Summary of the content on the page No. 1
LevelOne
Broadband Routers
FBR-1100TX
FBR-1400TX
FBR-1401TX
FBR-1700TX
User's Guide
Summary of the content on the page No. 2
Summary of the content on the page No. 3
TABLE OF CONTENTS CHAPTER 1 INTRODUCTION .............................................................................................................. 1 Features of your LevelOne Broadband Router............................................................................ 1 Package Contents ............................................................................................................................. 4 FBR-1100TX .....................................................................
Summary of the content on the page No. 4
Printer Port.....................................................................................................................................76 MAC Address ..................................................................................................................................77 Routing .............................................................................................................................................78 APPENDIX A TROUBLESHOOTING.............................
Summary of the content on the page No. 5
Chapter 1 Introduction 1 This Chapter provides an overview of the LevelOne Broadband Router's fea- tures and capabilities. Congratulations on the purchase of your new LevelOne Broadband Router. The LevelOne Broadband Router is a multi-function device providing the following services: • Shared Broadband Internet Access for all LAN users. • Network Printer - LAN users can share the printer attached to the LevelOne Broadband Router (For LevelOne 1 Port Broadband Router with 4 LAN Port, Printer S
Summary of the content on the page No. 6
LevelOne Broadband Router User Guide • PPPoE and PPTP Support. The Internet (WAN port) connection supports PPPoE (PPP over Ethernet) and PPTP (Peer-to-Peer Tunneling Protocol), as well as "Direct Con- nection" type services. • Fixed or Dynamic IP Address. On the Internet (WAN port) connection, the Leve- lOne Broadband Router supports both Dynamic IP Address (IP Address is allocated on connection) and Fixed IP Address. Advanced Internet Functions • Conferencing & Telephony Applications. Inte
Summary of the content on the page No. 7
Introduction • Windows peer-to-peer printing over TCP/IP, using the supplied port driver. • Windows LPD printing, using a Windows Server running NT 4.0 or Windows 2000 Server. In this situation, no software needs to be installed on the client PCs. • Unix LPD printing. No additional software needs to be installed. Configuration & Management • Easy Setup. Use your WEB browser from anywhere on the LAN for configuration. • Remote Management. The LevelOne Broadband Router can be managed from any P
Summary of the content on the page No. 8
LevelOne Broadband Router User Guide Package Contents The following items should be included: • The LevelOne Broadband Router Unit • Power Adapter • Quick Installation Guide • CD-ROM containing the on-line manual and Print Port Driver for Windows The Print Port Driver for Windows is provided only for the FBR-1401TX and the FBR-1700TX. If any of the above items are damaged or missing, please contact your dealer immediately. FBR-1100TX LEDs - FBR-1100TX There are 2 LEDs on the top of the unit. Th
Summary of the content on the page No. 9
Introduction Components - FBR-1100TX Figure 2: Components - FBR-1100TX LED Link Indicator On - WAN connection (to broadband modem) is established. 1 (WAN Port) Off - No WAN connection (to broadband modem) Flashing - Data is being transmitted or received via the WAN port. WAN port Connect the 10BaseT cabling (RJ45 connector) for the 2 (10BaseT) External LAN, WAN, or DSL/Cable Modem here. LAN port Connect the LAN cable (RJ45 connectors) from this port to a 3 (Auto-sensing 10BaseT or 100BaseT hu
Summary of the content on the page No. 10
LevelOne Broadband Router User Guide using the factory default values. Power port (12V) Connect the power adapter here. 6 WAN Data This will flash during normal operation, when data is trans- 7 LED mitted or received through the WAN port. LAN Data/Status LED During normal operation, this will flash in Green. Orange 8 indicates an error. See the following LED Table for more information. Refer to the following table. DIP switches 9 DIP switches DIP Switch Setting Description 1=off Normal Operati
Summary of the content on the page No. 11
Introduction You can now connect to the LevelOne Broadband Router and make any configuration changes required 7
Summary of the content on the page No. 12
LevelOne Broadband Router User Guide FBR-1400TX LEDs - FBR-1400TX Power On - Power on. Off - No power. Status (Red) On - Error condition. Off - Normal operation. Blinking - This LED blinks during start up. LAN: On - LAN connection is using 10BaseT. Link/Act Off - No 10BaseT LAN connection. Flashing - Data is being transmitted or received via the LAN port. LAN: 100 On - LAN connection is using 100BaseT. Off - No 100BaseT LAN connection. Flashing - Data is being transmitted or received via the LA
Summary of the content on the page No. 13
Introduction and restore ALL settings to the factory default values. To Clear All Data and restore the factory default values: 1. Power Off. 2. Hold the Reset Button down while you Power On. 3. Keep holding the Reset Button for a few seconds, until the RED LED has flashed TWICE. 4. Release the Reset Button. The LevelOne Broadband Router is now using the factory default values. WAN port Connect the DSL or Cable Modem here. If your modem came with a (10BaseT) cable, use the supplied cable. Othe
Summary of the content on the page No. 14
LevelOne Broadband Router User Guide FBR-1401TX LEDs - FBR-1401TX Power On - Power on. Off - No power. Status (Red) On - Error condition. Off - Normal operation. Blinking - This LED blinks during start up. LAN: On - LAN connection is using 10BaseT. Link/Act Off - No 10BaseT LAN connection. Flashing - Data is being transmitted or received via the LAN port. LAN: 100 On - LAN connection is using 100BaseT. Off - No 100BaseT LAN connection. Flashing - Data is being transmitted or received via the LA
Summary of the content on the page No. 15
Introduction Components - FBR-1401TX Figure 4: Rear Panel - FBR-1401TX Reset Button This button has three (3) functions: • Reboot. When pressed and released, the LevelOne Broadband Router will reboot (restart). • Diagnostic print-out. If held down for 3 seconds, a diagnostic print-out will be sent to the attached printer. • Ensure the printer is ready. • Both Print LEDs will flash simultaneously during the diag- nostic printing. • Clear All Data. This button can also be used to clear ALL
Summary of the content on the page No. 16
LevelOne Broadband Router User Guide FBR-1700TX LEDs - FBR-1700TX Power ON - power on OFF - no power Status (Red) ON indicates an error condition. Blinking - during start up, this LED will blink. WAN: Link ON - WAN connection is established. OFF - no WAN connection. WAN: Act Flashing - data is being transmitted or received via the WAN port. OFF - no data is being transferred. LAN: There are 7 LEDs - one for each LAN port, and each LED could be OFF, 10M/Act Yellow, or Green. 100M/Act • OFF - No
Summary of the content on the page No. 17
Introduction Components - FBR-1700TX Figure 5: Rear Panel - FBR-1700TX Power port (9V) Connect the supplied power adapter here. Uplink Port Use the "Uplink" port ONLY to connect to a normal port on another hub. If the "Uplink" port is used, port 7 can not be used. 10/100BaseT Use standard LAN cables (RJ45 connectors) to connect this port LAN connectors to your PCs. Both 10BaseT and 100BaseT connections can be (Switching hub ports) used simultaneously. If port 7 is used, the "Uplink" port can
Summary of the content on the page No. 18
LevelOne Broadband Router User Guide DIP Switches DIP Switch Setting Description 1=off Normal Operation. 2=off 1=off DHCP Server function disabled. 2=on 1=on Used to restore Default IP Address 2=off and clear Password (See below). 1=on Normal Operation. 2=on Restore Default IP Address and Clear Password If the LevelOne Broadband Router's IP Address or password is lost, the following procedure can be used to recover from this situation. 1. Turn the power to the LevelOne Broadband Router OFF. 2.
Summary of the content on the page No. 19
Chapter 2 Installation 2 This Chapter covers the physical installation of the LevelOne Broadband Router. Requirements • Network cable - standard 10/100BaseT network (UTP) cable with RJ45 connectors. • TCP/IP protocol must be installed on all PCs. • DSL or Cable modem, and an Internet Access account with an ISP, for shared Internet access. Installation Procedure - FBR-1100TX Figure 6: Installation Diagram 1. Choose an Installation Site Select a suitable place on the network to install the Level
Summary of the content on the page No. 20
LevelOne Broadband Router User Guide 3. Connect WAN Cable Connect the DSL or Cable modem to the WAN port on the LevelOne Broadband Router. Use the cable supplied with your DSL/Cable modem. If no cable was supplied, use a stan- dard cable. 4. Power Up • Power on the Cable or DSL modem. • Connect the supplied power adapter to the LevelOne Broadband Router and power up. Use only the power adapter provided. Using a different one may cause hardware damage 5. Check the LEDs • When the LevelOne Broad
