTOM: THE SPA WILL NOT OPERATE tained at 70¡F, it will take approximately 24 to 36 hours for the water to reach the set temper- a. Check to see if the GFCI breaker is tripped or ature. was not tu
Summary of the content on the page No. 17
10. SYMPTOM: THE SPA JET UNIT CONTINUES 12. SYMPTOM: THE CONSOLE DISPLAYS THE TO RUN AFTER IT HAS BEEN SHUT OFF WORDS ÒCOOLÓ OR ÒICEÓ a. To turn the spa jets on low, press the jet button a. This is a normal function of the spa; no action once. To turn the spa jets on high, press the jet is necessary. The word ÒCOOLÓ will appear in button twice. To turn the spa jets off, press the the display if the temperature of the water is button three times. The spa jets will remain off more than 20¡F cooler
Summary of the content on the page No. 18
R0300A Part ListÑModel No. IMHS45590 Key No. Qty. Description Key No. Qty. Description 1 1 Compression Fitting Assembly 26 3 Push/Pull Movable Jet 2 1 Access Panel 27 1 Drain Plug 3 1 Whirlpool Jet 28 1 Drain Plug O-ring 4 1 Inflatable Cover 29 1 Air Vent 5 4 #8 x 5/8Ó Screw 30 6 Buckle 6 2 Removable Collar 31 12 #4 x 3/4Ó Screw 7 4 #6 x 1 1/4Ó Wood Screw 32 1 Air Vent O-ring 8 1 Filter Cover w/O-ring 33 2 Filter Gasket 9 1 Spa Shell 34 1 Air Control Knob 10 3 1/4Ó Whirly Jet 35 4 1/4Ó x 1 1/4Ó
Summary of the content on the page No. 19
R0300A Exploded DrawingÑModel No. IMHS45590 11 35 22 20 13 24 13 28 27 4 29 21 19 32 8 33 16 7 12 7 25 33 2 5 34 6 14 9 12 6 5 26 15 10 3 23 10 18 18 17 26 1 10 31 30 19
Summary of the content on the page No. 20
Ordering Replacement Parts To order replacement parts, simply call our Customer Service Department toll-free at 1-877-897-7493, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). To help us assist you, please be pre- pared to give the following information when calling: 1. The MODEL NUMBER of the product (IMHS45590) ¨ 2. The NAME of the product (IMAGE RENEW 455) 3. The SERIAL NUMBER of the product (see the front cover of this manual) 4. The KEY NUMBER and DESCRIPT
