Summary of the content on the page No. 1
Summary of the content on the page No. 2
WARNINGS This CD player is made and tested to meet WARNING: TO REDUCE THE RISK OF exacting safety standards. It meets FCC FIRE OR SHOCK HAZARD, DO NOT EXPOSE requirements and complies with safety THIS PRODUCT TO RAIN OR MOISTURE. performance standards of the U.S. Department of Health and Human Services. Warnings: CAUTION ! This CD player employs a laser light beam. RISK OF ELECTRIC SHOCK Only a qualified service person should DO NOT OPEN remove the cover or attempt to service this CAUTI
Summary of the content on the page No. 3
WARNINGS NOTE: This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulations of Industry Canada. These limits are designed to provide reasonable protection against harmful Nterference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communica
Summary of the content on the page No. 4
IMPORTANT SAFETY INSTRUCTIONS 13. Power-Cord Protection - Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product. 14. Protective Attachment Plug - The product is equipped with an attachment plug having overload protection. This is a safety feature. See Instruction Manual for replacement or resetting of
Summary of the content on the page No. 5
INTRODUCTION Your Pedestal CDG Karaoke System will provide you with fun and entertainment. It can let you be the “star” as you sing along with your favorite recordings and hear your voice with the music through the system’s speaker. This karaoke center is compact and designed to include many features, yet it is easy to use. After just a few simple instructions, you will become an expert. Before you attempt use your unit, please read this manual thoroughly to familiarize yourself with all the
Summary of the content on the page No. 6
INSTALLATION STEP 1 1. Join the speaker (middle) into the stand (bottom) according to the installation illustration. 1 2 STEP 2 2. Tighten a self tapping screw at the bottom of the speaker (middle). 5
Summary of the content on the page No. 7
INSTALLATION STEP 3 3. Join the control panel (top) into the speaker (middle) according to the installation illustration. 2 A B 1 A B A B Following the labels (A to A & B to B) to plug the connectors. STEP 4 4. Tighten a self tapping screw at the control panel (top). 6
Summary of the content on the page No. 8
CONTROL LOCATIONS See control locations as indicated on the next few pages. FRONT VIEW WIRELESS MICROPHONE REAR VIEW SIDE VIEW 7
Summary of the content on the page No. 9
CONTROL LOCATIONS 1 2 3 20 21 22 4 23 24 5 25 6 26 27 7 28 8 29 9 30 10 11 31 12 32 13 33 14 15 34 16 35 17 18 36 19 FRONT VIEW 1. Camera Lens Open 13. Monitor 25. RANDOM Button Button 14. BALANCE Control 26. SKIP Button 2. Adjustable Camera Lens 15. MIC Holder 27. SKIP Button 3. ON/OFF Button 16. ECHO Control 28. OPEN/CLOSE Point 4. ON/OFF LED 17. MIC VOLUME Control 29. PLAY/PAUSE Button 5. Monitor Selector 18. MIC 1 Jack 30. STOP Button 6. Video Out Selector 19. HEADPHONE Jack 31. TUNING Knob
Summary of the content on the page No. 10
CONTROL LOCATIONS 37 39 38 REAR VIEW 37. BRIGHTNESS Control 39. VERTICAL HOLD Control 38. CONTRAST Control 9
Summary of the content on the page No. 11
CONTROL LOCATIONS 44 40 45 41 46 42 47 43 SIDE VIEW 40. VIDEO IN Jack 44. Speaker 41. AUX INPUT Jack (R) 45. AUX INPUT Jack (L) 42. AUX OUTPUT Jack (L) 46. VIDEO OUT Jack 43. AC Power Cord Jack 47. AUX OUTPUT (R) 10
Summary of the content on the page No. 12
CONTROL LOCATIONS 51 48 52 49 50 WIRELESS MICROPHONE 48. ON Position 51. LED Indicator 49. OFF Position 52. STANDBY Position 50. Battery Compartment 11
Summary of the content on the page No. 13
MAKING THE CONNECTIONS CONNECTING POWER You can power the system from a standard AC outlet by using the supplied power cord. CAUTION: The supplied AC power cord has a polarized plug that fits into the wall outlet only one way. If the plug does not fit properly, turn it over and try again. Do not force it. CONNECTING TO YOUR HEADPHONE A headphone jack is provided for using headphones instead of the built-in speaker. (Headphones are sold separately.) CONNECTING TO YOUR TV The Singing Machine pro
Summary of the content on the page No. 14
MAKING THE CONNECTIONS If your television or VCR does not have the required Video Input, you will need an RF Modulator (Radio Frequency Modulator), which connects through your TV Antenna or cable line and serves as Video Input. An RF Modulator can be purchased at almost any consumer electronics retailer. If you are connecting the video from the Singing Machine to either a television or a VCR video input jack, you must specify the source the TV or VCR is to display. Your TV or VCR user guide
Summary of the content on the page No. 15
MAKING THE CONNECTIONS CONNECTING A VIDEO COMPONENT FOR INPUT Please follow the steps below to display CDG lyrics on the Singing Machine’s monitor from another video source: (1) Locate the multicolored patch cords. (2) Connect video cable (yellow) to the Video In of the side of the Singing Machine. (3) Connect the other end of the video cable (yellow) to the Video Output on another video source such as a VCR. (4) Set the Function Selector to AUX mode and the Monitor Selector to AUX. (5) Adjust
Summary of the content on the page No. 16
MAKING THE CONNECTIONS CONNECTING AN AUDIO COMPONENT FOR INPUT To connect another audio source (such as a Tuner, an AV Receiver or a VCR) so you can sing along with its music, simply connect the Audio Output jacks (Red & White RCA jacks) to the Singing Machine’s AUX IN L & R jacks. SIDE VIEW OF ANOTHER SINGING MACHINE AUDIO COMPONENT R L VIDEO OUT AUDIO OUT AUX INPUT L (WHITE JACK) AUX INPUT AUDIO OUTPUT AUDIO OUTPUT R R L (RED JACK) (RED JACK) (WHITE JACK) MONITOR SELECTOR ! To play a CDG di
Summary of the content on the page No. 17
CD OR CD+G OPERATION D Warning - Tapping or dropping the microphone while it is on can permanently damage your microphone. Resist the urge to swing the microphone around by the cord! PREPARATION ! This unit is designed to play CD’s bearing the identification logo " ". If CD’s do not conform to the CD standard, they may not play properly. ! Fingerprints and dust should be carefully wiped off with a soft cloth. Wipe in a straight motion from the center of the disc to the outside edge. !
Summary of the content on the page No. 18
CD OR CD+G OPERATION PLAY/PAUSE MODE ! To start playing, press the PLAY/PAUSE button. The first track [ ] and the PLAY/PAUSE LED will be lit. ! To temporarily stop playing, press the PLAY/PAUSE button. The PLAY/PAUSE LED Indicator will flash. ! To resume play, press this button again. PLEASE NOTE: Pressing pause when a CDG is playing may cause distorted lyrics on the monitor. Any distortion will remain until the whole screen is refreshed during an instrumental break or you stop the song an
Summary of the content on the page No. 19
RADIO AND OTHER OPERATIONS AM/FM RADIO 1. Press the ON/OFF button. 2. Switch Function Selector to RADIO position. 3. Switch Band Selector to either AM or FM radio position. 4. Turn tuning knob to select desired station as indicated on dial. 5. Adjust Master Volume to your pleasure. 6. To turn the radio off, set Function Selector to CDG or AUX position. SING ALONG - RADIO 1. Follow operating instructions for AM/FM radio. 2. Connect the supplied Microphone to either one of the Mic input jacks. 3.
Summary of the content on the page No. 20
WIRELESS MICROPHONE INFORMATION Warning: Modifying, tampering and adjustment to this unit or replacement of any transmitter component (crystal, semiconductor, etc.) to this unit that could result in a violation of the rules. FCC NOTICE This wireless microphone system complies with Part 90 of FCC Rules. There is one frequency available for the system. You must get a licence for the frequency you plan to use before you use the system. Please look for this website http://wireless.fcc.gov/uls/ t
