Summary of the content on the page No. 1
AUTOMATIC JUICE MACHINES
®
OPERATION MANUAL
For Models JX15MC, JX15AC, JX15ACS, JX28MC,
JX28MCB, JX28AC, JX45AF, JX45AFR
Prior authorization must be obtained from Grindmaster-Cecilware™
for all warranty claims.
GRINDMASTER-CECILWARE™
Aug 2010
4003 Collins Lane
Part # NS40A Revision B
Louisville, KY 40245 USA
0810 Form # CW-302-02
Phone:+1.502.425.4776
800.695.4500 (USA & Canada Only)
800.568.5715 (Technical Service Only)
Fax: +1.502.425.4664
Email: ts@grindmaster.com
™
© 2010 GRINDMASTER-CECILWA
Summary of the content on the page No. 2
Contents Model Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Setup Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Cleaning . . . . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 3
Model Specifications Fruit Output Feeder Flow Rate Dimensions Ship Model Electrical / Min Capacity / Min (H x W x D) Weight 25 oz. - 45 oz. 33'' x 19.3'' x 17.7'' 111 lbs. JX15MC 15 6 Orange 120V, .55KW, 9A (.7 L - 1.3 L) (84 cm x 49 cm x 45 cm) (51 kg) 13 lbs. 34 oz. - 66 oz. 36.6'' x 19.3'' x 17.7'' 119 lbs. JX15AC 15 120V, .55KW, 9A (6 kg) (1 L - 2 L) (93 cm x 49 cm x 45 cm) (54 kg) 13 lbs. 34 oz. - 66 oz. 36.6'' x 19.3'' x 19.7'' 120 lbs. JX15ACS 15 120V, .55KW, 9A (6 kg) (1 L - 2 L) (93 cm x
Summary of the content on the page No. 4
General Information Please closely follow the instructions indicated in this manual to achieve the maximum performance from your Cecilware JX Automatic Fruit Juice Machine. Before setting up the machine, please make sure all the people authorized to use the machine have read through this manual. Please keep this manual in a clean dry place near the machine so it is accessible. All the components of the machine that are in contact with fruit juice should be sanitized in accordance with the requir
Summary of the content on the page No. 5
Setup Procedures JX28MC / JX28MCB Remove the pulp strainer and front cover. Connect the feeder tube and replace the pulp strainer and front cover. Connect the peel buckets and the drip tray. JX28AC Connect the auto feeder to the top of the machine and remove the pulp strainer and front cover. Connect the feeding hose and replace the pulp strainer and front cover. Connect the peel buckets and the drip tray. JX45AF Follow the steps above for the JX28AC. Place the machine on the floor stand, then co
Summary of the content on the page No. 6
Setup Procedures JX45AFR Follow the steps on page 5 for the JX45AF. Connect the caddy as illustrated. Before connecting the machine, please read the electrical information printed on the machine data plate. Make sure electrical supply matches the machines requirement. Plug the machine into a grounded electrical outlet. NEMA 5-15R Warnings • Don’t operate the machine without verifying that all the parts have been assembled and connected. • The machine will not operate without the front cover atta
Summary of the content on the page No. 7
Operation Depending on the model, add fruit to either the feeding tube or the auto feed carousel. TO BEGIN PROCESSING FRUIT: Press the switch on the upper right side of the machine (Position I). JX15ACS / JX45AF / JX45AFR: Once the machine has been started, press the faucet handle to activate the squeezing process. TO STOP PROCESSING FRUIT: Stop the machine by pressing the 0 red button on the upper right side of the machine. JX15ACS / JX45AF / JX45AFR: Close the faucet and then press the 0 red b
Summary of the content on the page No. 8
Cleaning Remove the pulp strainer. JX15MC / JX15AC / JX15ACS / JX28MC / JX28MCB / JX28AC: Empty the peel bucket. JX45AF / JX45AFR: Remove the down tubes. Remove the front cover. JX15MC / JX15AC / JX15ACS JX28MC / JX28MCB / JX28AC JX45AF / JX45AFR JX15MC / JX15AC / JX15ACS Remove the positioner, pushing it upwards. Remove the knife by unscrewing the knife screw (CAUTION! KNIFE IS SHARP). Remove the squeezer male part by unscrewing the screw. Remove the squeezer drum by unscrewing the screw. Remov
Summary of the content on the page No. 9
Cleaning JX28MC / JX28MCB / JX28AC JX45AF / JX45AFR Unscrew the five thumbscrews of the squeezing system parts. Remove the two squeezing drums, the two male parts and the knife by pulling outwards. (CAUTION! KNIFE IS SHARP) For models with auto feeder: First remove the metal basket, then the carousel by unscrewing the screw towards the right. Clean all parts and the body of the machine with water and detergent. Do Not Use Abrasive Cleaning Products, they can damage the parts. Dry the parts and th
Summary of the content on the page No. 10
GRINDMASTER-CECILWARE™ 4003 Collins Lane Louisville, KY 40245 USA Phone: +1.502.425.4776 800.695.4500 (USA & Canada Only) 800.568.5715 (Technical Service Only) Fax: +1.502.425.4664 Email: ts@grindmaster.com www.grindmaster.com
