Summary of the content on the page No. 1
P3PC-1692-02ENZ0
fi-4860C2 Image Scanner
Operator's Guide
Summary of the content on the page No. 2
Summary of the content on the page No. 3
INTRODUCTION Thank you for purchasing the fi-4860C2 Duplex Color Scanner. The fi-4860C2 is an image scanner designed to scan small to double letter documents in large quantities. FUJITSU fi series image scanners are known for high reliability and this scanner is no exceptions. The fi-4860C2 is designed to give you the best results for your production scanning needs. The fi-4860C2 has the following features. High speed, high quality color scanning capabilities Scans documents of Letter/A4 siz
Summary of the content on the page No. 4
5. SOLVING COMMON PROBLEMS This chapter describes how to remedy document jams, scanner troubleshooting, and items to check before contacting the agent where you bought the scanner, and how to check device labels. 6. ADF DOCUMENT SPECIFICATIONS This chapter describes documents that can be used with this scanner. 7. OPERATOR PANEL MENUS This chapter describes Setup-mode and Test-mode. 8. OPTIONS This chapter describes the options available for this product. 9. SCANNER SPECIFICATIONS This chapter
Summary of the content on the page No. 5
■ Regulatory Information FCC Regulations This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interfer
Summary of the content on the page No. 6
Canadian DOC Regulations This digital apparatus does not exceed the Class B limit for radio noise emissions from digital apparatus set out in the Radio interference Regulations of the Canadian Department of Communications. This Class B digital apparatus complies with Canadian ICES-003. Le présent appareil numérique n'émet pas de parasites radioélectriques dépassant les limites applicables aux appareils numériques de la classe B et prescrites dans le Règlement sur le brouillage radioélectriqu
Summary of the content on the page No. 7
About the use of mercury Lamp(s) inside this product contain mercury and must be recycled or disposed of according to local, state, or federal laws. g H To avoid unexpected injuries; •Do not put the substance contained in the lamp in your mouth as it has mercury. •Do not breathe the chemical liquid contained in the scanner lamps. •Do not incinerate, crush, or shred the lamps or scanner parts. Illegal Copying Reproducing bills, coins, government securities and passports, licenses issued by pub
Summary of the content on the page No. 8
How Trademarks Are Indicated In This Manual References to operating systems (OS) are indicated as follows: ® ® Windows 95: Microsoft Windows 95 operating system. ® ® Windows 98: Microsoft Windows 98 operating system. ® ® Windows Me: Microsoft Windows Millennium Edition operating system. ® ® Windows 2000: Microsoft Windows 2000 Professional operating system. ® ® Windows XP: Microsoft Windows XP Professional operating system, and ® ® Microsoft Windows XP Home Edition operating
Summary of the content on the page No. 9
■ Note, Liability READ ALL OF THIS MANUAL CAREFULLY BEFORE USING THIS PRODUCT. IF THIS PRODUCT IS NOT USED CORRECTLY, UNEXPECTED INJURY MAY BE CAUSED TO USERS OR BYSTANDERS. Also, store this manual in a convenient and safe place so that it can be easily referred to during use of this product. While all efforts have been made to ensure the accuracy of all information in this manual, PFU assumes no liability to any party for any damage caused by errors or omissions or by statements of any kin
Summary of the content on the page No. 10
■ Preface Safety Precautions This manual describes important details for ensuring the safe and correct use of this product. Thoroughly read this manual before you start to use this product. In particular, be sure to read and fully understand the Safety Precautions described in this manual before you use this product. Warning Indications Used In This Manual This manual uses the following indications to ensure safe and correct use of this product, and to prevent possible danger and injury to t
Summary of the content on the page No. 11
Symbols Used In This Manual This manual uses the following symbols in explanations in addition to warning indications. This symbol alerts operators to particularly important informa- ATTENTION tion. Be sure to read this information. This symbol alerts operators to helpful advice regarding operation. HINT A TRIANGLE symbol indicates that special care and attention is required. The drawing inside the triangle shows the specific caution. A CIRCLE with a diagonal line inside shows action which us
Summary of the content on the page No. 12
Screen Examples In This Manual The screen examples in this manual are subject to change without notice in the interest of product improvement. If the actual displayed screen differs from the screen examples in this manual, operate by following the actual displayed screen while referring to the User's Manual of the scanner application you are using. Furthermore, the screenshots in this manual are for the FUJITSU TWAIN32 scanner driver, ScandAll 21 Image Capturing Utility Software, FUJITSU ISI
Summary of the content on the page No. 13
■ Safety Precautions WARNING The following describes important warnings described in this manual. Do not touch the Power cable with wet hands. Do not touch the power plug with wet hands. Doing so might cause electric shock. Do not damage the Power cable. A damaged Power cable might cause fire or electric shock. Do not place heavy objects on Power cables, or pull, bend, twist, heat, damage or modify AC cables. Also, do not use damaged AC cables or power plugs, and AC cables or power plugs when
Summary of the content on the page No. 14
Use this scanner only at the indicated power voltage. Do not connect to multiple-power strips. Use this scanner only at the indicated power voltage and current. Improper power voltage and current might cause fire or electric shock. Also, do not connect to multiple-power strips. Wipe any dust from the power plug. Wipe off any dust from metal parts on the power plug or metal fittings with a soft, dry cloth. Accumulated dust might cause fire or electric shock. Do not install the device in locati
Summary of the content on the page No. 15
Turn the scanner OFF if it is damaged. If the scanner is damaged for any reason, turn off the scanner and unplug the power cable before contacting the store where you purchased the scanner. Do not put liquids inside the scanner. Do not insert or drop metal objects into the scanner. Do not scan wet documents or documents with paper clips or staples. Do not splash or allow the scanner to get wet. If foreign objects (water, small metal objects, liquids, etc.) get inside the scanner, immediatel
Summary of the content on the page No. 16
CAUTION The following describes important cautions described in this manual. Do not install the scanner on unstable surfaces. Install the scanner on a desk or table, so that none of its parts protrude outside of the desktop. Also, make sure that the scanner is installed on a flat, level surface. Do not install the scanner on unstable surfaces. Install the scanner on a level surface that is free of vibration to prevent it from tilting. Install the scanner on a strong surface that will support
Summary of the content on the page No. 17
Before moving the scanner, disconnect the power plug from the power outlet. Do not move the scanner with the power and interface cables connected as this might damage the cables, causing fire, electric shock or injuries. Before moving the scanner, be sure to disconnect the power plug from the power outlet, and disconnect connector cables. Also, make sure that the floor is free of obstructions. Protect the scanner from static electricity. Install the scanner away from strong magnetic fields a
Summary of the content on the page No. 18
Disconnect the power plug from the power outlet when the scanner is not used for a long period of time. When the scanner is not used for a long period of time, be sure to disconnect the power plug from the power outlet for safety. Do not install the scanner in the direct sunlight. Do not install the scanner in the direct sunlight or near heating apparatus. Doing so might cause excessive heat to build up inside the scanner, causing fire or scanner trouble. Install the scanner in a well-ventil
Summary of the content on the page No. 19
■ FUJITSU Group Offices Please send your comments on this manual or on FUJITSU products to the following addresses: FUJITSU COMPUTER PRODUCTS OF FUJITSU CANADA, INC. AMERICA, INC. 6975 Creditview Road Unit 1 1255 East Arques Avenue Sunnyvale, Mississauga, On L5N 8E9 Canada CA 94085-4701, U.S.A. Phone: (1-905)286-9666 Phone: (1-408)746-7000 Fax: (1-905)286-5988 Technical Assistance Center: Website: http://www.fujitsu.ca/ (1-800)626-4686 E-mail: imaging@fujitsu.ca Fax: (1-408)746-6910 (For S
Summary of the content on the page No. 20
FUJITSU TAIWAN LTD. FUJITSU HONG KONG LTD. 19th Fl., No39, Sec.1,Chung-hwa Rd., 10/F., Lincoln House, 979 King's Road, Taipei, Taiwan Taikoo Place, Island East, Hong Kong Phone: (886-2)2311-2255 Phone: (852)2827-5780 Fax: (886-2)2311-2277 Fax: (852)2827-4724 Website: http://tw.fujitsu.com/ Website: http://hk.fujitsu.com/ E-mail: scanner@fujitsu.com.hk FUJITSU SYSTEMS BUSINESS FUJITSU KOREA LTD. (THAILAND) LTD. Susong Tower Building, 83-1 12th Fl., Olympia Thai Tower, 444 Susong-Dong, Jongno-Gu
