Black & Decker Linea Pro KG915 user manual

Summary of the content on the page No. 1

Advertencia: Léase este instructivo antes de usar el producto.
Warning: Read instruction manual before using product.

Summary of the content on the page No. 2

Summary of the content on the page No. 3

Summary of the content on the page No. 4

?

Summary of the content on the page No. 5

Summary of the content on the page No. 6

Summary of the content on the page No. 7

Summary of the content on the page No. 8

Summary of the content on the page No. 9

Summary of the content on the page No. 10

KG915 Voltaje AR, B2C, B2 220V Voltaje B3, BR 120V/127V 5/8"-11 / M14

Summary of the content on the page No. 11

ENGLISH ANGLE GRINDER KG915 Know your tool CONGRATULATIONS! You have chosen a Black & Decker tool. Our aim is to provide quality tools at an affordable price. Warning! When using mains-powered We hope that you will enjoy using this tool for tools, basic safety precautions, many years. including the following, should always be followed to reduce the risk of fire, INTENDED USE electric shock, personal injury and Your Black & Decker angle grinder has been material damage. designed for cutting metal

Summary of the content on the page No. 12

ENGLISH General 12.Extension cables Before use, inspect the extension cable and 1. Keep work area clean replace if damaged. When using the tool Cluttered areas and benches can cause accidents. outdoors, only use extension cables intended 2. Consider work area environment for outdoor use. Do not expose the tool to rain. Do not use the 13.Use appropriate tool tool in damp or wet conditions. Keep the work The intended use is described in this instruction area well lit. Do not use the tool where the

Summary of the content on the page No. 13

ENGLISH Keep handles and switches dry, clean and free - Do not let children or pregnant women enter from oil and grease. the work area. 20.Repairs - Do not eat, drink or smoke in the work area. This tool complies with relevant safety - Dispose of dust particles and any other requirements. Repairs should only be carried debris safely. out by qualified persons using original spare parts; otherwise this may result in considerable danger to the user. ELECTRICAL SAFETY The electric motor has been des

Summary of the content on the page No. 14

ENGLISH ASSEMBLY Fitting and removing grinding or cutting discs (fig. A, D - G) Before attempting any of the following Always use the correct type of disc for operations, make sure that the tool is switched off and unplugged and that the your application. Always use discs with the disc has stopped rotating. correct diameter and bore size (see technical data). Removing and refitting of the guard The maximum thickness for grinding discs is 6 mm, for cutting discs 3.5 mm. Never use the tool without

Summary of the content on the page No. 15

ENGLISH Fitting Hints for optimum use Remove the guard as described above. Firmly hold the tool with one hand around the Place the inner flange (12) onto the spindle (9) side handle and the other hand around the as shown (fig. H). Make sure that the flange is motor housing (fig. K). correctly located on the flat sides of the spindle. When grinding, always maintain an angle of Place the backing pad (16) onto the spindle. approx. 15° between the disc and the workpiece Place the sanding disc (17) o

Summary of the content on the page No. 16

Solamente para propósito de Argentina: Importado por: Black & Decker Argentina S.A. Pacheco Trade Center Colectora Este de Ruta Panamericana Km. 32.0 El Talar de Pacheco Partido de Tigre Buenos Aires (B1618FBQ) República de Argentina No. de Importador: 1146/66 Tel. (011) 4726-4400 Imported by/Importado por: Black & Decker do Brasil Ltda. Rod. BR 050, s/n° - Km 167 Dist. Industrial II Uberaba ˆ MG ˆ Cep: 38064-750 CNPJ: 53.296.273/0001-91 Insc. Est.: 701.948.711.00-98 S.A.C.: 0800-703-4644