Summary of the content on the page No. 1
P3PC-E807-01ENC2
FUJITSU TWAIN 32 Scanner Driver
® ®
Scanner Utility for Microsoft Windows
Version 9.12
User's Guide
® ® ® ®
For Use with Microsoft Windows 98, Windows Me, Windows 2000
®
and Windows XP
® ®,
(* For Windows 95 and Windows NT 4.0, refer to Version 8.12 User’s Guide.)
Summary of the content on the page No. 2
Introduction ® ® Thank you for purchasing the "Scanner Utility for Microsoft Windows V9.12". This software contains a TWAIN-compliant image scanner driver (simply called "driver" in this guide) and utilities. This guide provides a description summary of the driver, as well as a description of the installation method and procedures for appropriate use. Please read this guide before starting to use the software. In addition, read the README.TXT file on the CD-ROM for the latest information
Summary of the content on the page No. 3
Trademarks Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation in the United States and/or other countries. Intel, MMX, Pentium are registered trademarks of Intel Corporation. Adobe, Acrobat are the trademarks or registered trademarks of Adobe Systems Incorporated. ISIS, QuickScan and their respective logos are registered trademarks of Pixel Translations, a division of Captiva Software Corporation in the United States. Adaptec is a registered trademark o
Summary of the content on the page No. 4
Organization This manual explains how to install and use this driver, and how to use the TWAIN scanning utility. • Installation This section explains the procedure for installing the environments in which this driver may operate. • Using the Driver This section explains how to use the driver. • Using the Gamma Pattern Editor Use of the Gamma Pattern Editor is explained • Using the Scanners and Cameras This section explains about the property of “Scanners and Cameras” • Troublesho
Summary of the content on the page No. 5
Contents 1. Outline .............................................................................................. 1 1.1 Characteristics of this Driver...........................................................................1 1.2 Operating Environment...................................................................................1 1.3 Explanatory Notes ..........................................................................................2 1.4 Explanation of terms...................
Summary of the content on the page No. 6
4.7.6 Filter.....................................................................................................................48 4.7.7 Compression........................................................................................................52 4.8 Setting Advance Options ..............................................................................53 4.8.1 Gray .....................................................................................................................5
Summary of the content on the page No. 7
7.2 Device Trouble Related to Operation..........................................................103 7.3 Device Trouble Related to Installation ........................................................104 8. Appendix ...................................................................................... 105 8.1 Relevant Image Scanner Specification.......................................................105 8.2 Maintenance Service ..................................................................
Summary of the content on the page No. 8
1. Outline 1.1 Characteristics of this Driver • This driver complies with TWAIN regulations V1.9 (the latest version as of April 2003), which are global standards for image scanners. The driver can be used in all TWAIN- compliant applications. • This driver also supports an image scanner that has the "double-sided scan" function. If the application supports continuous scan, a double-sided document can be scanned. 1.2 Operating Environment This driver can be used in the following syste
Summary of the content on the page No. 9
® ® − Microsoft Windows XP • USB port • RAM: 32 MB or more (a minimum of 64 MB is recommended) • Available hard disk space: 10 MB or more (excluding the area for storing images) • CD-ROM drive (required for installation) • Mouse (recommended) 1.3 Explanatory Notes The descriptions in this manual are prepared based on the following rules: ◊ Menus and buttons The menus and buttons used in the program description are enclosed in []. Example: [File] menu [OK] button ◊ Keyboard The ke
Summary of the content on the page No. 10
◊ Notes on operation procedures If some menus need to be operated in a certain order, the procedural order is described as follows: [A] - [B] - [C] In accordance with this description, operation [A] is executed first, followed by [B] and [C] in that order. ◊ Figures ® ® Figures and screen operations in this guide refer to Microsoft Windows 2000. They are also followed when using other operating systems. Note that the expressions may vary with the type of scanner connected. 1.4 Exp
Summary of the content on the page No. 11
2. TWAIN 2.1 TWAIN TWAIN is the specification that defines the standard software protocol and application programming interface (API) for data exchange between a software application program and an image input device such as the image scanner. [TWAIN development background] In the past, development of a new scanner inevitably required the development of a compatible driver and a sample (demonstration) program exclusively designed for the new scanner. As the scanner is upgraded, the dr
Summary of the content on the page No. 12
2.2 TWAIN Application TWAIN mainly applies to the following three software components: Application software Source manager Source The components are related to each other as shown below. Application software (photo retouching software, etc) Source manager (TWAIN.DLL/TWAIN_32.DLL, etc) Source (Image scanner control of the driver, etc) Image scanner, etc. Figure TWAIN Application 5
Summary of the content on the page No. 13
3. Installation 3.1 Preparation 1. Make sure that the operating system (OS) is installed correctly. 2. In case of the SCSI connection, confirm that the SCSI adapter is connected to your PC and operating correctly. In case of the USB connection, confirm that the USB port is installed in your PC. 3. Confirm that the hard disk that is the installation destination has enough free space. 4. If old version FUJITSU TWAIN 32 Driver has already been installed on your PC, uninstall it before insta
Summary of the content on the page No. 14
3.2 Installing the Scanner Driver ® The Windows XP screen samples are shown below. The screen and operations will differ slightly depending on the OS that is being used. 1. Turn on the scanner. ® 2. Turn on your PC and Log on to Windows . ® ® When using Windows 2000 or Windows XP, log on as an administrator. The scanner may be detected automatically, and the "Found New Hardware Wizard" (or “Add New Hardware Wizard”) window is displayed. In this case, click [Cancel] button to cl
Summary of the content on the page No. 15
® In case of Windows 2000 ® In case of Windows XP 3. Insert the Setup CD-ROM into the CD-ROM drive. is displayed. This Dialog is not displayed automatically when "Auto play" setting of your PC is off. In this case, please run “Install.exe” in this CD-ROM directly using “Explore” or “My computer”. 8
Summary of the content on the page No. 16
4. Click [INSTALL PRODUCTS]. (* Depending on the scanner model, the different screen may appear.) 5. Click [TWAIN Driver] (* Depending on the scanner model, the different screen may appear.) Depending on the scanner model, the screen which confirms whether “Error Recovery Guide” is installed or not is displayed. In this case, click [OK] button, and install Error Recovery Guide. 9
Summary of the content on the page No. 17
6. Select the language you use in [Choose Setup Language], then click [OK] button. 7. Click [Next >] button. 8. Read the information of README File, and then click [Next >] button. 10
Summary of the content on the page No. 18
9. Read the License Agreement carefully, and then click [Yes] button if you agree. If you click [No] button, the installation is stopped. 10. Confirm Destination Folder, and then click [Next >] button. Usually, it is not necessary to change Destination Folder. 11. Confirm Components you install, and then click [Next >] button. Usually, it is not necessary to change the selection of Components. 11
Summary of the content on the page No. 19
12. Confirm Program Folder, and then click [Next >] button. Usually, it is not necessary to change the Program Folder’s name. 13. Click [Next >] button, and copying files is started. 14. Select “Yes, I want to restart my computer now”, and then click [Finish] button. 15. After the restart, the scanner is detected. Depending on the OS, the following operations may be required. 12
Summary of the content on the page No. 20
® In case of Windows 98 ® There is a request to insert a disc. When this happens, insert the Windows 98 CD-ROM in your CD-ROM drive. ® In case of Windows 2000 [Digital Signature not Found] is displayed, click [Yes] button. ® In case of Windows XP 1) [Found New Hardware Wizard] is displayed, click [Next >] button. 2) If [Hardware Installation] is displayed, click [Continue Anyway] button. 3) Click [Finish] button when the installation is finished. 13
