Attwood 5080 user manual

Device: Attwood 5080

Category: Marine Lighting

Manufacturer: Attwood

Size: 0.51 MB

Added : 10/9/2013

Number of pages: 2

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Attwood 5080. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Attwood 5080.

For your convenience

If looking through the Attwood 5080 user manual directly on this website is not convenient for you, there are two possible solutions:

Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Attwood 5080 on full screen, use the button Fullscreen.
Downloading to your computer - You can also download the user manual Attwood 5080 to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.

Attwood 5080 User manual - Online PDF

« Page 1 of 2 »

Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Attwood 5080 but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Attwood 5080. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents

Summary of the content on the page No. 1

INSTALLATION, DECK MOUNT
®
All-Round Lights
1. To access mounting holes, gently twist lens helmet counterclockwise
to remove.
3
2. Place light in position as shown in Figure 1.
Important: Before drilling, be sure that light will shine within 5° of
12-Volt
horizontal when boat is floating.
3. Mark and drill 3/4" (19mm) diameter hole. (Figure 3)
Navigation Lights
4. Thread wire leads and base stem into hole. Mark location of screw
holes. Proceed to Step 5 below.
All-Round Li

Summary of the content on the page No. 2

INSTALLATION, RAISED BASE MOUNT FINAL WIRING All-Round Lights CAUTION: 1. Place light in position as shown in Figure 1. Power source must be positive 12V DC only. All positive (+12V DC) wires must be fused to protect the circuit. Attwood Pulsar Navigation Important: Before drilling, be sure that light will shine within 5° of Lights require a 1-amp fuse. Failure to make proper connections and horizontal when boat is floating. fusing will void product warranty. 2. Mark and drill 3/8" (10mm) di

Alternative user manuals

#	User manual	Category	Download
1	Attwood 3500 Series User manual	Marine Lighting	0
2	Attwood 3540 User manual	Marine Lighting	0
3	Attwood 3120 User manual	Marine Lighting	0
4	Attwood 3134 User manual	Marine Lighting	0
5	Attwood 3530 User manual	Marine Lighting	0
6	Attwood 3104 User manual	Marine Lighting	0
7	Attwood 3560 User manual	Marine Lighting	0
8	Attwood 3130 User manual	Marine Lighting	0
9	Attwood 3154 User manual	Marine Lighting	0
10	Attwood 3810 User manual	Marine Lighting	0
11	Attwood 3831 User manual	Marine Lighting	0
12	Attwood 5045 User manual	Marine Lighting	0
13	Attwood 3838 User manual	Marine Lighting	0
14	Attwood 3830 User manual	Marine Lighting	0
15	Attwood 3800 Series User manual	Marine Lighting	0
16	ACR Electronics SM-2 User manual	Marine Lighting	0
17	ACR Electronics 1933 User manual	Marine Lighting	0
18	ACR Electronics MS-2000(M) User manual	Marine Lighting	3
19	ACR Electronics 3940.1 User manual	Marine Lighting	1
20	ACR Electronics RCL-300A User manual	Marine Lighting	1