Summary of the content on the page No. 1
Mobile Phone
Operating Instructions
ezy100 GSM Mobile Phone with
Emergency Call Function
Summary of the content on the page No. 2
Summary of the content on the page No. 3
Table of contents Safety Information and Warnings ................................... 4 Getting Started .............................................................. 9 Your Oricom phone and controls .................................. 19 Telephone Operation .................................................... 24 Call Functions .............................................................. 32 Emergency Call Function.............................................. 37 Emergency Call Function, Example
Summary of the content on the page No. 4
Safety Information and Warnings 1 Safety Information and Warnings It is very important that you read the User Guide carefully as it contains detailed information on set up and operational issues which you will need to be aware of to ensure the mobile operates properly. If you are not clear about how to use the phone or have any queries on any issue, please contact our Australian Customer Support helpline on 02 45748888. The following is a list of some of the important issues and importa
Summary of the content on the page No. 5
Safety Information and Warnings YOU SHOULD NEVER RELY SOLEY ON ANY MOBILE PHONE FOR ESSENTIAL COMMUNICATIONS SUCH AS MEDICAL EMERGENCIES. Areas of use • Do not use the phone in prohibited areas such as on aircraft, in a petrol station in hospitals, or near to fuel and other fl amable liquids, chemicals or blasting areas. • When using this phone in a motor vehicle do not carry or store fl ammable liquids, gasses or explosives in the same compartment as this phone. • Prevent exposure to smok
Summary of the content on the page No. 6
Safety Information and Warnings • Keep the phone and accessories out of the reach of children. • The SIM card can be removed. Caution! Small children can swallow them. • The earpiece of the handset may attract small metal objects such as staples and pins. Care should be taken when placing the handset near these items. • The ringing tone is issued via the loudspeaker. Take an incoming call fi rst and then hold the phone to your ear. This prevents any possible hearing damage. • You should not
Summary of the content on the page No. 7
Safety Information and Warnings possible interference. If you have had a pacemaker implanted, do not carry the phone in a breast pocket when switched on. Always hold the phone to the ear furthest away from the pacemaker during calls. Switch the phone off immediately if you notice or suspect any adverse effects. • Ensure you read and follow the directions from the manufacturer of the implanted medical device. If you have any questions about using your phone with an implanted medical device
Summary of the content on the page No. 8
Safety Information and Warnings AC power adaptor Attention: Only use the AC power adaptor supplied. As other power supplies could damage the phone. Rechargeable batteries Attention: Never dispose of batteries into a fi re. Only use batteries of the same type. Environment At the end of its service life, in order to dispose of your device, take it to a collection point if provided by your local public waste authorities (e.g. recycling centre). The adjacent symbol indicates that the device m
Summary of the content on the page No. 9
Getting Started 2 Getting Started Safety information Attention: It is essential to read the Safety Information in Chapter 1 before starting up. Checking the package contents The package contains: 1 mobile phone 1 Li-ion battery pack 1 AC power adaptor Barcode labels on the phone The barcode label printed inside the phone contains the IMEI number and the serial number. Do not remove it. Phone security Every mobile phone has a unique 15-digit electronic serial number, known as the Internation
Summary of the content on the page No. 10
Getting Started You can verify your IMEI number by dialling *#06# on your mobile phone. If your phone is lost or stolen: Notify your network carrier and the police immediately. Tell them your IMEI number and any other identifying features on your phone. Your network carrier can use this number to block your phone from all networks in Australia once you report the phone lost or stolen, making it useless to any thief. Importantly, this also ensures you’re not paying for any calls made by t
Summary of the content on the page No. 11
Getting Started PIN & PIN2 codes The PIN (Personal Identity Number) and PIN2 codes are 4 to 8-digit numbers. The PIN and PIN2 codes are given to you, together with the SIM card, by your network provider. PUK & PUK2 codes The PUK (Personal Unblocking Key) and PUK2 codes are 4 to 8-digit numbers. These are only necessary if you enter the PIN code for the SIM card incorrectly three times in succession and the SIM card is blocked. The PUK and PUK2 codes are given to you, together with the SI
Summary of the content on the page No. 12
Getting Started Installing the SIM card Risk of swallowing small objects! The SIM card can be removed. Small children can swallow them. The emergency call number 000 can still be dialled even if there is no SIM card installed. The number is automatically dialled if the emergency call switch is activated! Switch the phone off. Pay attention that the SIM card is not bent or scratched. Prevent any contact with water, dirt or electrical charges. Slide off the mobile phone’s 1 battery compartme
Summary of the content on the page No. 13
Getting Started Slide the SIM card with the gold coloured contacts facing down in the moulded SIM card holder. Insert the battery. The gold coloured contacts on the 1 battery must face towards 2 the top left. Press lightly on the bottom end of the battery until it snaps into place. Replace the battery compartment cover back on 1 the phone. Slide the battery compartment cover upwards 2 until it snaps in to place. 13
Summary of the content on the page No. 14
Getting Started Charging the battery Before starting to charge the battery, ensure that it has been installed properly. Do not remove the battery while it is being charged. This could damage the phone. When charging the battery for the fi rst time, it should be charged for at least 4 hours. Batteries only reach their full capacity after several complete charge/discharge cycles. Charging via the mini USB port Open the protective USB cover on the phone and plug the charging unit in the mini
Summary of the content on the page No. 15
Getting Started Charging via the optional desktop charger Plug the connector on the AC adaptor cable in the mini USB port on the desk top charger. Place the phone into the charging cradle. The current battery charge status is shown in the display as follows: Full Half empty Low Empty It may take a few seconds before the phone indicates the charging process. You can use the phone during the charging process. You can also charge the phone via a PC. To do this, connect the phone to the PC usi
Summary of the content on the page No. 16
Getting Started Battery status warning When the battery charge is low, a warning message appears in the display. Charge the battery. In cases where the battery charge is extremely low, it is possible that the back-lighting no longer works and certain functions are no longer available. Charge the battery. When the battery charge drops below the minimum status, the phone switches off automatically. Warnings on battery usage Only use batteries, cables and charging units approved by Oricom, oth
Summary of the content on the page No. 17
Getting Started Keep the battery contacts clean and free of dust and dirt. The battery can be charged/discharged hundreds of times but its service life is limited. Replace the battery when the battery no longer holds suffi cient charge for normal use. The Oricom battery part number is KEBT- 5057, maximum talk time is up to 120 minutes and standby time is up to 170 hours. Switching the mobile phone off and on Press and hold the button for 3 seconds to switch the phone on or off. Setting the
Summary of the content on the page No. 18
Getting Started Setting the time and date 1. During standby mode, press M1 to enter the setup menu. 2. Use / to select Clock & Alarm. Press M1 to confi rm. 3. Use / to select Time & Date, press M1 to confi rm. Set Home City 4. Use / to select Set Home City, press M1 to confi rm. Use / to select and press M1 to confi rm. Set Format 5. Use / to select Set Format, press M1 to confi rm. Use / to select and press M1 to confi rm. Set time format to 24Hr or 12 Hr, and select the date fo
Summary of the content on the page No. 19
Your Oricom phone and controls 3 Your Oricom phone and controls 19 14 15 1 8 9 10 2 3 7 11 4 6 5 13 12
Summary of the content on the page No. 20
Your Oricom phone and controls 1 Earpiece 2 One-touch dialling buttons / Softkeys 3 On/Off button / On-hook button 4 Scroll up/down button 5 Microphone 6 Digit keys 7 Call button 8 LED 9 Loudspeaker for handsfree mode 10 Emergency call switch 11 Battery compartment cover 12 Mini USB port with cover 13 Charge contacts 14 Volume control 15 Headset socket 20
